Coating Inspection

Product Details:

Coating thickness gauge probes are fully interchangeable and are available in a number of designs and scale ranges to meet your standards.

All probes have a maximum operating temperature of 80°C (176°F) with the exception of separate ferrous probes 150°C (300°F) and Hi-Temperature PINIP’s 250°C (480°F). The stated temperature is the substrate temperature, and the duty cycle of the probe must be reduced to ensure a minimal temperature build-up within the probe.

Coating Thickness Gauge Probe Range :

 

• Standard Straight Probes

 

Standard probes measure coatings on both flat and curved surfaces.

 

• Mini Probes

Mini probes are ideal for harder to reach areas and edges.

 

• Right Angle Probes

Designed for taking coating thickness readings where access is restricted

 

• PINIP™ Probes

Plug-in probes convert a separate coating thickness gauge into an integral gauge

 

• Telescopic Probes

Extending right angle probes for out of reach areas

 

• Scan Probes

These probes are fitted with replaceable probe caps - allowing users to take individual coating thickness measurements or scan large surface areas without damaging the probe

 

• Waterproof Probes

Sealed for use underwater at depth, even in diving gloves

 

• High Temperature Probes

For use on hot coated materials up to 250°C (480°F)

 

• Anodising Probes

Chemical resistant washable probes - ideal for the anodising environment

 

• Armoured Cable Probes

Probes with metal reinforced heavy duty cables, reducing the risk of cable damage

 

• Soft Coating Probes

Large surface area probes for soft reach materials (HVCA approved)

 

• Specialist Probes

These probes are designed for measuring coating thickness on specialist substrates, such as graphite, or electroplated components

 

 All Cating thickness gauge probes are supplied with a Test Certificate and a set of calibration foilsappropriate to the scale range of the probe.

Additional Information:

• Item Code: Apan-Elco-456-Probe
• Packaging Details: All Elcometer coating thickness gauge probes are supplied with a Test Certificate and a set of calibration foils appropriate to the scale range of the probe.

Product Details:

We are engaged in providing the broad assortment of "Protective Coatings Inspection Kits"

CSN Test Kit - Chlorides, Sulphates & Nitrates is a complete on site test kit which can be used to accurately measure surface chloride, sulphate and nitrate ions from only one test sample, results are in ppm & ugcm-2 - no complicated calculations needed.

Surface contamination from salts such as chlorides, sulphates and nitrates have been shown to lead to blistering of organic coatings, particularly in immersion conditions.

Includes :

5 x Chloride tests
5 x Sulphate tests, together with 1 x colorimeter, for sulphate testing
5 x Nitrate test strips
5 x Syringes (without needles)

Can be used in accordance with
ISO 8502-5, ISO 8502-11, SSPC Guide 15

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

Additional Information:

• Packaging Details: 5x tests (containing: 5x chloride tests, 5x nitrate test strips, 5x sulphate tests, 5x syringes) 1x colorimeter, carry case and operating instructions

Product Details:

Payne Permeability Cups are made entirely from anodised aluminium and are used to determine the permeability of films of paints, varnish, plastic, cellophane, etc.

The water evaporates or is absorbed and, after a certain time, the weight change relative to the film thickness is calculated, indicating the degree of permeability or permeance.

 

We are engaged in providing the broad assortment of "Protective Coatings Inspection Kits" .

Hazardous Area Inspection Kit is a protective coating inspection kit suitable for use in hazardous areas where electronic equipment is prohibited.

The kit provides all the tools required for the on-site inspection of a coating, including surface profile, dewpoint, relative humidity, both wet and dry film thickness and also adhesive testing.

