Environmental Monitoring Instruments

Product Details:

Color LCD display, the readings are clearly displayed, and the test results are clear at a glance.

PM2.5 test probe is used to support PM1.0, PM2.5 and PM10 detection.
Support different interface display, User friendl operation.

PM2.5, HCHO and TVOC super alarm and timely alarm.

Built-in high-capacity lithium battery, long battery life.
Range
PM 2.5: Main for smog PM1.0 and PM10 are sameHCHO: Formaldehyde;TVOC: is main for benzene,etc Volatile organic compounds;AQI: is for Integrated air quality index.
  Display mode: LCD screen displayWorking principle : Electrostatic technologyPower: 5V (built-in rechargeable battery)Power mode : USBInput: AC100-240V 50/60HZ 0.15ARated output voltage: 5VRated output current: 1AMeasuring range: 0-1.999MG /M3 (Formaldehyde) 0-9.999MG/M3(TVOC)Continuous working time : 1-300 (min)Applicable area : 21m2 (including) -30m2 (inclusive)Size: about 155*87*35(mm)/6.10*3.43*1.38in
Safe range for formaldehyde (HCHO) and TVOC
HCHO≤ 0.10mg / m3TVOC≤ 0.60mg / m3According to ("indoor air quality standards" GB / T 18883-2002 andGB 50325-2001 Class II civil construction).
PM2.5 data are changing all the times, with the air, wind, humidity and other environmental factors change, in the room smoking, cooking fumes, car exhaust emissions, coal, chimney,furnace Such as pollution sources will change the PM2.5 value of this area, resulting in differences in the detection data.

we are engaged in providing the broad assortment of Dewpoint and relative humidity meters, thermometers, digital thermometers, hygrometers, data loggers, moisture meters and anemometers to monitor climatic conditions.

Using state of the art electronics "Dewpoint Meter" is rugged instrument designed to measure and record all relevant climatic parameters required to determine the all critical conditions. Dewpoint meter can be used as a hand-held gauge with data logger - ideal for monitoring climatic conditions over a period of time.

large and easy to use illuminated display, users can record climatic parameters and use the 10 reading rolling memory.

• A hand-held Dewpoint meter with manual and interval data logging in one gauge
• Integrated magnets allow remote data monitoring on steel substrates
• Dustproof and waterproof gauge with fully sealed sensors (equivalent to IP66)
• Visual and audible indication of user defined limits against any or all parameters
• Large, customer definable illuminated display operates over the full temperature range
• Store 25,000 records in up to 999 batches
• USB and Bluetooth data output to a PC or PDA
• Readings are switchable between Celsius and Fahrenheit
• Time and date stamp is recorded for each set of readings
• Arrow indicators show temperature trends
• Integrated K-Type connector allows measurement of surface temperature during remote logging
• Hold/freeze function allows manual readings to be taken and reviewed before being logged into memory
• Adjustable limits can be set for each measurement parameter which triggers visual and audible alarms whenever a limit is exceeded - even if it is not displayed on the screen
• Clear, illuminated display showing up to five parameters from
  RH % Relative Humidity
  Ts Surface Temperature
  Ta Ambient Air Temperature
  Td Dewpoint Temperature
  T the difference between the Td and Ts
  Tdb Dry Bulb Temperature
  Twb Wet Bulb Temperature
  SH Specific Humidity
• Data can be downloaded to a PC via USB or Bluetooth and evaluated using ElcoMaster 2.0 Software

Dew point meter is comply with many international standards like
BS 7079-B4, IMO MSC.215(82), IMO MSC.244(83), ISO 8502-4, US Navy NSI 009-32,
US Navy PPI 63101-000

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

Product Details:

we are engaged in providing the broad assortment of RH / Dew point /Moisture Meter and Hygrometers.

Hygrometer provides a simple and fast measurement of relative humidity (RH) and surface temperature (Ts) and is ideal for use in very hot climates.

Hygrometer has been specifically designed for use in very hot climates where the surface temperature of the substrate can exceed the paint manufacturer's recommended limits for successful painting.

