Metrology Products

Product Details:

1. Eelectroperm Magnetic Chucks for Horizontal Machining
2. Magnetic Round Chucks for Grinding
3. Electro Magnetic Chucks For Cylindrical Grinding
4. Electromagnetic ChucksElectromagnetic Chucks
5. Multi Coil Electro Magnetic Chucks fine Pitch
6. Multi Coil Micro Fine Pitch Electro Magnetic Chucks
7. Magnetic Round Chucks For Turning
8. Electro Permanent Magnetic Chucks
9. Modular Electro permanent Magnets
10. Electro Permanent Magnetic Round Chucks
11. Fine Pitch Electro Permanent Magnetic Chucks
12. Heavy Duty Fine Pitch Multi Coil Electro Magnetic Chucks

Product Details:

• Compound Angle facility.
• Used for Precision measurement, setting of angles & Light machining.
• Accuracy for Square ness, Flatness & Parallelism within 0.010mm upto 200L & 0.015mm upto 450L.
• Angle can be set within ±5 seconds.
• Centre Distance between rollers is within 0.005mm.
• Made from high quality alloy steel
• Hardness 60 ± 2 Rc & Tempered.
• Magnetic Table for job holding.
• Firm hinged clamp to reduce possibility of distortion.
• Magnetic Chuck with fine Pitch. ( 1.5mm )

Product Details:

• Used for Precision measurement, setting of angles utilizing slip gauge & light machining.
• Ideal for high accuracy grinding operations.
• Accuracy for squareness, Parallelism & flatness is 0.010mm upto 200L & 0.015mm upto 450L.
• Positive locking at all angles without any distortion.
• Angle can be set within ±5 seconds.
• Centre Distance between rollers is within 0.005mm.
• Made from high quality alloy steel Hardness 58 ± 2 Rc & Tempered.
• Firm clamp to reduce possibility of distortion.
• M6 & M8 tapped holes for job clamping.
• Low height for more wheel clearance.
• Slotted sine table on Request.
• Also Manufacture as per customers requirement.

Authorized Dealer for Magnetic V BlockS

 

• Used for Grinding, Light Milling, Drilling & Inspection of Round & Square Jobs.

 

• Accuracy for Flatness, squareness & parallelism :

< 0.005mm upto 150L

0.010mm for 200L

• Hardness : 60 ± 2 RC.

• Available in matched pair.

• Uniform and Strong magnetic pull to all three magnetic surfaces, Top, Bottom & V Faces.

• Easy ON / OFF facility.

• Specific designed V Block for 120° "V" angle available.

 

2 Types of Magnetic V blocks are available

01) All sides Hardened and Ground Magnetic V Block

02) Standard Magnetic ‘V’ Block.

The Bigger V angle & bottom holding surface are equipped with
hardened strips for wear resistance.

 

Authorized Dealer for Magnetic Block and V Block

• Time saving product - Mechanical clamps are avoided.

• Economical for operation & maintenance.

Magnetic Square Block :

• Work piece holding device for Squareness grinding inspection & light machining.

• Accuracy for Squareness & parallelism : < 0.005mm.

• Front magnetic face. 

• Hardened strips provided on all face except back of magnetic face  for wear resistance.

• Operational voltage : 24 VDC, Controlled by Mag-D-Mag with variable control unit.

• DEMAG switch - Easy removal of jobs.

• Battery back-up unit (Optional) 

Magnetic Clamping Block :

• For drilling & light machining.

• Powerful holding with the magnet.

• Vertical lifting force is 35 to 40 kg per cm sq.

As a Authorized dealer we are engaged in providing the broad assortment of various types of Metrology tools used in fabrication and R&D lab natioa wide.

Roller bearing V Block Used to check heavy and odd shaped round jobs and supply with perfectly matched pair. Accuracy of all V Block is Paralality 10 micron for ass series, It also included angle of rollers is 90º.

World class quality bearings are used which are replaceable. Main precautiona taken during design of V block such that Jobs don't get damaged due to bearing on top.

With standard design also special sizes suitable for different diameter are manufactured on demand.

Stainless Steel Grinding Vice used for holding the jobs, spark erosion operation, right angle grinding & Light machining.
Jaw pressure on work piece is forward & downward for repeatable positioning & maximum holding power. Accuracy for Square ness, Flatness & Parallelism within ±0.005mm.

All sides can be used as reference.
• Hardness - 52 ± 3 Rc.
• “V” on moveable jaw for better gripping of round jobs.

Tool Maker Vice used for precision meadurement and inspection precision grinding, EDM and wire - cutting machine. Design and Produced of high quality steel, carburized to W surface hardness : HRC 58 - 62. Parallelism 0.007 mm / 100 mm, squareness 0.015 mm. .

• Quickly to clamp and easy to operate

Precision Grinding Vice used for holding the jobs, right angle grinding & Light machining.
Made from Stainless steel.

Grinding Vice Screw Type used for precision measurement and inspection precision grinding. Designed and developed from high quality steel, carburized W surface hardness : HRC 58 - 62.

• Parallelism 0.007mm / 100 mm, squareness 0.015 mm
• Quickly to clamp and easy to operate
• EDM and wire - cutting machine
• Special size can be Manufactured on request

Insize are well placed to continue to lead the field in the Material Testing, Industrial Metrology, Video Measuring Equipment, Profile Projector, NDT Instruments.

Products:

• BORESCOPE

• CALIPER

• DATA TRANSFER

• DEPTH MEASUREMENT

• FORCE GAGE

• GAGE BLOCKS, PLUG, RING GAGES

• GRANITE AND MACHINE SET UP

• HARDNESS TESTER

• HEIGHT MEASUREMENT

• INDICATOR

• INTERNAL AND EXTERNAL DIAMETER MEASUREMENT

• LAYOUTS TOOLS

• LEVELS

• LINEAR GAGE

• LINEAR SCALES AND COUNTERS

• MICROMETER

• MICROSCOPES

• PROFILE PROJECTOR

• ROUGHNESS TESTER

• RULES, SCRIBERS, ANGLE, TAPER GAGES

• SNAP GAGE

• THICKNESS GAGES

• TOOL SETS

• TORQUE TESTER TORQUE WRENCH

• VISION MEASURING SYSTEM

Insize are well placed to continue to lead the field in the Material Testing, Industrial Metrology, Video Measuring Equipment, Profile Projector, NDT Instruments.