Measurement parameters include:

• Surface inspection
• Surface profile
• Surface contamination
• Climatic conditions
• Coating thickness
• Adhesion

Model Description

Pictorial Standards

Surface Comparator, Grit

Surface Comparator, Shot

Testex Tape, Coarse

Testex Tape, Extra Coarse

Testex Dial Thickness Gauge

Telescopic Inspection Mirror

Chlor Test Surface Testing Kit

Magnetic Thermometer °C (°F)

Whirling Hygrometer °C (Metric),

Sling Hygrometer °F (Imperial)

Dewpoint Calculator

Hexagonal Wet Film Comb: 25 -3000µm (1 - 120mils)

Thickness Gauge

Cross Hatch Full Kit - ISO (ASTM) Tape, Brush & Eye Glass

Standards:

 

AS 1580.408.4, AS 2331.1.3, AS 3894.3-A, AS 3894.5, AS 3894.9, AS/NZS 1580.107.3, AS/NZS 1580.108.1, ASTM B 499, ASTM D 2200, ASTM D 3359-B, ASTM D 4414-A, ASTM D 4417-A, ASTM D 4417-C, ASTM G 12, BS 3900-C5-6A, BS 3900-C5-7B, BS 3900-E6, BS 5411-11, BS 7079-C5, DIN 50981, ECCA T6, EN 13523-6, IMO MSC.215(82), IMO MSC.244(83), ISO 16276-2, ISO 2178, ISO 2409, ISO 2808-1A, ISO 2808-6A, ISO 2808-7A, ISO 2808-7B, ISO 8501-1, ISO 8503-1, ISO 8502-5, ISO 8503-2, ISO 8503-5, JIS K 5600-1-7, JIS K 5600-5-6, NACE RP0287, NF T30-038, NF T 30-124, NF T30-125, SS 55900, SSPC Guide 15, SSPC-PA2, SSPC VIS 1, SSPC VIS 2, SSPC VIS 3, SSPC VIS 4, SSPC VIS 5, US Navy NSI 009-32, US Navy PPI 63101-000

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

 

 

We are engaged in providing the broad assortment of make "Protective Coatings Inspection Kits"

Paint Body Shop Inspection Kit specifically for the automotive after market, including Insurance Assessors, 3rd party consultants, Paint body shops and used car sales, these kits provide an instant measure of the coating thickness of panels. An illuminated magnifier is supplied to enable close inspection of bodywork.

Model Description

Digital Coating Thickness Gauge

Illuminated Magnifier (x10)

Can be used in accordance with:
AS/NZS 1580.108.1, ASTM B 499, ASTM D 7091, ASTM E 376, ISO 2360, ISO 2808-12, ISO 2808-7C, ISO 2808-7D, NF T30-124

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

Additional Information:

• Item Code: Apan-Elcometer-YKITAUTOMOTIVE-1
• Packaging Details: Elcometer Automotive Inspection Kit 1

we are engaged in providing the broad assortment of "Protective Coatings Inspection Kits".

As per 'Heating & Ventilation Contractor’s Association - HVCA' Guidelines to Good Practice, for the measurement of dust and grease deposits within ventilation systems and kitchen ducts made of ferrous metals Elcometer Duct Deposit Measuring System is designed for the specific requirement of the 'Deposit Thickness Test - DTT'

Main purpose is to controlling ducting deposits and monitoring their build-up is essential to maintain hygiene standards and reduce fire risks in heating and ventilation systems. By using t DFT meter Ferrous Top Gauge with the specially designed probe and duct cleaning templates, readings can be taken of the deposit thickness on a specific test area, before and after cleaning. ElcoMaster™ 2.0 software, supplied as standard with the Duct Deposit Measuring System includes a template designed specifically for reporting duct deposit measurements. It is used in Ductility Test, Ductile Iron Casting, Galvanized Flat Duct and Industrial Ducting Works.

Following list of accessories are available compatible to kit :

• Elcometer 456 Duct Probe
• Duct Cleaning Template
• Precision Foil Set: Scale 2B; 0 - 5mm (0 - 200mils)
• Certified Precision Foil Set: Scale 2B; 0 - 5mm (0 - 200mils)
• Ferrous Zero Plate
• USB Bluetooth® Transmitter/Receiver

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

We are engaged in providing the broad assortment of Surface Contamination Kit. Portable quick and easy method of measuring surface contaminants supplied with test strips to measure:

• pH
• Iron (ferrous ion)
• Chloride
• Salt

Surface contamination from salts such as chlorides, sulphates and nitrates have been shown to lead to listering of organic coatings, particularly in immersion conditions.