Painting outside recommended limits can have a detrimental affect on the performance and lifetime of the coating.

Instead of using hygrometers conversion disks and charts there are gauges on the market, such as the Elcometer 308 & Elcometer 309, which will instantly take all the measurements and perform all the calculations.

The digital hygrometers are more accurate and reliable and allow users to take various and repetitive measurements to monitor the climatic conditions during a period of time. The Elcometer 308 Digital Hygrometer provides the surface temperature and relative humidity, whereas the Elcometer 309 Delta T Hygrometer measures Delta T - the difference between the surface temperature and the dewpoint temperature, and relative humidity.

Key features of the Hygrometer include:

• Rugged design: Suitable for use in extreme environments the Elcometer 308 Hygrometer is dustproof and waterproof with fully sealed sensors.
• Measurement Hold / Release function: With a single button press readings are 'held' on the screen. These can then be recorded before simply pressing the button again to 'release' the screen and continue to take further readings as necessary.
• Backlight: Bright screen making information easy to read - ideal in dark or confined spaces.

Additional Information:

• Packaging Details: Elcometer 308 Hygrometer, wrist strap, 2 x AA batteries, protective pouch with belt clip, RH & surface probe calibration certificate and operating instructions

Product Details:

For a long time, infrared thermal imaging detection technology has become an important means to ensure Industrial safety in developed countries. Theapplication field includes electric power, metallurgy, petro-chemistry, machinery,coal, traffic, fire control and national defense, etc. It can not only carries out real-time detection at high voltage, high current and high speed operation to perform real-time detection for production and

instrument but also need not power off the power supply, stop the machine or stop the production to find the potential problems and prevent occurrence of malfunction. The “non contact” modern detection technology

is safe, reliable and quick. It is a type of technical revolution compared with traditional contact detection method.

This product is an infrared camera that integrates surface temperature measurement and real-time thermal image. The traditional inferred thermometer needs to measure every component one by one while it is not necessary for infrared imaging camera, thus saving time. The potential problems may be displayed on color display screen clearly. Moreover, the central point measurement cursor is used to locate quickly and accurately to measure the temperature of the target object.In order to increase the differentiation, the product is provided with a visible light camera. The thermal images and visible images are stored in the device and can be read through USB or stored in a computer to generate a report or for print. With small volume, the product is easy to operate and has strong function. it is the ideal selection for electric power, electronic manufacturing, Industrial inspection and other fields.

The following major functions increase the product’s accuracy and usability: 

. The radiation coefficient may be adjusted to increase the measurement accuracy of objects with half reflection surface.
. The highest temperature and lowest temperature cursor may guide the users to the areas with highest and lowest temperature of the thermal images.   
. The selectable color palette. 

Product Details:

The Elcometer 213/2 Digital Waterproof Thermometer offers the latest microprocessor technology, superior durability and is designed for reliability and ease of use.

Features:

• Rubber bumper seals for impact resistance
• Waterproof case (IP66 & IP67 protection)
• Extruded aluminium case for superior durability
• °C/°F switchable
• Easy to read LCD display

Probes are available to purchase separately.

Additional Information:

• Packaging Details: Elcometer 213/2 Digital Waterproof Thermometer, battery, carry case and operating instructions, Magnetic Surface Probe; 13mm (0.51") Diameter, Surface Probe; 130 x 4.2mm (5.11 x 0.17¿¿¿) Diameter, Liquid Probe; 130 x 3mm (5.11 x 0.12¿¿¿) Diameter, Needle Probe; 130 x 3mm (5.11 x 0.12¿¿¿) Diameter

Product Details:

This product is an infrared camera that integrates surface temperature measurement and real-time thermal image. The traditional inferred thermometer needs to measure every component one by one while it is not necessary for infrared imaging camera, thus saving time. The potential problems may be displayed on color display screen clearly. Moreover, the central point measurement cursor is used to locate quickly and accurately to measure the temperature of the target object.In order to increase the differentiation, the product is provided with a visible light camera. The thermal images and visible images are stored in the device and can be read through USB or stored in a computer to generate a report or for print. With small volume, the product is easy to operate and has strong function. it is the ideal selection for electric power, electronic manufacturing, Industrial inspection and other fields.

