Surface Profile Gauge

Product Details:

• Elcometer 129 Rubert - available in grit and shot versions
• Elcometer 129 Rugotest - shot and grit profiles on the same block

Roughness is displayed in both "classes" and "roughness averages" for easier identification. Available in Metric only.

6 Roughness Values per Comparator.

Additional Information:

• Item Code: Rugotest
• Production Capacity: As per demand
• Delivery Time: Ex.Stock
• Packaging Details: Surface Comparators, Packing Pouch

Product Details:

We are engaged in providing the broad assortment of "Surface Profile Gauge” measurement instruments , that is reliable and easy to use to measure profile of any surface.

For the mechanical surface profile gauges we have the Elcometer 123 Surface Profile gauge used to record the value from the top of the peak to the bottom of the valley measuring the profile height of a surface. This mechanical surface profile gauge is very simple and easy to use to get quick readings, which is ideal for use in explosive areas but users are required to manually record and calculate the average of the spot readings to determine the surface profile. For the digital surface profile gauges we have the Elcometer 224 and 223 Surface Profile Gauge similar to the Elcometer 123, however it provides more of a sophisticated approach into recording readings digitally without having to write it down. Fast, accurate and very user friendly, the Elcometer 224 Surface Profile Gauge can measure the surface profile on either flat or curved surfaces. The Elcometer 223 Surface Profile Gauge measures the peak-to-valley height of a surface in a similar way to the Elcometer 224 Surface Profile Gauge.

The Elcometer 123 Surface Profile Gauge is easy to use gauge measures the peak-to-valley height of a blast cleaned surface. The average of a series of measurements provides an indication of the surface roughness and allows the surfaces to be compared as blasting proceeds.

• Simple and low cost

• Metric and Imperial Version

The Elcometer 123 Surface Profile Gauge can be used in accordance with:

° ASTM D 4417-B

° SANS 5772

° ,US Navy NSI 009-32

° US Navy PPI 63101-000

Additional Information:

• Packaging Details: Elcometer 123 Surface Profile Gauge, glass slide, 2mm allen key, carry case and operating instructions

Product Details:

We are engaged in providing the broad assortment of "Surface Profile Gauge" products. We offer a range of mechanical and digital Surface Profile Gauges that is reliable and easy to use to measure profile of any surface.

Digital Surface Profile Gauge - Insize (2844 Series) 

 

• Measure peak-to-valley height of blast cleaned surface.
• If the profile is too low, the adhesion of the coating to the surface will be reduced.
• If the profile is too high, there is the danger that the profile peaks will remain uncoated, allowing rust spots to occur.
• Meets ASTM D 4417-B
• Zero set block is included, set zero before measurement
• Button function: tolerance Go and No-Go display, data preset, measuring direction change, max./min./TIR measurement, inch/metric conversion, absolute/incremental measurement
• CR2032 battery, automatic power off
• Data ouput
• Stainless steel base
• Optional accessory: data output cable
  (code 7306-40, 7302-SPC3A, 7305-SPC1A)

 

Product Details:

We are engaged in providing the broad assortment of "Surface Profile Gauge" products.

Surface Profile Gauge - Insize (2344 Series) 

• Measure peak-to-valley height of blast cleaned surface.
• If the profile is too low, the adhesion of the coating to the surface will be reduced.
• If the profile is too high, there is the danger that the profile peaks will remain uncoated, allowing rust spots to occur.
• Meets ASTM D 4417-B
• Zero set block is included, set zero before measurement
• Stainless steel base

 

Product Details:

We are engaged in providing the broad assortment of "Surface Profile" products.

Surface Profile Comparator allows the estimation of the roughness of abrasive blastcleaned surfaces by both touch and sight & a reference the blasted profile can be compared to the four reference profile grades in each comparator.

Specifications:

Grit Surface Comparator : 25, 60, 100, 150µm

Shot Surface Comparator : 25, 40, 70, 100µm

Can be used in accordance with:
AS 3894.5, ASTM D 4417-A, IMO MSC.215(82), IMO MSC.244(83), ISO 8503-1, ISO 8503-2

Product Details:

We are engaged in providing the broad assortment of "Surface Profile Gauge" products. We offer a range of mechanical and digital Surface Profile Gauges that is reliable and easy to use to measure profile of any surface.

Digital Surface Profile Gauge is use in surface profile measuring technology for measuring profile on either flat or curved surfaces.

