Optical Instruments

Product Details:

Portable chroma meter can measure the color temperature, illuminance, chromaticity, excitation purity, luminous flux, RGB and dominant wavelength of various light sources.

Determining the accuracy of an LE illumination, color temperature measurements are particularly important. This instrument utilizes sensors that closely parallel the color-matching functions specified by the International Commission on Illumination (CIE). Depending on the application Chroma Meter used, results can be displayed through different color notations.

Chroma Meter is design to be a highly effective tool for measuring the color temperature of white LEDs, a task that has been very difficult in the past. it is able to do this due to its ability to measure the chromaticity from the phosphor and also inspect light quality output of the final assembled white LED.

Relative Spectral Response : Closely matches CIE Standard Observer curves X(λ) , y(λ) , and Z(λ) Within 6%(f1') of the CIE spectral luminous efficiency V(λ)

Measuring function : Tristimulus values: X Y Z, Chromaticity : Ev xy, Ev u'v'
, Correlated color temperature: Tc , Color difference: XYZ), Evxy), Evuv), EvTcuv, Chromaticity coordinate: ICE1931(x,y),ICE1976(u,v), Dominant wavelength: λd, Colour purity: Pe , Luminous flux: Φ , RGB parameter, chromaticity diagram, maximum recording and indicator.

Technique parameter:Features
* Portable, lightweight, compact and handheld
* Detachable receptor head
* Simultaneous measurements
* Ideal for white LEDs
* Can be used to measure any light sources
* LED ranking function
* Calibration function
* Easy data transfer
* Optional PC controllability

Product Details:

we are engaged in providing the broad assortment of “Gloss Meter" . Visual appearance can determine a person’s perception of a product. Colour and Gloss are two key parameters that are used to define a product’s overall quality. The ability of a surface to reflect light without scattering is known as gloss. Gloss is measured by directing a constant intensity light beam at a fixed angle to the test surface and then by monitoring the amount of reflected light at the same angle. Different surfaces require different reflective angles. Glossmeters cover the range necessary to measure almost any surface from high gloss to matt, from large to small surfaces, flat or curved.

Glossmeter range are design by today's most advance technology & need of the hour , easy to use, high accuracy, repeatability and reproducibility with functionality making them the most advanced glossmeters on the market today.
Model selection :

Model B 60° Glossmeter : a simple 60° glossmeter.

Model T 60° Glossmeter : State of the art Single variant with %Reflectance and Haze.

Model T 20/60° Glossmeter : State of the art dual variant with %Reflectance and Haze.

Model T 20/60/85° Glossmeter : State of the art triple variant with %Reflectance and Haze.


Specification :

Display information : 2.4' (6cm) QVGA colour TFT display, 320 x 240 pixels

Power : USB (via PC) or 2 x AA batteries (~50,000 readings)

Measurement Dimensions : 20°: 10 x 10mm; 60°: 8 x 16mm; 85°: 4 x 55mm

Measurement Range :

20°: 0 - 2,000GU;

60°: 0 - 1,000GU;

85°:0 - 160GU

Repeatability ± 0.1GU (0 - 10GU); ±0.2GU (10 - 100GU); ±0.2%: 100 - 2000GU

Reproducibility ± 0.2GU (0 - 10GU); ±0.5GU (10 - 100GU); ±0.5% 100 - 2000GU Resolution

Gloss: 0.1 GU (0 - 100GU); 1 GU (>100GU)

% Reflectance: 0.01% (0 - 10GU); 0.1% (10 - 100GU)

Haze: 0.1 HU (0 - 100HU); 1 HU (>100HU)

Operating Temperature : -10°C to 50°C (14 to 122°F); Relative Humidity: 0 - 85%RH

Dimensions (H x W x D) : 68 x 155 x 50mm (2.68 x 6.10 x 1.97)

Weight :534g

Can be used in accordance with:

AS/NZS 1580.602.2, ASTM C584, ASTM C523, ASTM D523, ASTM D1455, ASTM D2457, ASTM D4039, ASTM D4449, ASTM D5767, ASTM E430, ASTM E2387, BS 3900 D5, DIN 67530, ECCA T2, EN 12373-11, EN 13523-2, ISO 7668, ISO 2813, ISO 13803, ISO 17025, JIS K 5600-4-7, JIS Z 8741, TAPPI T 653 (20°)

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

 

Additional Information:

• Packaging Details: Elcometer 480 Glossmeter, integrated calibration tile, calibration certificates for gauge & calibration tile, 2 x AA batteries, wrist strap, operating instructions, plastic carry case, ElcoMaster¿¿ software (Model T) and USB cable (Model T)

Product Details:

As an authorized dealer we are offering wide gamut of optical instrument for colour appearance test and measurement applications.

Grating spectrophotometer adopts bluetooth and USB dual modes for wider use, and with SCI & SCE measurement data, it is compatible with many famous brands. 8mm, 4mm or customized aperture is optional. special UV light makes YS3060 easy to measure sample with UV and high accuracy and extended function PC software let it be good partner for colorist and color quality control management.

Option 01 : UV Grating SpectrophotometerFull Illuminants + UV, 8mm&4mm Apertures, SCI&SCE, Bluetooth Comm, High Precision.
Option 02 : Grating SpectrophotometerMulti-illuminants, Customizable Aperture, SCI&SCE, Bluetooth Comm, High Precision.
Option 03 : Grating Spectrophotometer4 Illuminants, 8mm Aperture, SCI&SCE, Good Precision.

Comply with CIE No.15???GB/T 3978,GB 2893,GB/T 18833,ISO7724/1,ASTM E1164,DIN5033 Teil7, YS3060 grating spectrophotometer features UV, SCI/SCE, USB / bluetooth, 8mm / 4mm switch aperture, etc. It has high accuracy 0.03 based on white calibration plate measured 30 times at 5 seconds intervals after white calibration was performed.

YS3060 UV Grating Spectrophotometer

Full Illuminants + UV, 8mm&4mm Apertures, SCI&SCE, Bluetooth Comm, High Precision.

 

YS3020 Grating Spectrophotometer

Multi-illuminants, Customizable Aperture, SCI&SCE, Bluetooth Comm, High Precision.

 

YS3010 Grating Spectrophotometer

 

4 Illuminants, 8mm Aperture, SCI&SCE, Good Precision.

Features

• Perfect combination of beautiful appearance and the human body mechanics structural design

• D/8 geometrical optics, conforms with CIE No.15,GB/T 3978,GB2893, GB/T 18833, ISO7724/1, ASTM E1164, DIN5033 Teil

 

• Use long life and low power consumption combined LED light source, including UV/excluding UV.

 

• Switchable Φ8/4mm aperture, adapt to more samples; support both SCI and SCE at the same time.

 

• Measure sample spectra, accurate Lab data , can be used in color matching and accurate color transmission.

 

• High electronic hardware configuration: 3.5-inch TFT color LCD,Capacitive Touch Screen, concave grating, 256 image Element Double Arrays CMOS Image Sensor.

 

• USB/Bluetooth 2.1, dual mode, widely useful.

 

• Super stain-resistant and stable standard white calibration plate.

 

• Large capacity storage space, over 20,000 measurement data.

 

• Two standard observer angles, a variety of illuminant, a variety of color indexes, conforms with a variety of standard colorimetric data, meet a variety of customers' demand for color measurement.

 

• Camera Locating Function, better position.

 

 

• PC software has a powerful function extension.