The following major functions increase the product’s accuracy and usability: 
. The radiation coefficient may be adjusted to increase the measurement accuracy of objects with half reflection surface.
. The highest temperature and lowest temperature cursor may guide the users to the areas with highest and lowest temperature of the thermal images.   
. The selectable color palette.

Display screen :2.8 ″ full angle TFT display

Infrared image resolution : 220x160

Field angle : 35°×26°

Temperature measurement range : -20??? to 450??? (-4°F to 842°F)

Measurement accuracy : ±2???/±2% (Greater than 300 ???accuracy is ± 5%)

Visible image resolution : 300,000 pixel 

LCD resolution : 320×240

Shortest focusing distance : 0.5M

Shortest focusing distance : 70mK

Emissivity : Adjustable from 0.01 to 1.00

Frame rate of thermal images : 9Hz

Wavelength coverage : 8-14um

Focus mode : Fixed

Color palette : Rainbow, iron oxide red, cold color, black & white, white & black

Storage capacity : 20000 image storage

Product Details:

we are engaged in providing the wide range of Dew Point Meters and Hgrometer.

The Elcometer 116A Whirling Hygrometer is designed to measure the ambient relative humidity from which the dewpoint temperature can be calculated. The Elcometer 116A Whirling Hygrometer is scaled in degrees Celsius. A simple Relative Humidity Guide is provided but more accurate results can be obtained using the Elcometer 114 Dewpoint Calculator.

USING WHIRLING HYGROMETER 

1. Fill the reservoir with distilled water.

2. Check that the wick covers the bulb of the wet thermometer

fully and is saturated with water.

3. Hold the handle of the hygrometer and whirl it for 20 to 40

seconds.

4. Quickly read the wet thermometer and whirl the hygrometer

again.

5. Repeat steps 3 and 4 until consecutive readings are the

same. Read the wet & dry thermometers.

6. Calculate the wet bulb depression, ie, the difference between

the dry and wet bulb temperatures.

7. Use the table to find Relative Humidity (%RH).

Eg. Temperatures, dry 20°C, wet 15°C;

Depression (20-15) = 5°C; Relative Humidity: 59%

(See value at intersection of dry bulb column and depression row)

To calculate Dewpoint:

On the bulb scale, use the wet bulb reading and move down the column to the Relative Humidity which

is closest to the calculated value, read depression. So if RH is 58%, depression is 4.5°C;
Dewpoint = wet bulb - depression = 15 - 4.5 = 10.5°C.

 ACCURATE USE

To achieve an accurate measurement of wet bulb temperature :

• Keep the wick clean, tight fitting, fully over the thermometer bulb and saturated with distilled water.
• Evaporate the maximum amount of water from the wet bulb by whirling the hygrometer faster than 180rev/min.

• Minimise the effect of your body by holding the hygrometer in front of you, facing the wind. On a still day walk forwards while whirling.

• Reduce environmental effects by not whirling in direct sunlight or near heat sources.

• Read the wet bulb temperature as soon as whirling has stopped and do not touch the thermometer while taking readings.

• Only use values when consecutive readings are the same. Incorrect use of the hygrometer will result in the wet bulb temperature, and consequently %RH and dewpoint, being too high. For greater calculation accuracy, use the Elcometer 114 Dewpoint calculator or psychrometric tables. 

TECHNICAL SPECIFICATION :

• Dimensions: 230 x 80 x 28mm

• Range: -5°C to 50°C

• Weight: 300g (0.6lb)

Relative Humidity Table

                       Accuracy      Range
%RH                  ±2%          1 - 99%
RH Dewpoint       ±2°C         0 - 20°C
Dewpoint            ±6°C           >20°C

 

Additional Information:

• Packaging Details: Elcometer 116 Whirling Hygrometer or Elcometer 116 Sling Hygrometer, slide rule table and operating instructions

Product Details:

we are engaged in providing the wide range of Dew Point meters.