Specification:

Display information : 2.4” (6cm) QVGA colour TFT display, 320 x 240 pixels

Battery type : 2 x AA dry cell batteries, rechargeable batteries can also be used

Battery life : Approximately 24 hours of continuous use at 1 reading per second

Gauge dimensions (h x w x d) : 68 x 73 x 37mm (5.61 x 2.87 x 1.46”)

Gauge weight (including batteries) : 218g (7.69oz)

Measurement range : 0-500μm (0-20mils)

Probe tip : Tungsten carbide tip 60° angle 50μm (2mil)

Operating temperature : -10 to 50°C (14 to 122°F)

Storage temperature : -10 to 60°C (14 to 140°F)

Accuracy: ±5% or ±5μm (±0.2mil)

Resolution : 1μm (0.1mil)

Features :

• Fast, accurate reading rate; 60+ readings per minute
• Repeatable & reproducible measurements
• Easy to use menu structure; in 30+ languages
• Tough, impact, water & dust resistant; equivalent to IP64
• Bright colour screen; with permanent back light
• Scratch & solvent resistant display; 2.4” (6cm) TFT
• Large positive feedback buttons
• USB power supply; via PC
• Test certificate
• Automatic rotating display; 0°, 90°, 180° & 270°
• Ambient light sensor; with adjustable auto brightness
• Emergency light mode
• Gauge software updates; software
• Data output
• USB; to computer
• Bluetooth®: to computer, Android™ mobile phone or tablet
• On screen statistics
• Number of readings; η, Mean (average); x, Standard deviation; σ,Highest reading; hi, Lowest reading; lo, Coefficient of variation; COV
• High & low limits; definable audible & visual alarms
• Number above high limit; Number below low limit; lo
• software & USB cable
• Alarm; daily (d), interval (i)
• Date and time stamp for each reading
• Replaceable screen protectors
• Protective case
• Plastic transit case
• Measurement range : 0-500μm (20 mils)
• On-screen calibration instructions; in 30+ languages
• Number of batches : Last 5 / 2,500 Gauge memory; number of readings 150,000
• Calibration lock
• Delete last reading
• Limits; user definable audible & visual pass/fail warnings
• Gauge (g) or gauge & batch specific (gb) limits (gb)
• Batch types; normal, counted average
• Review, clear & delete batches
• Copy batches and calibration settings
• Alpha-numeric batch names; user definable on the gauge
• Fixed batch size mode; with batch linking
• Trend Graph; last 20 readings
• Review batch graph

A well-integrated service support is provided from service centre with team of customer support group headed by a Service Manager, who double up for technical & application support to our customers.

Additional Information:

• Packaging Details: Elcometer 224 gauge, glass zero tile, 2 x calibration foils¿¿¿, wrist harness, plastic transit case (T), protective case, screen protector, probe protection cap¿¿¿, 2 x AA batteries, test certificate, operating instructions, USB cable (T) & ElcoMaster¿¿ software (T)

Product Details:

We are engaged in providing the broad assortment of surface profile gauges.

The Elcometer 224 Digital Surface Profile provides the very latest in surface profile measuring technology. Accurate, fast and very user friendly, this gauge is available with Bluetooth® and with or without memory. The Elcometer 224 Top model is available with wireless technology and can store up to 150,000 readings in 2,500 batches.
The Elcometer 224 Digital Surface Profile is available in two different models: Model B and Model T. Each gauge provides the user with increasing functionality – from the entry level Elcometer 224 Model B, to the top of the range Elcometer 224 Model T, with memory, alpha-numeric batching and Bluetooth® communication.Elcometer 224 Digital Surface Profile Integral Probe ModelsIntegral gauges are ideal for single handed operation as the wide footprint of the internal probe provides greater stability during measurement – allowing for consistent, repeatable and accurate results.

 

Elcometer 224 Digital Surface Profile Separate Probe Models

Standard and armoured probes are available for the separate models, providing even greater measurement flexibility. Elcometer surface profile probes are supplied with a glass zero plate, calibration test foils (nominal values 125µm & 508µm and an Elcometer Test Certificate.

NB. The 224 now has a separate gauge probe that can be used for measurements on pipes and other convex surfaces.

Designed with you in mind

User Friendly

• Large buttons ideal for gloved hands
• Easy to use menus in multiple languages
• High contrast colour LCD with auto rotate
• High and low reading limit indicators
• Factory calibrated for immediate use

Accurate

• Measurement capability to ±5%
• Conforms to National & International Standards
• Temperature stable measurements
• Statistics are calculated and displayed in real time.
• Live and batch readings graph format for instant analysis

Reliability

• Repeatable and reproducible
• 2 year gauge warranty
• Supplied with fully traceable Test Certificates
• Batch & individual reading date and time stamp facility

• • Fast reading rate of 60+ per minute
  • Integral and separate probe options to suit your application
  • Alpha numeric batch identification
  • Compatible with ElcoMaster™ 2.0 and ElcoMaster™ for Android™.
  • Powersave mode with tap awake
  • Tough tungsten carbide user replaceable tip – can be used for up to 20,000 readings
  • USB and Bluetooth® data output
  • Stores up to 150,000 readings in 2,500 batches
  • Measures profiles up to 500μm
  • ASTM D 4417-B
  • SANS 5772
  • US Navy NSI 009-32
  • US Navy PPI 63101-000

Efficient

Powerful

The new ElcoMaster™ 2.0 is a fast, easy to use software solution for all your reporting requirements.