Grating spectrophotometer can easily achieve color transferring , and be used as a precision instrument for color matching system. It's widely used in plastics, electronics, painting, ink, textile and garment, printing and dyeing, printing paper, automotive, medical, cosmetics and food industries, scientific research institutes, schools and laboratories.

Optical System-Wavelength Range  400-700 nM
models also available-YS3020, YS3010

Additional Information:

• Packaging Details: Grating Spectrophotometer, Power Adapter, Built-In Li-ion Battery, User Guide, PC Software, White and Black Calibration Cavity, Dust Cover, Micro Printer, Powder Test Box

Product Details:

As a Authorized dealer we are engaged in providing the broad assortment of wide gamut of optical instruments for Optical instruments.
NR200 precision colorimeter features with 8/d structure that is very precise. 8mm measurement aperture makes it popular in many applications, such as fabrics, paper, plastic parts, building materials. CSCQ3 software helps perform color difference analysis, color difference cumulative analysis, chromaticity index, color sample database management, simulating object color, etc.



Applications:colorimeter is widely used in plastic, electronic, paint, ink, textile, garment, printing and dyeing, food, medical, cosmetic industries, scientific research institutes, schools and laboratories. It not only can help to perform color matching and color management studies, but also can control product quality management. 3nh colorimeter is equipped with high-end color management software that can connect to PC to achieve more extension functions.

Product Details:

Ts7x series is a grating spectrophotometer that 3nh company has spent 3 years to design and is developed by 3nh independent intellectual property rights. The instrument adopts 1000 line precision blazed grating as the spectroscopic element, the silicon photocell array with large photosensitive area as the detector, the full spectrum led with high life as the light source, and the optical resolution is less than 10nm in the visible light range.
Under the condition of d/8 geometric optical illumination recommended by CIE, TS7700 grating spectrophotometer can accurately measure the SCI and SCE reflectance data of samples / fluorescent samples, and also can accurately measure and express various color difference formulas and color indexes in various color spaces. With spectrophotometer TS7700, it can easily realize the accurate transmission of color and can also be used as the detection equipment of accurate color matching system.
Spectrophotometer TS7700 is also widely used in the color quality control of various products. TS7700 is equipped with high-end color management software, which is connected to the computer to realize more function expansion. The instrument has stable performance, accurate color measurement and powerful function. It is widely used in plastic electronics, paint and coating, textile printing and dyeing, printing paper, automobile, medical treatment, cosmetics and food industries, as well as scientific research institutions and laboratories etc.

Features:

§  D / 8 geometric optical structure, conforming to CIE No.15, GB / T 3978, GB 2893, GB / T 18833, iso7724 / 1, ASTM e1164, din5033 teil7;

§  Adopt combined LED light source with high life and low power consumption, including UV / excluding UV;

§  Switch 8mm & 4mm aperture( the flat/ tip measuring aperture can be switched easily, which is suitable for more tested sample)

§  Dual optical path system, the optical resolution in the visible range is less than 10nm, which can measure the SCI and SCE spectrum of the sample at the same time;

§  Accurate spectrum and lab data, used for color matching and accurate color transmission;

§  High hardware configuration: 3.5-inch TFT true color screen, capacitive touch screen, 1000 line blazed grating, silicon photocell array detector with large photosensitive area, etc;

§  USB / Bluetooth dual communication mode, wider adaptability;

§  Super dirt resistant and stable standard white calibration board;

§  Large capacity storage space, which can store more than 30000 pieces of test data

§  10.2/10 standard observer's angle, multiple light source modes, multiple surface color systems, meet various standards of chromaticity indicators, and the needs of various customers for color measurement; 

§  Camera locating position and Stabilizer cross measurement position;

§  PC software has powerful function expansion;

Additional Information:

• Packaging Details: Grating Spectrophotometer, Power Adapter, User Guide, PC Software (Download from office website), USB cable, White and Black Calibration Cavity, Protective Cover, Wrist strap, 8mm flat aperture, 8mm tip aperture, 4mm flat aperture, 4mm tip aperture, Micro Printer, Powder Test Box.

Product Details:

New model YD5050 Plus Grating Spectrophotometer Densitometer with 45/0(45 ring-shaped illumination, 0 degree viewing angle), comply to standard  ISO 5-4,CIE No.15. It is suitable for using in ink printing, in Film Processing, Textile Printing and Dyeing, Plastic Electronics and Other Industries for Color Measurement and Quality Control;especially suitable for the measurement and quality control of optical density and dot enlargement in ink printing.

Under the 45/0 geometric optical illumination and the testing conditions of M O, M 1，M 2 , M 3 stipulated by ISO 13655 standard, the instrument can accurately measure the reflectance data of samples. Under multiple color spaces, it can accurately measure various printing density indexes, color difference formulas and color indexes, and can meet the user's regular testing of various parameters.
 

Product Features

1. 45/0 geometrical optics structure, comply with CIE, the testing conditions of M O, M 1，M 2 , M 3 stipulated by ISO 13655 standard, it can accurately measure various printing density , overprint rate and other printing parameters.

2. Accurately measure reflectance spectrum, CMYK density and Lab value of the sample;

3. High-configuration electronic hardware: 3.5-inch TFT true-color screen, capacitive touch screen, concave grating, 256-pixel dual-array CMOS image sensor, etc.；

4. Perfect combination of the beautiful appearance and the ergonomic structure design;

5. Optional apertures: Φ2/4/8mm, adapt to more samples;

6. Large-capacity storage space, over 20,000 test data

7. Combined LED light sources with long life and low power consumption, including UV light;

8.  USB/Blue2.1 dual communication mode is widely useful;

9. Especially suitable for process control and quality control of printing plants;

 

10. PC software has powerful function expansion.

Measurement Geometry : 45/0(45 ring-shaped illumination, 0 degree viewing angle); ISO 5-4,CIE No.15

 

Features : high accuracy spectrophotometer densitometer, apply in ink printing, in Film Processing, Textile Printing and Dyeing, Plastic Electronics and Other Industries for Color Measurement and Quality Control;especially suitable for the measurement and quality control of optical density and dot enlargement in ink printing;able to customize single aperture Φ2mm,Φ4mm,Φ8mm.

 

Detector : 256 Image Element Double Array CMOS Image Sensor

 

Wavelength Range 400~700nm

 

Measurement Conditions :Compliance with ISO 13655 measurement conditions; M0 (CIE Light Soure A), M1 (CIE Light Soure D50), M2 (Excluding UV light source), M3 (M2+Polarized light filter)

 

Density Standards ISO Status A, E, I, T

 

Density index Density value, density difference, dot area, dot enlargement, overprint, printing characteristics, printing contrast, tone error and gray scale, density scanning

 

Color Spaces CIE LAB, XYZ, Yxy, LCh, CIE LUV, HunterLAB

 

Color Difference Formula : ΔE*ab, ΔE*94, ΔE*00, ΔE*uv, ΔE*cmc(2:1), ΔE*cmc(1:1), ΔE(Hunter)

 

Other Colorimetric Index : WI(ASTM E313, CIE/ISO,AATCC,Hunter),  YI(ASTM D1925,ASTM 313),

MI (Metamerism Index), Opacity, 

 

Chromaticity value: within ΔE*ab 0.03 ( When a white calibration plate is measured 30 times at 5 

second intervals after white calibration)  Except M3

 

Product Details:

As a Authorized dealer we are engaged in providing the broad assortment of wide gamut of optical instruments for Optical instruments.

spectrophotometer is widely used in plastic, electronic, painting, coating, ink, textile, garment, printing and dyeing, food, medical, cosmetic, industries, scientific research institutes, schools and laboratories.  It can measure reflectance spectrum and other color index precisely. Spectrophotometer not only can help to perform color matching and color management studies, but also can control product quality management accurately. The instrument is equipped with high-end color management software which can connect PC to achieve more extension functions.