The uniquely compact Sling Psychrometer accurately determines percent relative humidity without the necessity of consulting complex tables. There is no need to wet the wick each time a reading is taken; the Sling Psychrometer contains a slide rule calculator which correlates wet and dry bulb thermometer indications for direct reading of relative humidity. When not in use, the thermometer case telescopes into the handle for protection.

Features:

• Designed for portability (7.5” long x 1” diameter)
• Slide rule construction quickly converts temperature to relative humidity
• Built-in water reservoir holds sufficient water for several hours of testing
• Thin bulb design gives fast thermal response
• Thermometers constructed of shock-resistant glass;stems have deep-etched numerals and 1° scale divisions for easy reading
• Accurate to within ±5% R.H.

Additional Information:

• Packaging Details: Elcometer 116 Sling Hygrometer, slide rule table and operating instructions

Product Details:

Paper moisture meter is a high-performance and digital moisture testing equipment firstly launched in our country by our company based on introduction of foreign advanced technology.The instrument adopts high frequency principle,digital display, sensors and main body together as one, equipped with ten gear is used to measure different kinds of papers, This moisture meter have high precision measuring instruments, and the small size,light weight,portable on-site testing.

This instrument adopted the high frequency principle based on the introduction of the most advanced technology. In other words,there is a fixed frequency inside the equipment. Once the moisture of the detected objects carried, the frequency through the sensor will be different. The deference between the frequencies will be displayed in figure after the conversion by current-frequency converter.

Features:

• Integrative design convenient to carry outdoor Application also.
• Digital display with back light gives exact and clearly reading.
• Small in size, light in weight ,easy to carry out.
• Manual off at any time. Auto power off after 5 minutes from last operation.

Specification:

• Display:4 digital LCD
• Measuring range: 0%-80%
• Operating conditions: Temperature:0-60 , Humidity:5%-90%
• Resolusion:0.1
• Accuracy: ± 0.5%n
• Power supply: 9V battery
• Dimensions: 160mm×60mm×25mm
• Weight: 203g ( Excluding Battery)

Additional Information:

• Packaging Details: Paper Moisture Meter, Operating manual, Carrying Case

Dewpoint Calculator provides accurate values of Dewpoint and Relative Humidity (RH) from the wet and dry bulb temperatures measured by a Whirling or Sling Hygrometer.

The range of the Dewpoint Calculator is -10°C to 50°C (14°F to 122°F) and has an accuracy of ±1% with respect to standard tables.

We are engaged in providing the broad assortment of Humidity /Moisture/Dew Point Meters.

Delta T Hygrometer provides a simple and fast measurement of Delta T temperature and relative humidity.

Delta T (TΔ) is the difference between the surface temperature (Ts) and the dewpoint temperature (Td). When TΔ is less than 3ºC (5ºF) painting should not occur.

Relative Humidity (RH)- expressed as a percentage, RH is the ratio of the amount of water vapour actually held by the air compared to the maximum amount of water vapour the air could hold at a given temperature. Typical maximum RH values specified by paint manufacturers are between 75% and 85%.

Delta T Hygrometer key features include:

• Rugged design: Suitable for use in extreme environments the digital hygrometer is dustproof and waterproof with fully sealed sensors.

• High / Low Limits: Displayed on screen graphically as either (?) or (X) with flashing Red or Green LED’s to indicate pass or fail.
  • Delta T Temperature: TΔ is pre-set at >3ºC (>5ºF), the industry norm.
  • Relative Humidity: User definable upper limit can be set for RH

• Measurement Hold / Release function: With a single button press readings are ‘frozen’ on the screen. These can then be recorded before, simply pressing the button again to ‘unfreeze’ the screen and then take further readings as necessary.