Measuring the surface cleanliness of the substrate alone prior to a coating being applied may not be sufficient. If more than one layer of coating is being used, it is necessary to monitor and record the cleanliness of each layer prior to applying the next coating. When using amine cured epoxy coatings, for example, in low ambient temperatures or in high humidity, a surface oiliness or exudate may cause intercoating adhesion failure. It is used as a Chloride Test Kit, PH Testing Paper, and Salt Testing Kit.

Measuring Range:

• pH : 0pH to 14pH
• Iron : 3 - 10 - 25 - 50 - 100 - 250 - 500mg/I Fe²
• Chloride: 30-600µg/cm² (30ppm) Cl to 600µg/cm² (600ppm) Cl

Includes :

• Model Description
• A Bresle Sampler (Box of 50)
• 3 x 5ml (0.1fl oz) Syringes
• 3 x Needles
• Plastic Beaker, 30ml (1fl oz)
• 100 x pH Test StripsT13820563 100 x Iron Test Strips
• 40 x Chloride Test Strips

Can be used in accordance with: AS 3894.6-A, AS 3894.6-D, SSPC Guide 15

A well-integrated service support is provided from service centre with team of factory trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

Measuring the level of contaminants on a surface prior to application of the coating is essential to ensure the quality of the coating and that its optimum lifetime is achieved.

If the coating is applied to a contaminated surface, which is not properly prepared, it could fail prematurely resulting in costly recoating and high maintenance costs.

Chloride Test Strips

Chloride ions on a steel surface increase the probability that corrosion of the steel will take place even if a protective coating is applied. Chloride ions trapped under a coating in the presence of steel and moisture will form a corrosion cell. This corrosion process will result in premature failure of the protective coating and may cause blistering of coatings in immersion service.

The chloride test strips will indicate the concentration of chloride ions in the sample solution and if the area of sample collection and the volume of water is known the concentration can be measured in parts per million or micrograms per millilitre.

Iron Test Strips
Ferrous ions are an indicator of the corrosion of steel as they are formed when the iron oxidises as a result of a corrosion cell formed between the steel and oxygen in the presence of water. The ferrous ion test strips will also indicate the concentration of ferrous ions in a sample solution in the same way as the chloride strips.

pH Test Strips
These strips will determine if a solution or surface is acid or alkaline in nature. Acids form when certain gases are dissolved in water, for example chlorine in water produces hydrochloric acid, carbon dioxide in water produces carbonic acid, sulphur dioxide in water produces sulphuric acid all of which are corrosive to steel.

The presence of these contaminants can either be detected in a solution washed from the surface or by putting a wet ph Test Strip on to the dry surface. pH does not measure the concentration but it does indicate how acidic or alkaline the surface is. 

Chloride Test Kit includes the Conductivity Meter. This lightweight, portable conductivity meter accurately measures the salinity of the test samples.

It is essential that the level of contaminants on a surface is measured prior to application of the coating to ensure the quality of the coating and that its optimum lifetime is achieved. If the coating is applied to a contaminated surface, which is not properly prepared, it could fail prematurely resulting in costly re-coating and high maintenance costs. It is also known as Chloride Test Kit, Salt Testing Kit, Digital Salt Meter and Conductivity Meter.

Includes :

• Elcometer 138 : Conductivity Meter
• E135----B : Bresle Patches (Box of 25)
• T13818517 : 3 x 5ml (0.1fl oz) Syringes
• T13818518 : 3 x Needles
• T13818519 : Plastic Beaker 30ml (1fl oz)
• T13823926 : Standard 1.41 mS/cm Calibration Solution
• T99911344 : Pure Water 250ml (8.5fl oz) Bottle
• 14ml (0.5fl oz) bottle of moistening solution

Can be used in accordance with AS 3894.6-A, IMO MSC.215 (82), IMO MSC.244 (83), ISO 8502-6, ISO 8502-9, SSPC Guide 15, US Navy NSI 009-32, US Navy PPI 63101-000.

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

Product Details:

SaltSmart™ Salt Contamination System determines the amount of soluble salts present in a test sample. Using both the Elcometer SaltSmart™ Test Strips and the SaltSmart™ Contamination Meter, this system offers a fast, easy-to-use alternative to the Bresle Test and has been proven to be equivalent to ISO 8502-9.