Observation system : d/8 (diffused illumination, 8-degree viewing angle) Conforms to CIE No.15, GB/T 3978.
Integrating sphere Size : Φ58mm
Light Source : Combined LED sources
Sensor : Silicon photodiode array
Wavelength range : 400~700nm
Wavelength pitch : 10nm
Reflectance range : 0~200%
Measuring Aperture : Φ8mm
Color Space : CIE LAB, XYZ, Yxy, LCh, CIE LUV???LAB&WI&YI
Color difference Formula : ΔE*ab,ΔE*uv,ΔE*94,ΔE*cmc(2:1),ΔE*cmc(1:1),ΔE*cmc(l:c),CIE2000ΔE*00???ΔE(h)
Other Chromaticity Data : WI(ASTM E313???CIE/ISO,AATCC, Hunter)???YI(ASTM D1925???ASTM 313), TI(ASTM E313???CIE/ISO), Metamerism Index (Mt), Strength Color Stain, Color Fastness
Observer : 2°/10° 
Illuminant : D65???A, C, D50???D55???D75???F1???F2(CWF)???F3???F4???F5???F6???F7(DLF)???F8???F9???F10(TPL5)F11(TL84), F12(TL83/U30)
Display Data : Spectral Value/Graph, Colorimetric Value, Color Difference Value/Graph, PASS/FAIL Result, Color Offset, Color Simulation, color index setting(ΔE*94, ΔE*cmc, ΔE2000), tolerance prompt, reverse prompt, time setting, language setting, restore factory setting 
Measurement Time : 1.2s
Repeatability : 
  Spectral Reflectance: standard deviation within 0.1%(400~700nm: within 0.2%) 
   Colorimetric Value: Standard deviation within DeltaE*ab 0.04 (Measurement conditions: white calibration plate measured 30 times at 5 seconds intervals after white calibration was performed.)
Inter Instrument Agreement : Within DeltaE*ab 0.2 (Average for 12 BCRA Series II color tiles)
Dimension : L*W*H=90*77*230mm
Weight : 600g
Battery : Li-ion battery. 2800 times within 8 hours.
Lamp Life : 5 years, more than 1.6 million measurements
Display Screen : TFT 3.5inch, Capacitive Touch Screen
Interface : USB/RS-232
Data Memory : 1000 Standards, 15000 Samples 
Operating Temperature : 0~40??????32~104°F???
Storage temperature :  -20~50??????-4~122°F???
Standard Accessory : Power Adapter, Li-ion Battery, Operating Instruction, CD-ROM (containing management software), Data Line, White and Black Calibration Cavity, Protective Cover and Wrist Strap
Optional Accessory : Micro Printer, Powder Test Box

Additional Information:

• Packaging Details: Power Adapter, Li-ion Battery, Operating Instruction, CD-ROM (containing management software), Data Line, White and Black Calibration Cavity, Protective Cover and Wrist Strap, Micro Printer, Powder Test Box

Product Details:

Chromatic Meter is a precision colorimeter and widely used in plastic, electronic, paint, ink, textile, garment, printing and dyeing, food, medical, cosmetic, industries, scientific research institutes, schools and R&D laboratories. It can precisely measure kinds of color indexes in various color spaces and easy to use with powerful functions. The instrument is equipped with high-end color management software which can connect to PC to achievemore extension functions.

Features:
1. Switchable 8mm and 4mm measuring apertures, easy to measure concave surface.

2. Higher measurement stability and accuracy, Delta E ab<0.03.

3. More color spaces, various color indexes, extensive applicability.

4. Double locating: illuminating locating and cross locating

5. Configured with high-capacity rechargeable Li-ion battery

6. Built-in white plate parameters and physical white calibration board, easy to operate;

7. New integrating sphere optical path design, more stable measurement;

8. Measurement data can pass national metrology authentication.

Product Details:

we are engaged in providing the broad assortment of wide gamut of optical instruments for Optical Instruments. 6075/1 SP60 is a portable sphere spectrophotometer, designed to give fast, precise and accurate colour measurement information on materials ranging from paper and paint to plastics and textiles.

• Lightweight, compact, portable instrument
• Diffuse/8° sphere optical geometry
• Fixed 8mm aperture
• Large, easy-to-read graphical LCD display
• Opacity and colour strength measurement
• Simultaneous measurement of both specular component included and specular component excluded
• Rugged construction
• Rechargeable battery for remote use

Key Features

Measuring Functions and Indices
The Elcometer SP60 Portable Spectrophotometer provides absolute and difference measurements for the following colourmetric systems. These values can be obtained from any of the nine illuminants with 2° or 10° observer angle: L*a*b*, DL*Da*Db*, L *C*h°, DL*DC*DH*, DE*ab, DECMC, DE CIE94 and XYZ. Whiteness and Yellowness per ASTM E 313-98.

Pass/Fail Mode
The portable spectrophotometer instrument stores up to 1024 standards with tolerances for easy pass/fail measurement. A red/green LED indicator and the LCD display provide visual confirmation of results. A tone also sounds to indicate a fail result and measurement completion.

Quick Colour Compare
A quick measurement can be taken to compare two colours. This allows the operator to take quality control readings in a time efficient manner without having to create tolerances or store data.

The Sphere
SP60’s diffusing sphere is made of Spectalon^®, a durable, highly reflective material designed to perform in a rigorous production environment. The diffusing material prevents degradation due to the flaking and chipping of the sphere wall material.

Opacity, Colour Strength and Shade Sorting
The portable spectrophotometer instrument can measure opacity as well as three colour-strength options: chromatic, apparent and tri-stimulus calculations. The Elcometer SP60 Portable Sphere Spectrophotometer also performs 555 shade sorting. This is an important consideration in the colour quality control of manufactured products involving plastics, painted or textile materials.

Texture and Gloss influence
To determine the influence of the specular component, the SP60 Portable Sphere Spectrophotometer allows simultaneous measurement of both specular - included (colour) and specular-excluded (appearance).

 

Additional Information:

• Packaging Details: Elcometer 6075/1, calibration standards, AC adaptor, carry case & operating instructions

Product Details:

We are engaged in providing the broad assortment of “Optical Instruments".

It provides the very latest in gloss measurement technology, providing accurate gloss, haze and distinctiveness of image (DOI) analysis in a single reading.