• Backlight: Provides clearly lit information – ideal in dark or confined spaces.

we are engaged in providing the broad assortment of Dewpoint and relative humidity meters, thermometers, digital thermometers, hygrometers, data loggers, moisture meters and anemometers to monitor climatic conditions.

Anemometer is a portable, pocket size instrument for taking accurate readings of wind speed.

The lightweight impeller with high precision jewel bearings provides very accurate airflow measurements even at low speeds. The anemometer's impeller can easily be replaced without the need to return the unit to Elcometer.

The wind speed can be displayed in various measurement units; indicating current speed, maximum speed or average speed.

 

• Rugged and durable: Anemometer is made from high impact injection moulded plastic and corrosion resistant materials.

• Waterproof: Waterproof equivalent to IP67 with fully sealed electronics. Will also floatin water if dropped.

• Clear LCD Display: Easy to read, large 9mm digits.

• Choice of measurement units:
  • Beaufort Force
  • Knots
  • Kilometres per hour
  • Metres per second
  • Miles per hour
  • Feet per minute

Product Details:

The Elcometer 210 Paint Thermometer is used to accurately measure paint temperature.

It is often important to ensure the temperature of the paint to be applied is at a temperature which will ensure correct application.

The Elcometer 210 Paint Thermometer is supplied with a clip to enable the thermometer to be hooked on to the edge of a paint can allowing accurate temperature measurement of the paint.

Product Details:

The Elcometer 113 Magnetic Thermometer continuously indicates the surface temperature of steel and other magnetic material.

The magnetic thermometers are based on a bimetallic strip and therefore do not require batteries but do require time to adjust to the temperature.

Available in a number of scale ranges, the Elcometer 113 surface thermometer is also available as an economy version.

Additional Information:

• Packaging Details: Elcometer 113 Magnetic Thermometer and protective pouch

Product Details:

The Elcometer 212 is a digital, pocket size thermometer ideal for day to day use.

Incorporating a fast response stainless steel liquid or surface probe, the Elcometer 212 provides temperature readings in under four seconds.

Housed in a water resistant case with integrated rubber seals and a moulded flush window, preventing dirt and leaks damaging the LCD display, the Elcometer 212 is ideal for use in the harshest of environments.

The probe conveniently folds back into the side of the instrument, preventing damage when not in use.

• Liquid or surface probe options available
• User switchable between °C and °F
• Resolution can be set to 0.1°C (0.1°F) or 1°C (1°F)

Additional Information:

• Packaging Details: Elcometer 212 Digital Pocket Thermometer with batteries fitted and operating instructions

The monitoring of climatic conditions such as temperature, relative humidity, dewpoint and moisture in industry is often vital to the success of the application of a coating. These parameters determine both the conditions for the application of the coating, and the resulting quality and performance of the coated product.

Magnetic Surface Probe 1mm (0.51") Diameter Range: -50 to 150ºC (-58 to 302ºF)

Surface Probe 130 x 4.2mm (5.11 x 0.17”) Diameter Range: -50 to 600ºC (-58 to 1112ºF)

Liquid Probe 130 x 3mm (5.11 x 0.12”) Diameter Range: -200 to 1100ºC (-328 to 2012ºF)

Needle Probe 130 x 3mm (5.11 x 0.12”) Diameter Range: -50 to 400ºC (-58 to 752ºF)

The monitoring of climatic conditions such as temperature, relative humidity, dewpoint and moisture in industry is often vital to the success of the application of the coating. These parameters determine both the conditions for application of a coating, and the resulting quality and performance of the coated product.

It is a portable laboratory instrument which records the ambient temperature from -15°C to 65°C (5°F to 149°F) and relative humidity (0 to 100% RH) using the hair hygrometer principle.

As a prominent solution provider we are engaged in broad assortment of material testing instrument.

Hot Wire Anemometer is a complex and delicate instrument, its durable structure will allow many years of use if proper operating techniques are developed. This is to be used for HVAC Applications and Air Ducts.

ø Thermal anemometer, available for very low air velocity measurement.