 

Additional Information:

• Packaging Details: Elcometer 224 gauge, glass zero tile, 2 x calibration foils¿¿¿, wrist harness, plastic transit case (T), protective case, screen protector, probe protection cap¿¿¿, 2 x AA batteries, test certificate, operating instructions, USB cable (T) & ElcoMaster¿¿ software (T)

Product Details:

Surface roughness comparison standard for blasted surfaces
consisting of 6 examples of grit-blasting and 6 examples of
shot-blasting. The method complies with the norms : NF and ISO

Business:
Coating industry, galvanizing, laboratories, painting, shipbuilding
industry, metal protection

Standards :
NF/E05-051, ISO 2632 / I 1975 and ISO 2632 / II 1977.
Look up the appropriate standard for a correct execution of the test.

Features :
* High quality metal reference plate.
* Sturdy leather pouch to protect the standard when not in use
* With Grit and Shot-range scales in N6 – N11.

Scope of supply :
The surface roughness comparison standard comes with table,
manual and leather pouch.

Specification :
Material : High-nickel test plate
Width : 90mm
Length : 118mm

 

Use :
By positioning the comparing standard onto the test surface a comparison to the reference examples of the
comparison standard is made.
Assess the profile of the comparison standard most closely to match that of the test area and determine the
result to the class : A for Shot and B for Grit.
The fineness of the abrasive medium is further divided into : a for coarse grain or b for fine grain.

Product Details:

We are engaged in providing the broad assortment of “Coating Inspection & Measurement instruments”.

Needle Pressure Gauge / Hypodermic Needle Pressure Gauge is designed to measure air pressure in blast and air hoses. Pressure drop is responsible for decreased production rates, increased abrasive consumption and reduced anchor profile in abrasive blasting systems, where it really counts.

This tool verifies the nozzle pressure which is critical to blasting performance. The nozzle pressure should be checked every day.

 

 

 

Features :

• Range 0 to 160 psi

• Extruded aluminum case for superior durability

• Easy to read display

Scope of Supply:

• Elcometer 102 Needle Pressure Gauge

• Pressure gauge guard

• Spare hypodermic needle

• Vinyl pouch

• Operating instructions

Additional Information:

• Packaging Details: Elcometer 102 Needle Pressure Gauge, pressure gauge guard, spare hypodermic needle, protective pouch and operating instructions

Product Details:

We are engaged in providing the broad assortment of "Surface Riughness Tester".

7061 MarSurf PS1 Surface Roughness Tester' that is light weight and portable measuring solution for the range of surface roughness measurements required for compliance to International Standards. Not only it measures the peak-to-valley height but also gives you the frequency of peaks encountered on a sample area. A wide range of stylus pick-ups and accessories are also available from Elcometer to suit all your inspection needs.

Surface roughness testers consist of a stylus which is mechanically drawn across the surface recording an 'image' of the surface roughness across a pre-defined sample length. The measurement technique provides a number of measurement parameters including:

 

Rmax: The greatest distance between the highest peak and lowest valley over the sampling length.

Ra: The average surface roughness over the sampling length.

Rt: The distance between the highest peak and the lowest valley within any given sampling length.

Rz: The average distance between the highest peak and the lowest valley over a number of sampling lengths.

Specification :

Unit of Measurement : Metric, inch

Measuring Principle : Stylus Method

Stylus Pick-Up Supplied(Other stylus pick-ups are available) : Inductive skidded stylus pick-up, 2µm (80µin) stylus tip, measuring force approx. 0.7 mN

Parameters : 24 (with tolerance limits): Ra, Rq, Rz equiv. to Ry (JIS), Rz (JIS), Rmax, Rp, Rp (ASME), Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr equiv. to Tp (JIS, ASME), RSm, R, Ar, Rx

Measuring range : 350µm, 180µm, 90µm (changes automatically)

Profile resolution : 32nm, 16nm, 8nm (changes automatically)

Filter : Phase-correct profile filter (Gaussian filter) according to DIN EN ISO 11562, special filter according to DIN EN ISO 13565-1, ls filter according to DIN EN ISO 3274 (can be disabled)

Cutoff : 0.25mm, 0.8mm, 2.5mm; automatic (0.010”, 0.030”, 0.100”)

Traversing length : 1.75mm, 5.6mm, 17.5mm; automatic (0.069”, 0.22”, 0.69”)

Traversing length (acc. to MOTIF) : 1mm, 2mm, 4mm, 8mm, 12mm, 16mm (0.040”, 0.080”, 0.160”, 0.320”, 0.480”, 0.640”)