Key features:

Accurate

• Fast and simultaneous measurement of gloss, haze, DOI, Rspec, RIQ and Goniophotometric profiles
• Each instrument is supplied with a Calibration Certificate

Simple

• Bright, easy to read LCD screen displays the gloss value, statistics & graphs
• Display measurements are user definable
• Each set of readings is time & date stamped

Flexible

• Triple (20/60/85°) angle for maximum accuracy and resolution in all gloss applications
• Bluetooth^® or USB download to ElcoMaster^® data management software for instant analysis

Durable

• Robust aluminium construction ensures optical stability
• 17hrs+ continuous operation or 20,000+ readings
• Compact & portable instrument with integrated tile holder

Efficient

• Easy menu-driven user interface in multiple languages
• Clear, illuminated display showing up to five parameters on screen
• On board trend analysis with gloss and image quality (IQ) values

Powerful

• On board memory for 999 readings with full goniophotometric profiles
• Internal battery is fully rechargeable in 2.5 hours

Measurement Range

Gloss

20°: 0-2,000GU;
60°: 0-1,000GU;
85°: 0-150GU

Haze

0-2,000GU

DOI

0-100 DOI

RIQ

0-100 RIQ

Additional Information:

• Packaging Details: Elcometer 408 Gloss & DOI Meter, high gloss calibration tile with calibration certificate, gloss tile cleaning cloth, transit case, USB cable, Novo-Gloss Multi Gauge Software, mini cd (instruction manual, Bluetooth¿¿ data app, Example Excel spreadsheets), instructional videos & operating instructions

Product Details:

Developed in collaboration with the UK's National Physical Laboratory (NPL), the Novo Curve Gloss Meter small measurement area and unique sample positioning system ensures that components can be accurately positioned, making this glossmeter the ideal unit for taking measurements on small, curved or complex surfaces.

The Novo Curve Gloss Meter 8mm (0.01sq inch) measurement area is approximately 3% of the area usually required by standard glossmeters.

Features:

• Continuous reading mode, allowing rapid assessment of the variation of the surface gloss
• Statistical analysis at the touch of a button
• Internal Memory - up to 199 readings can be stored in the gauge
• USB Data Output to PC - instant reports using Elcometer's Novosoft™ Software
• Auto ranging geometry - readings can be taken over the entire gloss range, from matt to mirror finish
• Remote data capture trigger

Product Details:

we are engaged in providing the broad assortment of wide gamut of optical instruments for Optical Instruments. It is an affordable sphere spectrophotometer, designed to give fast, precise and accurate colour measurement information on materials ranging from paper and paint to plastics and textiles.

• Lightweight, compact, portable instrument

• Diffuse/8° sphere optical geometry

• Fixed 8mm aperture

• Large, easy-to-read high res graphical colour LCD display

• Opacity and colour strength measurement

• Simultaneous measurement of both specular component included and specular component excluded

• Rugged construction

• Reliable detent lock

• Rechargeable battery for remote use

Key Features

Measuring Functions and Indices
6085 provides absolute and difference measurements for the following colourmetric systems. These values can be obtained from any of the nine illuminants with 2° or 10° observer angle: L*a*b*, DL*Da*Db*, L *C*h°, DL*DC*DH*, DE*ab, DECMC, DE CIE94 and XYZ. Whiteness and Yellowness per ASTM E 313-98.

Pass/Fail Mode
The instrument stores up to 1000 standards with tolerances for easy pass/fail measurement. A simplified green tick shown on screen shows a straight forward pass indication or a red cross to show a failed. Results are shown at a glance showing detailed colour comparison data for analyst.

Quick Colour Compare
A quick measurement can be taken to compare two colours. This allows the operator to take quality control readings in a time efficient manner without having to create tolerances or store data.

The Sphere
6085’s diffusing sphere is made of Spectalon®, a durable, highly reflective material designed to perform in a rigorous production environment. The diffusing material prevents degradation due to the flaking and chipping of the sphere wall material.

Opacity, Colour Strength and Shade Sorting
The instrument can measure opacity as well as three colour-strength options: chromatic, apparent and tri-stimulus calculations. The Elcometer 6085 also performs 555 shade sorting. This is an important consideration in the colour quality control of manufactured products involving plastics, painted or textile materials.

Texture and Gloss Influence
To determine the influence of the specular component, the 6085 allows simultaneous measurement of both specular - included (colour) and specular-excluded (appearance).

 

Product Details:

As a Authorized dealer we are engaged in providing the broad assortment of wide gamut of optical instruments.

Measurement of Haze and Transmittance of the parallel plane sample of all transparent and translucent ( e.g. plastic board or sheet). Haze meter is applicable in all transparent and semitransparent parallel level material for testing transmittance and haze degree.

Microcomputer control and easy to operate. Display of transmittance and haze at the same time.

Standards:

ASTM D1003-61 (1997): ”Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics” and JISK7105.

Character:

LED the transmittance and haze degree of transparent at the same time
With USB interface to connect to PC to save data.

Technical parameters:

• Testing range:

Transmittance: 0-100.0%
Haze degree: 0-30.00%
(absolute measurement),
30.1-100%
( relative measurement)

• Accuracy:

Transmittance: ≤1%
Haze degree: when H≤0.5%, 0.1%;
when H0.5%, 0.3%

• Display average value of transmittance and haze degree automatically.
• Take over by integral ball
• C clamp-house
• LED display
• Minimum reading:

Transmittance degree: 0.1%;
Haze degree: 0.01%

• Automatically operation system
• Transmittance degree and haze degree can be switched automatically;
• Calibrate automatically.
• Warming time: 30 minutes
• Sample size:
• Solid standard sample: 50mm×50mm
• Solid full-page proof: width: 380mm, thickness: 130mm
• Flume size: 50mm×50mm×10mm
• Film size: 50mm×5

Product Details:

As an Authorized dealer we are engaged in providing the broad assortment of wide gamut of optical instruments for Optical Instruments.

precision colorimeter features with 8/d structure that is very precise. This cheap colorimeter is spoken highly of by many customers, and the small size 4mm measurement aperture makes it popular used in many applications, such as fabrics, paper, plastic parts, building materials.

Product Advantages :

• Built-in white plate parameters. No need to calibrate each time which realize rapid measurement.

• Double Locating: Illuminating locating and precise cross locating.

• Switchable Double Measurement End Face: Large stable end face and small concave-convex end face.

• New Integrating Sphere Optical Path Design: Eliminating the stray light of main optical path and auxiliary optical path. Possessing the highest measurement stability and precision.

• 4mm Measuring Aperture.

• Equipped with rechargeable high-capacity Li-ion battery. No need to purchase battery repeatedly.

• Connect PC computer to realize more functions.

• Having got SCM Metrological Certification, CE Certification, and ISO9001 Quality Management System Certification.

• Hand-head structure: small and convenient; make the measurement easier.

• Exquisite appearance: adopts traditional and fashionable aesthetic designs.

• Spending huge sums on high-end mold. Product consistency approaches 100%.

• High cost performance: large output, good quality, cheap products.

1. Illuminating Locating
2. Cross Locating
3. Large Stable End Face
4. Small Concave-Convex End Face.

Specifications :

Glossmeter rapid LED technology accurately and repeatably measures up to 3 angles at the same time.

Standard Mode :

1+ reading per second, (70+ readings per minute);

< 0.3 seconds per angle

Auto Repeat Mode :

3 readings per second, (180 readings per minute);

~ 0.1 seconds per angle

Scan Mode :

10 readings per second, (600 readings per minute);

~ 0.03 seconds per angle

Fully customisable, scratch and solvent resistant colour LCD allows the user to display:

• Triple angle readings

• Gloss, % Reflectance or Haze readings

• Readings & user selectable statistics

• Readings and Differential with pass/fail

• Run chart & statistics / Trend Graph

• Readings & differential with analogue scan bar

Product Details:

As a Authorized dealer we are engaged in providing the broad assortment of wide gamut of optical instruments for various applications. The APDM3000 series Densitometer measure the amount of transmitted light for radio graphic testing developed and known for accurate reading, favorable stability and convenient operation are its user friendly features. It can be widely used in various industries, including nondestructive testing (NDT), Printing and Medical treatment.

The inclusive density film with the machine is used for calibration.