ø Slim probe, ideal for grilles diffusers.

ø Combination of hot wire and standard thermistor, deliver rapid and precise measurements

ø Records maximum/minimum readings with recall data hold.

ø Microprocessor circuit assures maximum possible accuracy, provides special functions and features.
Super large LCD display with backlight, reading the air velocity temp. at the same time.

ø Data Hold.

ø Power supply by 3.7V Rechargeable Battery.

ø The portable anemometer provides fast, accurate readings, with digital readability Multi-functions for air flow measurement: m/s, km/h, ft/min, MPH, Knots build in temperature ºC / ºF Thermistor sensor for Temperature measurement, fast response time.

ø Probe length for shortest 0.32m, 1.15m for the longest elongation.

ø Line Length is 1.75m Applications: Environmental testing, Air conveyors, Flow hoods, Clean rooms, Air velocity, Air balancing, Fans/motors/blowers, Furnace velocity, Refrigerated case and Paint spray booths.

Application
Air conveyors, Flow hoods, Clean rooms,Air velocity, Air balancing, Fans/motors/blowers, Furnace velocity,Refrigerated Case, Paint spray booths.

Product Details:

The Cup Grain Moisture Meter is used for fast and accurate measurement of moisture content in grains,including wheat,rice,soy bean,rapeseed and other grains and seeds.

Features:

• Able to measure grains up to 20 species.
• The cup type measurement causes small error.
• Wide measuring range.
• Temperature and volume of grains can Display

Specifications:
 

• Measuring object:

nonmetallic granulated materials such as cereal, wheat, rapeseed, soybean, vegetable seeds, corn, feed and so on

• Measuring error: ≤±0.5 %( main moisture range)
• Repeat error: ≤ 0.2%
• Measuring range: 3-35%
• Working environment: 0-40°C
• Temperature compensation: automatic
• Attached function:

Volume-weight conversion display,
Sample weight display,
Temperature display,
Average moisture content calculation

• Calibration:

4 points calibration, unlimited sample (20 common varieties have been calibrated in advance, can be tested directly)

• Power supply:

AC/DC, 4x1.5 AA size battery/special external power adapter

• Weight: 3.8KG
• Dimensions: 36*43*24CM

 

Additional Information:

• Item Code: Apan-GMM-02
• Delivery Time: Ex.stock
• Packaging Details: Grain Moisture Meter, Operating Manual, Carrying Case

Product Details:

The Grain Flour Moisture Meter is used for fast and accurate measurement of moisture content in the process of allotment, acquisition, storage,machining of packed grain flours.

Features:

* Its integrative design convenient to carry outside for testing.

* Digital display with back light gives exact and clearly reading although you stay at the somber conditions.

* It is small in size, light in weight ,easy to carry out for fieldwork if needed.

* Auto power off after 5 minutes from last operation.

Specifications:
Display:4 digital LCD
Measuring range :6%-30%
Operating conditions:
Temperature:0-60
Humidity:5%-90%
Resolusion:0.1
Accuracy: ± 0.5%n
Operation:
Electrical Resistance Method, Automatic temperature Compensation
Power supply:
4x1.5 AAA size (UM-4) battery
Dimensions:
460mm×75mm×35mm

Needle:280mm
Weight:203g (not including batteries)
Grains Flour :11 Type

Additional Information:

• Item Code: Apan-GMM-2PIN-03
• Delivery Time: Ex.Stock

we are engaged in providing the broad assortment of material testing instruments like Coating, corrosion, NDT instruments.

The natural feel of the moisture meter makes it easy to use, allowing the pins on the end of the instrument to be pressed into the material to be measured.

The thin pins allow easy measurement of the moisture content of sawn timber/Wood, chipboard and fibreboard materials up to a maximum thickness of 25mm (0.98”) as well as normal gypsum and mixed plaster.