Short cutoff : Selectable

Evaluation length : 1.25mm, 4.0mm, 12.50mm (0.050”, 0.15”, 0.50”)

Number n of sampling lengths : Selectable: 1 to 5

Calibration function : Dynamic

Memory capacity : Max. 15 profiles, max. 20,000 results

Other functions : Blocking of settings (code-protected), date/time

Battery : Li-ion battery

Interfaces : USB, Mar Connect (RS232)

Dimensions : 140mm × 50mm × 70mm (5.51” × 1.97” × 2.76”)

Can be used in accordance with:
ASTM D7127, ASME B46, DIN 4768, EN 10049, ISO 4287, ISO 4287/1, JIS B 0601

Additional Information:

• Item Code: Elcometer-7061-MarSurfPS1
• Packaging Details: lcometer 7061 MarSurf PS1 base unit, drive unit, 1 x standard stylus pick-up, built-in battery, roughness standard integrated into casing, height adjustment accessory, stylus pick-up protection, universal charger / mains adapter, USB cable, carry case with shoulder strap and belt loop, calibration certificate and operating instructions

Product Details:

We are engaged in providing the broad assortment of “Coating Inspection & Measurement instruments”.

Elcometer are world leaders in the design, manufacture and supply of inspection equipment for coatings, NDT testing and concrete. Our products cover all aspects of coating inspection, from development, through application to post application inspection.

The Elcometer 103 Blast Nozzle Gauge measures the orifice size of an abrasive blasting nozzle. This gauge is used to determine the nozzle orifice wear which leads to low nozzle pressure and decreased efficiency in the performance of the nozzle's venturi. Nozzle orifice wear results in decreased productivity and increased abrasive media consumption.

Additional Information:

• Packaging Details: Elcometer 103 Blast Nozzle Gauge, wax/grease pencil (inside gauge), protective pouch and operating instructions

Product Details:

we are engaged in providing the broad assortment of "Surface Profile" products.

The Elcometer 147 Weld Gauge measures many aspects of welds both in metric and imperial units.

• Angle of Preparation Scale : 0 - 60º in 5º divisions

• Misalignment Scale : 0 - 25mm in 1mm divisions and 0 – 1” in 1/16” divisions

• Fillet Leg & Excess Weld Scale : 0 - 25mm in 1mm divisions and 0 – 1” in 1/16” divisions

• Fillet Throat Scale : 0 - 20mm in 1mm divisions and 0 – 3/4” in 1/16” divisions

• Undercut Scale : 0 - 4mm in 1mm divisions and 0 – 1/4” in 1/16” divisions

• Depth of pitting

• General linear measurements up to 60mm (2”)

• 2mm (0.79”) edge roundness test

Additional Information:

• Packaging Details: Elcometer 147 Weld Gauge and instruction card

Product Details:

Rubert & Rugotest Surface ComparatorSurface Comparators are available in two models:

• Rubert - available in grit and shot versions
• Rugotest - shot and grit profiles on the same block

Roughness is displayed in both "classes" and "roughness averages" for easier identification. Available in Metric only.

6 Roughness Values per Comparator.


Rugotest Shot & Grit Surface Comparator : N6, N7, N8, N9, N10 and N11 equivalent to 0.8, 1.6, 3.2, 6.3, 12.5, and 25µm roughness averages respectively

Additional Information:

• Item Code: Apan-Elcometer-127
• Packaging Details: Elcometer 127 Sand Surface Comparator Elcometer 127 Grit Surface Comparator Elcometer 127 Shot Surface Comparator

Product Details:

Pipe Pit Gauge is a pocket sized gauge designed to identify the condition of a pipe.The gauge is placed horizontally on the surface of the pipe and the stylus is positioned into the base of the corrosion pit. The gauge shows the pit depth compared to the nominal pipe wall thickness.

Range0 - 500mils (0 - 0.5”)Graduation10mils and 1/16”Dimensions68 x 133 x 4mm (21 x 5.25 x 0.18”)

Additional Information:

• Packaging Details: Pipe Pit Gage,Packing puch

Product Details:

We are engaged in providing the broad assortment of "Surface Profile" products.

We offers a range of inspection and visual comparison manuals specifically for the coatings inspector. Surface Weld Comparator provides for the first time, a means of comparing the quality of welds.
It includes generic and graphic descriptions of various degrees of surface finishing of welds that may be specified in preparation for the lining of tanks and vessels.

Each Weld Comparator is supplied complete with a copy of the NACE SP0178-2007 Standard, providing detailed recommendations on design, fabrication and surface finish requirements. It includes generic and graphic descriptions of various degrees of surface finishing of welds that may be specified in preparation for the lining of tanks and vessels.


Can be used in accordance with:
SP0178-2007 (formerly RP0178)