Specification

Density Range : D=0.00~4.00 / D=0.00~4.50 / D=0.00~5.00 ( Total 3 Models)

Repeatability : ±0.01 D

Measuring Error :

0.00~3.00 ±0.02
3.00~4.00 ±0.03
4.00~4.50 ±0.05
4.50~5.00 ±0.08

Reading Stability: ±0.02

Measurement Area: 2mm (Diameter of the Aperture Hole)

Sampling time: 0.8s

Displaying Mode: Three digital displaying

Power : 50 - 60Hz, 110V or 220V ±10%

Power Dissipation : 25 W

Aperature Size : Dia. 2mm

Display Mode : Three Digital Display

Communication Port : RS232 Port
Software : DM CAL PC Software

Working : Temperature: 0°C - 40°C, 32°F - 104°F

Environment : Relative humidity = 85%

Dimensions : 9.6" x 10.6" x 4.4" (260mm x 265mm x 110mm) (H x W x L)

Weight : 4.6 lbs. (2.1 kg)

Voltage : 110V / 220V

Includes:

Unique calibration software which allows precise user calibration to a certified step wedge.

Scope Of Supply :

• Densitometer
• Standard Step Density Tablet
• Power Cable
• RS-232 Serial Port Cable
• Software CD for Auto Calibration Quality Certification

Film density is measured with a densitometer which simply measures
the amount of light transmitted through a piece of film using photovoltic sensor

Visual Colorimter is a visual color measurement instrument, which adopts the internationally recognized special color degree measurement of various liquid, colloidal, solid and powder samples.

Visual color matching method for the determination of material color of the instrument, can be used for cooking oil, plastic, textile, food, jam, grain, oil, rosin, spices, such as rubber material color measurement, transmission method is applied to the liquid and transparent colored material measurement, reflection method is applicable to the non transparent surface color measurement.

Characteristics:

Visual measurement of color matching to determine material color. Design in conformity with internationally accepted color scale.Simple structure and easy to operate.


Operational Fetures

The instrument consists of a standard whiteboard, colorimetric boxes, color filter and a tube group consisting of colorimetric box made of a metal casing structure, Its inner surface coated with a uniform white matt paint, left and right there are two zsW milk white bulbs, each of them with a whiteboard ± Gou ° angle, by two Metal plates forming a diffuse light box to ensure that the two field observation have the same lighting conditions. There is a rectangular groove bottom, with Place in length is less than than the 180- cuvette, the rear cover opened two holes with a standard whiteboard, and sometimes mounted below a hole Non-transparent samples to be tested (sample loading jig can be used to buy the factory), compared to the previous color box portion of a filter cartridge.

To move freely in the groove, the groove board has mounted for a viewing tube spiral. Mounted on the rear panel power switch can be controlled simultaneously Two light bulbs.
Observation tube below the optical system and the light reflected ° field of view divided into about two parts, the left part of the display like Color products, the right of the display color temperature correction filters filter blue color of Lufthansa, the spiral tube for correcting the light source.

The field of view of a two-part color visual effect legislation that section to the same or equivalent method is called color matching, Tintometer works ratio Comparing color measurement instrument on the application of this principle. Drug measured object color filters and color filters and color through the optical path, respectivelyAppeared at the eyepiece field of view, the adjustment filter.


Specifications

• Measurement range:

Red R0.1-R79.9
Yellow R0.1-R79.9
Blue R0.1-R49.9
Neutral 0.1- 3.9

• Minimum Reading: 0.1

• Weight (Gross): 13kg

• Overall dimensions: 620mm 440mm 300mm

we are engaged in providing the broad assortment of "RAL Colour Charts". RAL colour 4-digit references have been an accepted format for colour definition for more than 70 years.

RAL Colour Charts are basic collection consists of more than 200 colors available either in the form of fan-deck, booklet or chart in a gloss or semi-matt finish & globally accepted format for colour definition for more than 70 years.

RAL Colour Chart F5
Information card with all RAL CLASSIC Colours

• Complete size 18.7 x 11.69 inches, (8.46 x 11.69 inches)
• Folded, colour samples 0.47 x 0.87 inches
• All colours at a glance
• Gloss finish

Product Details:

As a Authorized dealer we are engaged in providing wide gamut of optical instruments used in various optical applications.

Spectrum transmission meters can be used to measure the transmission of ultraviolet,infrared and visible light,

LS108H spectrum transmission meter is a desktop instrument, which is exclusively designed for optical transmittance test of various materials such as lens, glass, coating material, organic material and paint, etc. The test aperture of the meter is 1mm, which is suitable for the measurement of light transmittance, infrared and ultraviolet transmittance of small size materials. The flat bench-top meter is available for placing various test samples. The test is fast and accurate. Once the test material is placed on the meter, the test results will be displayed immediately. The meter use parallel light path design that can measure thick materials.

Specification :

ø IR peak wavelength : 940nm

ø Visible light : 380nm-760nm 

ø full wavelength,in line with CIE photopic luminosity function

ø Resolution : 0.1%

ø Measurement accuracy : ±2% (colorless uniform transparent material, 0-90% transmittance)

ø Minimum test sample size : 1mm dia.

ø Dimension : 170 mm ×180 mm ×144 mm (L*W*H)

ø Weight about : 1570 g

ø Display : 480px * 272px color LCD

ø Power supply :DC5V/1A

The LS108H optical transmittance tester use ultraviolet light source, infrared light source and visible light source to illuminate the transparent material. The sensor detects the incident light intensity of the three light sources and light intensity after passing through the transparent material under test. The ratio of the over light intensity to the incident light intensity is the transmittance shown in percentage.

Features:

• The instrument adopts parallel optical path design and the measurement results are stable and accurate.

• The instrument has a test aperture of 1mm, which is especially suitable for small-size materials testing.

• Users can select to measure the transmission value or rejection rate.

• The instrument has real-time dynamic self-calibration function,which can be automatically calibrated to 100% transmittance after booting.

• Stainless steel table top design for the convenience of placement and operation.

Product Details:

light transmittance tester is a professional instrument for testing the light transmittance of uniform light-transmitting materials. It uses a parallel light path design and can also be used to detect large thickness materials with an accuracy of ± 1%. Function standard to ensure the passing of testing by the Metrology Institute.

Light transmittance is an important technical indicator of many optical products, such as glass, solar film, laminated glass, PC plastic, etc. The test principle of the light transmittance meter is to use a visible light source to illuminate the measured substance. The sensor detects the incident light intensity of the light source and the light intensity after passing through the measured substance. The ratio of the transmitted light intensity to the incident light intensity is transmitted. Rate, expressed as a percentage.

Application

light transmittance meter can be used to test the light transmittance of glass products, solar films, laminated glass, coating materials, organic material panels and other materials. Suitable for display, production, quality inspection, inspection and other occasions.

 

• The light transmittance meter adopts the parallel light path of the light source and the light collecting design of the receiver, so that it can measure large thickness materials.

• Equipped with a fixed base, with two measurement methods; that is, it is suitable for testing such as on-site measurement of automobile front glass, and it is also suitable for fixed-point light transmission measurement such as a fixed station in a factory.

• Adopt high-resolution acquisition chip, which can realize high-precision data acquisition, fast response and real-time dynamic calibration, high measurement accuracy and fast test speed.

• The instrument can measure high-transmittance samples. The transmittance measurement range is 0.001% -99.8%, and the highest resolution can reach 0.001%.

light transmittance meter conform to the following standard “JJF1225-2009 Calibration Specification for Transmittance Meter of Automobile”.