• Completely automatic instrument setting
• No separate electrodes or leads required
• Handy, quick and pocket-sized for fast measurements
• Correction for two groups of wood species
• Measurement of plaster moisture content with a direct readout in percentage of dry weight
• The Elcometer Moisture Meter uses the conductivity measurement method

we are engaged in providing the broad assortment of Enviromental monitoring Instruments.

Available with pin probes or non-invasive for non-destructive testing, the gauges give average moisture content by comparing the change in impedance between damp and acceptably dry substrates.

• Calibrated ready for use

• Instant readings on a clear, easy to read scale

• Fully portable, battery operated and non-destructive

 

Types of Moisture Meters

On porous materials such as concrete, plaster, brick, wood, the moisture content of the substrate should be measured, as the presence of moisture within a material will result in poor adhesion, premature coating failure and poor appearance.

It is not sufficient to simply ensure that the surface is dry as often the surface of the substrate is the driest point – due to evaporation. It is important to establish the moisture content within the substrate itself.

When powder coating wooden panels, for example, if the wood (or mdf) has too high a moisture content, as the panel passes through the oven, the moisture is heated, generating steam – causing significant coating finish issues.

Applying a coating to a concrete floor which is too damp can cause premature adhesion failure. Moisture meters have been developed to specifically determine the level of moisture in a substrate and come in two forms:

Pin-type moisture meters:
Invasive pins are pushed firmly into the surface of the substrate being measured and by measuring the electrical resistance between the pin electrodes provide the percentage moisture content (%MC) in the substrate.

Pinless, contact-type moisture meters:
Whilst pinless meters typically measure moisture content faster and are non-destructive they do require a relatively flat surface because the sensors are mounted on the base of the gauge making them ideal for concrete.

We are engaged in providing the broad assortment of material testing instruments like Coating, corrosion, NDT instruments.

On porous materials such as concrete, plaster, brick, wood, the moisture content of the substrate should be measured, as the presence of moisture within a material will result in poor adhesion, premature coating failure and poor appearance.

It is not sufficient to simply ensure that the surface is dry as often the surface of the substrate is the driest point – due to evaporation. It is important to establish the moisture content within the substrate itself.

When powder coating wooden panels, for example, if the wood (or mdf) has too high a moisture content, as the panel passes through the oven, the moisture is heated, generating steam – causing significant coating finish issues.

Applying a coating to a concrete floor which is too damp can cause premature adhesion failure. Moisture meters have been developed to specifically determine the level of moisture in a substrate and come in two forms:

Pinless, contact-type moisture meters: Whilst pinless meters typically measure moisture content faster and are non-destructive they do require a relatively flat surface because the sensors are mounted on the base of the gauge making them ideal for concrete.
Measuring Range

70 to 999 relative (non-invasive)

Dry (green); 70 - 169

At risk (yellow); 170 - 199

Wet (red); 200 - 999

7.9% to 99% WME (pin measurement)

Dry (green); 7 - 16.9

At Risk (yellow); 17 - 19.9

Wet (red); 20 - 99.9

Measurement Depth
Non-invasive up to 19mm (3/4")
Pin up to 12.7mm (1/2")

We are engaged in providing the broad assortment of maerial testing instruments like Coating, corrosion, NDT instruments.

Concrete Moisture Meter is an accurate and easy to use non-invasive instrument for non-destructive measurement of moisture content of concrete.

The electrodes transmit parallel low frequency signals, calibrated to give average moisture content by comparing the change in impedance between damp and acceptably dry concrete.

• Calibrated ready for use on concrete
• Instant readings on a clear, easy to read scale
• Fully portable, battery operated and non-destructive

Measuring Range
Concrete 0 - 6%,
Floor screed 0-10%

Substrate Type
Concrete, gypsum floor screed

Measurement Depth
12.5mm (0.5”)

Dimensions
155 x 85 x 43mm (6.1 x 3.3 x 1.7”)

Weight
298g (10.5oz)

Power Supply
9V PP3 battery (6F22 (PP3) type)

Packing List
Concrete Moisture Meter
Battery
Carry case
Calibration certificate
Pperating instructions