Additional Information:

• Packaging Details: Light Transmittance Meter, AAA battery, User Manual, Stand, Carrying case.

Product Details:

window film transmission meter is an instrument for measuring the optical properties of uniform and transparent materials such as solar film, glass with film, heat-insulating glass and automobile side windsheild glass. We can select the measurement interface to display the infrared and ultraviolet rejection and transmittance

Window tinting on glass is not just decorative. It serves several functional purposes, including heat reduction, reducing harmful UV rays, enhancing privacy, and preventing upholstery fading. However, there are safety limits on how much tint you can legally apply to your glass windows.

Professionals use the tint darkness scale to measure Visible Light Transmission. The scale expresses Visible Light Transmission as a percentage (VLT%). When VLT% is “adequate”, authorities judge that a road user has a minimum, safe level of visibility outsode glass.

How Do Tint Meters Work?

You place the glass you wish to measure inside of the tint meter. A light of a known frequency (usually ~550nm) then passes through the medium. Depending on the type of tint meter, on the other side of the glass, there will be either a:

1. Sensor to catch the light and calculate the reduction in light strength; or a
2. Reflector to return the light to a sensor located in the main unit. The sensor will calculate the reduction in light strength.

Horseshoe Design Meters are generally the more affordable style of tint meter. To take a measurement, you roll down your window, then place the U-shaped meter over the window’s edge. A limitation of horseshoe style meters is that they cannot measure rear windows or windscreens.

Feature

Easy to operate, fast measurement speed and instant display

The solar film transmission meter has only one button. The three test results will be displayed on the interface immediately after putting the materials into the test slot

 

Parallel light path, side windshield can be tested.

The LS163A Transmission Meter boasts parallel light path design, with a test slot wide 6mm, the instrument can also test large thickness materials such as car side windshield.

Humanized design, Rotating display interface

The display interface can be rotated in 4 directions adaptively, which is convenient for reading data when testing at different angles.

 

Real-time automatic calibration function

The LS163A solar film transmission meter has real time dynamic calibration function , the meter will make self-calibration after powering on.

Three display interfaces available

We can set the display interface as UV and IR rejection rate, light transmission rate or light transmittance.

Lock testing datas by pressing "Hold" button.

The window film transmission meter has data lock function. Press the "Hold" button after testing, the data will remain on the interface after taking away the tested materials.

Low power consumption

It can continuously measure for more than 100 hours.

The transmittance meter will automatically power off if without operation for 3 minutes

 

Specification:

 

UV Peak wavelength : 365nm

IR Peak wavelength : 1400nm

Visible light : 380-760nm, conform to the CIE photopic luminosity function

Accuracy : ±2% (Colorless and transparent material)

Resolution : 0.1%

Test Slot : 6mm *58mm (W*D)

Dimension : 146 mm ×73 mm ×24 mm (L*W*H)

Display : 128*128 Dot matrix LCD

Weight : 187g (Include Batteries)

Power supply : 4*AAA batteries

Product Details:

This meter is used to measure the opacity, or luminous reflectance, of a grey scale. Suitable for the evaluation of a coatings hiding power, or simple shade sorting tasks of metallized films, anodized aluminum or ceramics. It can calculate the contrast ratio (opacity) and store it. The operator can call up the data when required. It complies with ISO 2814, ISO 3906 , ISO 6504, BS 3900 and DIN 55984.

 

• Small and light, easily portable.

• No warm up period.

• Calibrate automatically: judge zero point and calibrate with the white board automatically

• With USB interface and software for transmitting data.

• One 1.5V alkaline Battery can be used for almost 60 hours and 100,000 reading.

• Long-term stable light source needs no replacing.

• With simple test mode and Statistics-Mode.

• Calculates the reflectance value automatically

Main Technical Parameters:

• Working angle: 0°(irradiate) , 45°(receive) ; CIE Illuminant C
• Range of Measurement: 0-100 units
• Resolution: 0.1%
• Accuracy: ±1 unit or 1% (full scale)
• Power Supply: One 1.5V alkaline battery or rechargeable
• Window Size:12x17mm(ellipse)
• Size: 114x32x64mm
• Weight:180g
• Testing Environment: 10???~40???, relative humidity should not be over 85%.

Product Details:

As an authorized dealer we are offering wide gamut of optical instrument for colour appearance test and measurement applications.

Whiteness Meter is mainly used to directly measure the whiteness value of solid object or Powder with flat surface. It can be widely used in whiteness measurement of textile printing and dyeing, paint, chemical building materials, paper board, plastic products, white cement, ceramics, enamel, talc powder, starch, flour, salt, detergent, cosmetics and other substances.

* It consists of Light Source, Optical System, Detection System, Data Process and Display System. The whiteness Calculation Formula of the instrument is blue light whiteness R457.
* Use of high quality imported components, good reliability.
* The optical path design is reasonable, simple. Adopt filter system with correction, the whiteness can be reflected quantitatively.
* No preheating after starting, measurements can be taken after simple calibration, easy to operate.
* Pass strict inspection and testing, the instrument conforms to the JJG 512-2002 Whiteness Meter Verification Regulation. Also conforms to GB3978, GB3979, GB7973, GB7974, ISO2470, GB8904.2, QB1840, GB2913, GB13025.2, GB1543, ISO2471, GB10339, GB5950, GB12911, GB2409 and other standards.
* Able to memory 254 groups of measurement data.
* Use USB data out put and RS- 232 data out put to connect with PC.
* Provide Bluetooth data out put choice.
The light source of the instrument is long-life LED with 457nm, conforming to the light source requirement in the JJG 512-2002 National Metrological Whiteness Meter Verification Regulation. The measurement of the instrument adopts the principle of photoelectric effect. The diffuse reflectance Radiant Brightness Energy Value of the sample surface is receive by the optical cell. Then, the value is amplified by high-precision auto zeroing operation amplifier, inputted to the calibration circuit for energy calibration. Then, the whiteness value of the sample is directly shown on the digital display.

 

Product Details:

This inspection mirror is fitted to a telescopic handle, making it ideal for checking nest boxes, vehicles and hard to reach places well as other spaces with limited access. The mirror is fitted with two super-bright 2 LEDs which provide illumination in poorly-lit spaces.

Brand new and high quality!Dual ball joint positions mirror at any angleChrome plated shaftTwin bright white LEDs illuminate latent areas for ultimate visibilityComfortable handle with soft nonslip rubber gripThe lamp holder can rotate 360 degrees, the pole is telescopic.The mirror measures 4.2 x 6.5cm and is connected to the handle using a ball joint which allows it to be positioned at any angle. The mirror is made from shatter-resistant glass for safety. The rod is made from hard-wearing stainless steelThe handle is covered in a non-slip cushioned grip.
The LEDs require two CR2032 batteries (included) and are operated using a simple on/off switch.

Specification
Mirror size: 4.2 x 6.5cmHandle length: 29 - 87cmPower: 2 x CR2032 batteries 

Product Details:

Whiteness Meter : Measurement of whiteness of blue light of substances such as paper, building materials, starch, flour, sugar and salt.Manual zero adjustment and calibration suitable for small and medium sized enterprises.

Specifications

• Measurement range: 0-120

• Illumination geometric conditions: 45/0

• Peak wavelength: 457nm

• Stability: 0.2

• Repeatability: 0.3

• Accuracy: 1.5%

• Weight (Gross): 9kg

• Overall dimensions: 410mm 240mm 490mm

Product Details:

As a Authorized dealer we are engaged in providing the broad assortment of wide gamut of optical instruments 'Handheld Spectrometer' for various application.

The 1st Handheld Flicker Meter with spectral technology and it is light to carry Measure Flicker at anytime and anywhere.

• Industry-leading launch Flicker measurement instrument.

• Support Flicker Index, Percent Flicker measurement.

• Meets IES / ASSIST / ENERGY STAR / VESA specification definition.

• Standalone operation, no need for smart phone or PC connection.

• Light flicker frequency measurement.

• Spectrum diagram and including five light units-of-measure.

• Flicker time frequency domain real-time monitoring.

• C/P value highest.

Flicker Mode....
Provide Flicker index, Percent Flicker and SVM (Stroboscopic effect Visibility Measure) Applied to Solid-State Lighting, Liquid Crystal Display and photographer.

Light Wave Mode....
It is using spectral spectrometer technologyHelps you measure the cycle time of main light wave

FFT Mode....
A quick computational toolHelp you transfers the signal from time domain to frequency domain.

Product Details:

We are engaged in providing the broad assortment of "RAL Colour Charts". RAL colour 4-digit references have been an accepted format for colour definition for more than 70 years. RAL Colour Charts are basic collection consists of more than 200 colors available either in the form of fan-deck, booklet or chart in a gloss or semi-matt finish & globally accepted format for colour definition for more than 70 years.

Characteristics- 213 RAL Classic colors- size 50 x 150 mm (1,97" x 5,91")- color stripe 20 x 50 mm (0,79" x 1,97")- 5 color swatches per page- gloss finish- simple 4-digit coding system- corresponding color names

Product Details:

As a Authorized dealer we are engaged in providing the broad assortment of Optical Instrument for wide range of Applicatiion. Reflectance meter is designed and manufactured according to international standard ISO2814, ISO 3906 , ISO 6504,BS 3900 and DIN 55984

Feature

 

• Small and light, real easy to be carried and used.

 

• Auto zero calibration.

• One 1.5V alkaline Battery can be used for almost 60 hours and 10000 readings.

• Long-term stable light source needs no replacing.

Specification :

 

• Measure range :0-100%

• Measurement condition : 45°/ 0

• Repeatability : 1.5%

• Power supply : One 1.5V alkaline Battery or rechargeable

 

• Window Size : 12×17mm, (ellipse)

• Dimension : 114mm×32mm×64mm

• Weight : 300g

 

The terms "contrast ratio", "opacity" and "hiding power" are used interchangeably throughout the coatings industry but on this page, in order to simplify matters, only the term opacity will be used. Opacity is defined as the ability of a coating to prevent the transmission of light. A practical example of this is the case where a yellowwall is painted using a red paint. The greater the opacity the red paint, the more efficient it will be at hiding the underlying yellow colour

Opacity is defined by how a wet film of the test coating is applied to a black and white patterned substrate. After the film has dried, a reflectance meter or a spectrophotometer is used to measure the amount of light reflected from the overcoated black areas of the substrate. This is then expressed as a percentage of the amount of light reflected from the overcoated white areas. This value is the opacity of the film.

A paint which is highly opaque will obscure the black and white areas to an equal extent. In this situation, equal amounts of light will be reflected from the overcoated black and white areas and consequently an opacity value of 100% will be obtained.

Color Matching Box is our updated version, and it can accommodate up to 5 light sources. The consistency of the light sources in all Tilo Colour Assessment Cabinets gives excellent viewing conditions for reliable colour critical decisions under consistent lighting.

 

Color Matching Box can be applied to the industries that need to perform color difference testing as follows: as the premiere designer and manufacturer of color matching instrument products for the Graphic arts, Photographic, Textile, Dyeing, Packaging, Printing, Leather, Inks, Knitwear, Plastic, Automotive and Ceramics industries.

 

Color Matching BoxFeatures:

1. Color Matching Box render color more accurately. With 5 different light sources(D65, TL84, CWF, F, UV), which can detect the metamerism.

2. Meets or exceeds major international standards for visual color evaluation including: ASTM D1729, ISO3664, DIN, ANSI and BSI.

3. Easy to operate by using individual switches for each light source.

4. Elapsed time meter for tracking optimal lamp replacement.

5. Automatically alternating among light sources.

6. No warm-up time or flickering which insures quick and reliable color judgment.

7. Economic power consumption and low heat generation for high light efficiency.

8. The dimension can be made by customized.

About Light Sources:

Remarks: Optional tubes D50, D75, TL83, U30, U35, A

 

we are engaged in providing the broad assortment of "RAL Colour Charts".
RAL colour 4-digit references have been an accepted format for colour definition for more than 70 years. RAL Colour Charts are basic collection consists of more than 200 colors available either in the form of fan-deck, booklet or chart in a gloss or semi-matt finish & globally accepted format for colour definition for more than 70 years.

RAL Colour Chart K5
Colour fan deck with all RAL CLASSIC Colours

• Full page colour patches 1.97 x 5.12 inches
• Suitable for combining / comparing colours
• Semi gloss finish

we are engaged in providing the broad assortment of "RAL Colour Charts". RAL colour 4-digit references have been an accepted format for colour definition for more than 70 years.

RAL Colour Charts are basic collection consists of more than 200 colors available either in the form of fan-deck, booklet or chart in a gloss or semi-matt finish & globally accepted format for colour definition for more than 70 years.

RAL Colour Chart K1
Booklet with all RAL CLASSIC Colours

• 4.09 x 7.48 inches, colour samples 0.71 x 1.1 inches
• 16 colour patches on each page
• Gloss finish

Product Details:

As an Authorized dealer we are engaged in providing the broad assortment optical instruments.

Transmission Meter is special for film, window tint, filmed glass and side windshield test, it’s a small size, portable product for transmission value measurement. It’s able to simultaneously measure and display Visible transmission values and UV, Infrared rejection values.

Directly display the rejection rate of UV and infrared. In this way, when the customers are testing the performance of a solar film or a filmed glass, they can directly know the UV and infrared rejection rate of their measured sample, and don’t need to calculate how much 100% minus the transmission.

Specification: 

• VL Peak wavelength: 550nm
• UV Peak wavelength: 365nm
• IR Peak wavelength: 1400nm
• Size: 120mm *75mm *25mm(L*W*H)
• Thickness of testing sample: < 8mm
• Resolution: 0.1%
• Accuracy: ±2%(Colorless and transparent material)
• Weigh: 165g (include batteries)
• Battery: 4*AAA alkaline battery

Fetures

• The testing slot is up to 8mm, can test filmed glass directly .
• Compact, portable, battery powered, ultra-low power consumption.
• UV rejection meter, IR rejection meter,Visible light Transmittance Meter, Three functions in ONE device.
• Simple operation, rapid measurement, putting the testing sample in the “OPENING”, UV, VL and IR transmission values of the sample will simultaneously display immediately.
• Suitable for measure film, filmed glass, window tint, side windshield etc. Test for performance demonstrate, production, QA, inspection and so on many occasions

Standard Packing List 
LS162A Transmission Meter * 1pcs
AAA battery * 4pcs
User Manual * 1pcs

 

 

 

 

Additional Information:

• Item Code: AP-LS162A
• Delivery Time: Ex.Stock
• Packaging Details: LS162A Transmission meter, AA battery, User Manual

Product Details:

As an Authorized dealer we are engaged in providing the broad assortment optical instruments.

Split transmission meter has three independent testing units to measure the transmittance value of ultraviolet light, infrared light, and visible light.

is able to simultaneously measure and display..

1. UVR(Ultra Violet Rejection) value.
2. IRR(Infrared Rejection) value.
3. VLT(Visible Light Transmission) value

 

It is used for the transmittance testing of glass, plated film, organic materials, solar film and other translucent materials such as insulating glass, filmed glass, PMMA materials etc.

It consist of two parts: main part for measuring and displaying functions and the auxiliary part for light source and laser light for alignment.

Specifications :

•  VL Peak wavelength: 550nm
•  UV Peak wavelength: 365nm
•  IR Peak wavelength: 940nm
•  Resolution: 0.1% for measured value<10% and 1% for other ranges
•  Accuracy: better than +/-2% (Colorless and transparent material)
•  Test sample size: > 40*40mm
•  Power supply: built-in lithium rechargeable battery
•  Dimension: 140mm  x 82mm  x 92mm (length  x width  x height)
•  Weight: 680g

Features :

ø Two-parts dual mode of the main and auxiliary part facilitates the transmittance measurement of the automobile front windshield glass and building glass.

ø The built-in lithium rechargeable battery is easy for use without replacing the battery;

ø Use the USB port of computer to charge the meter via the built-in charger;

ø The laser alignment function guarantees the accurate alignment of the main part with the auxiliary part in the process of measurement and ensures accurate measurement.

ø Three light Transmittance Meter in one device; result is the average of three values

ø Two laser for two part alignment, more accuracy.

 

 

Product Details:

Online Optical Density Monitor is a non-contact online thickness tester for coating aluminized film, use the principle of optical transmittance to monitor the process of vacuum coating machine and the production line of glass, has two kinds of methods to display: transmittance and optical density.

The material of transmittance (optical density) and a certain proportion relationship with material of coating thickness. So by monitoring materials of optical transmittance (optical density) to achieve the uniformity of monitoring materials, the purpose of the coating thickness. As long as it is light through the material, can be monitored by monitoring the light transmittance product quality. Such as winding vacuum coating, coating, glass/film production line and so on.

System is divided into 3 parts:

a) Detection systems : Includes the source, receiver, controller and aluminum bracket;

b) Human-computer interaction devices : 7 inch LCD MMI, display the transmittance and optical density data of every test points.

c) Computer real-time monitoring system(Optional) : Data record, analysis, reporting, and other functions.

Due to the measured sample of this customer is more special, the card slot of our conventional glass transmittance on-line monitoring device is 20mm wide, can not meet customer needs. So we customized a flexible program, the test points, controllers and human-machine display interface will be provided by our company to test , collect, output and display dates. As for the bracket part,it will be customized according to the customer’s requirements. For this situation, the users will take the installation problem into account because my company doesn’t provide the whole set of glass transmittance on-line monitoring device.

This instrument provides dual RS485 communication interface, the standard MODBUS communication protocol, convenient for communications among LC, single-chip computer, MMI, kingview and computer. Coating machine can read directly optical density data of the equipment to realize the automatic control (closed-loop control).

Parameter:

1. Wavelength: according to the customer‘s need to choose, there are following option

Infrared : 850nm(the default option, strong anti-interference ability),

Visible light : 380nm-760nm(white light),

Green light : 530nm

2. Accuracy : ±1%

3. Resolution : 0.005%

4. Density measuring range : 0.00 -5.00 OD

5. Density resolution : 0.01 for 0.00 - 3.00 OD,

0.05 for 3.00 - 5.00 OD

6. The maximum measured points : 36

7. Distance between adjacent probe head:≥70mm

8. Distance between the sending and receiving probe: 20mm

9. Temperature range:-20°C +70°C

10. Data refresh cycle:300ms

11. Size:100mm*230mm(W*H) Length according to customer requirements

12. The number of flange electrode:

6 (Not deserve a computer monitor)

9 (Deserve a computer monitor)

13. Power supply:220V AC/50Hz

14. Communication:dual RS485.

Product Details:

As a Authorized dealer we are engaged in providing the broad assortment of wide gamut of optical instruments for various applications. APLS117 Optical Density Meter is used to measure the transmittance and optical density of the various materials.

Specification :

Parameter:
1.  Density Measuring range:  0.00 --- 6.00 OD
2.  Dot Area Measuring range: 0 --- 100%
3.  Resolution: 0.0005% Transmission / 0.01 OD
4.  Density Accuracy: +/-0.02 (0 -2.00 OD)
                      +/-2% (2.00-6.00 OD)
5.  Transmittance Accuracy: +/-1%(0% --- 50%)
                         +/-2%(50% --- 100%)
6.  Aperture: 2mm
7.  Light source: ANSI/ISO Visual
8.  Power supply: 4*AAA alkaline battery

Features:
1.  Completely self-contained operation. No independent power supply or light source required.
2.  Ideal for all graphic arts film applications, from quality control to calibration.
3.  Directly measures density, density difference and dot area.
4.  Simple to operate and easy to use
5.  Able to measure densities up to 6.0 OD

Advantage:

1. Transmittance measurement for diffuse transmission material.

2. All graphic arts film, measuring absolute optical density and relative density and dot area

3. X-ray film, aluminum film materials etc, measuring absolute optical density.

4. All kinds of milky white, fog material, measuring light transmittance.

5. Directly measures absolute optical density, relative optical density and dot area.

6.Completely self-contained operation. No independent power supply or light sourcerequired.

Important three types of product measurement:

A) The transmittance of various diffuse transmission materials such as milky, fogged, abrasive, matte materials

B) Absolute optical density of materials like X ray film, aluminum film.

C) All graphic arts film, measuring absolute optical density and relative density and dot area

Color light box can accommodate up to 5 light sources. The consistency of the light sources in all Colour Assessment Cabinets gives excellent viewing conditions for reliable colour critical decisions under consistent lighting.
Color light box can be applied to the industries that need to perform color difference testing as follows: as the premiere designer and manufacturer of color matching instrument products for the Graphic arts, Photographic, Textile, Dyeing, Packaging, Printing, Leather, Inks, Knitwear, Plastic, Automotive and Ceramics industries.

Remarks: Optional tubes D50, D75, TL83, U30, U35, A

 

 

Product Details:

MatchColor is a full software with 6 modules. As far as it is very complete, it is mainly dedicated to big factory which have a color laboratory with colorist using it all day long. The 6 modules are:

1-Color Quality Control with different indexes (WI, YI, Opacity, Color strength) and graphics.

2-Approach Search which allows to classify all colors in a file (spectral or formulas files) from a standard.

3-Colorant Characterization: This module uses a spectral file of all colorants letdowns (some mixtures with white and one with black) and measurements (made in general with quality control module). It allows calculating and displaying the fitting curves of K (light absorption) and S (light diffusion) versus concentration. It allows building up what we call a colorant file.

4-Formulation by Combination: This formulation module combines all the colorant of a colorant file to calculate thousands of formula and display the best regarding DE, price or metamerism.

5-Manual/Automatic Formulation: With this module, the user selects manually the colorants he wants to use in the formula. Then formulation can be calculated automatically by curve fitting or by color coordinate. This mode can be very useful in a research laboratory to do simulations

6 - Correction Module: 2 correction modes are available: - Correction by reformulation. The software calculates a new formula which give the correction to match the standard - Correction by adding. The software calculates the minimum quantity of each colorant you need to add in a given basic quantity. This mode is also used to recycle work off products.

MatchColor can support various models of spectrophotometer.

Additional Information:

• Packaging Details: MatchColor is a full software with 6 modules.