A de-ionised water bottle is attached to the end of the SaltSmart™ Test Strip which is then fixed to the substrate using non-residue tape.  The test strip is positioned at a 10° angle to allow the water to flow on to the foam sensor which is in contact with the substrate.

After approximately 8 minutes the test strip is removed and the amount of soluble salts present is measured using the Elcometer 146 SaltSmart™ Contamination Meter, which displays and stores results in µS/cm, ug/cm² or mg/m².

SaltSmart^™ Contamination Meter replaced by the Elcometer 130 SSP Soluble Salt Profiler

Product Details:

Pfund Cryptometer offers a simple and accurate method to test wet film hiding power or determine thickness needed for complete opacity, It can gives estimate of coverage in square meters per liter and very be suitable for use with coatings containing pigments.
Pfund Cryptometer consists of a glass plate, half black half white as the base. Each half of this base has a scale engraved from 0-50mm along one edge starting from the division in the center. Two glass top plates are included with each instrument and these have two metal supports at one end so that these transparent top plates rest at an angle when placed upon the black and white area of the base plate.
The top plates differ in the length of their tiny supports so that different angles are formed between the top plates and the base plate. A wedge angle constant???K???is given to each top plate. These range from the smallest angle K=0.002 to K= 0.0035, K= 0.004, K= 0.007 and the largest K=0 .008, the popular constants being K=0.004 and K=0.008.
How to Use your Cryptometer ?
The appropriate top plate for the paint to be tested is selected, usually K=.008 for light coloured paints and K= .004 for dark coloured paints. (Alternatively, K= 0.002 for higher opacity coatings and K= 0.007 for less opaque coatings). A blob of paint, typically 3-5 ml is placed in the center of the base plate close to the black/white division. For light colours, the top plate (e.g. K= .008) is placed over the paint with the supports on the white area of the tile. The top plate is pressed down firmly so that the paint is spread without air bubbles to form a shallow wedge between the plates. This wedge will move with the top plate, the position of which is adjusted until the moment that the black/white division disappears. The scale reading is then noted from the black scale where the edge of the top plate makes contact with the base plate. When testing a dark coloured paint the top plate (e.g. K= .004) is used and the scale reading taken on the white area.
The thickness of paint in millimeters over the black and white division is obtained by multiplying the scale reading times the wedge constant K of the top plate used. This figure records the minimum film thickness necessary to obscure the black and white. The coverage or spreading power for this thickness can be obtained directly from the conversion tables below for each of the top plates.
Specificaions :
??? Reflectance of white part???80±2??? Reflectance of black part???≤2??? Weight???1.0 Kg??? Dimensions???100mm×170mm×20mm. ???L×W×H???

Scope of supply :

• Pfund Cryptometer
• Glass Plate K=0.002
• Glass Plate K=0.0035
• Glass Plate K=0.004
• Glass Plate K=0.007
• Glass Plate K=0.008

"Protective Coatings Inspection Kits" provide all the tools required for onsite inspection of a coating, including surface profile, dewpoint, relative humidity, adhesion and both wet and dry film thickness.

Available as metric or imperial kits and housed in a sturdy, light-weight carry case, It is invaluable to the operator in the field to ensure the coating is, or has been, applied correctly and is fit for purpose, removing the need for guesswork.

Model Description

Testex Replica Tape - Coarse, 20 - 64µm (0.5 - 2.5mils)

Replica Tape - X-Coarse, 38 - 115µm (1.5 - 4.5mils)

Thickness Gauge

Whirling / Sling Hygrometer

Dewpoint Calculator

Digital Thermometer °C (°F) with surface probe

Cross Hatch Cutter

Hexagonal Wet Film Comb 25 - 3000µm (0 - 120mils)

Integral Digital Coating Thickness Gauge Model B
Ferrous 0 - 1500µm (0 - 60mils)

Can be used in accordance with:

AS 1580.408.4, AS 2331.1.4, AS 3894.3-B, AS 3894.9, AS/NZS 1580.107.3, AS/NZS 1580.108.1, ASTM B 499, ASTM D 1186-B, ASTM D 1400, ASTM D 3359-B, ASTM D 4414-A, ASTM D 4417-C, ASTM D 7091, ASTM E 376, ASTM G 12, BS 3900-C5-6A, BS 3900-C5-6B, BS 3900-C5-7B, BS 3900-E6, BS 5411-11, BS 5411-3, BS 5599, BS 7079-C5, DIN 50981, DIN 50984, ECCA T1, ECCA T6, EN 13523-1, EN 13523-6, IMO MSC.215(82), IMO MSC.244 (83), ISO 1461, ISO 16276-2, ISO 19840, ISO 2063, ISO 2360, ISO 2409, ISO 2808-1A, ISO 2808-6A, ISO 2808-6B, ISO 2808-7B, ISO 2808-7C, ISO 2808-7D, ISO 2808-12, ISO 8503-5, JIS K 5600-5-6, NACE RP0287, NF T30-038,NF T30-124, NF T30-125, SS 184159, SSPC PA 2, US Navy PPI 63101-000, US Navy NSI 009-32

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

We are engaged in providing the broad assortment of all the tools required for onsite inspection of a coating, including surface profile, dewpoint, relative humidity, adhesion and both wet and dry film thickness.

Available as metric or imperial kits and housed in a sturdy, light-weight carry case, Coatings Inspection Kits are invaluable to the operator in the field to ensure the coating is, or has been, applied correctly and is fit for purpose, removing the need for guesswork.

 

Model Description

Testex Replica Tape - Coarse,20 - 64µm (0.5 - 2.5mils)

Testex Replica Tape - X-Coarse,38 - 115µm (1.5 - 4.5mils)

Thickness Gauge

Integral Digital Surface Profile Gauge Model B 0 - 500µm (0 - 20mils)

Digital Dewpoint Meter Standard

Hexagonal Wet Film Comb 25 - 3000µm (1 - 120mils)

Cross Hatch Cutter

Ferrous Separate Digital Coating Thickness Gauge Model S

Ferrous Standard Separate Probe 0 - 1500µm (0 - 60mils)

Software CD and USB Cable

 

Can be used in accordance with:

AS 1580.408.4, AS 2331.1.4, AS 3894.3-B, AS 3894.9, AS/NZS 1580.107.3, AS/NZS 1580.108.1, ASTM B 499, ASTM D 1186-B, ASTM D 1400, ASTM D 3359-B, ASTM D 4414-A, ASTM D 4417-B, ASTM D 4417-C, ASTM D 7091, ASTM E 376, ASTM G 12, BS 3900-C5-6A, BS 3900-C5-6B, BS 3900-C5-7B, BS 3900-E6, BS 5411-11, BS 5411-3, BS 5599, BS 7079-B4, BS 7079-C5, DIN 50981, DIN 50984, ECCA T1, ECCA T6, EN 13523-1, EN 13523-6, IMO MSC.215(82), IMO MSC.244 (83), ISO 1461, ISO 16276-2, ISO 19840, ISO 2063, ISO 2360, ISO 2409, ISO 2808-1A, ISO 2808-6A, ISO 2808-6B, ISO 2808-7B, ISO 2808-7C, ISO 2808-7D, ISO 2808-12, ISO 8502-4, ISO 8503-5, JIS K 5600-5-6, NACE RP0287, NF T30-038, NF T30-124, NF T30-125, SANS 5772, SS 184159, SSPC PA 2, US Navy PPI 63101-000, US Navy NSI 009-32

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

We are engaged in providing the broad assortment of "Protective Coatings Inspection Kits" provide all the tools required for onsite inspection of a coating, including surface profile, dewpoint, relative humidity, adhesion and both wet and dry film thickness.

Available as metric or imperial kits and housed in a sturdy, light-weight carry case, Elcometer Protective Coatings Inspection Kits are invaluable to the operator in the field to ensure the coating is, or has been, applied correctly and is fit for purpose, removing the need for guesswork.

Model Description

Testex Replica Tape - Coarse, 20 - 64µm (0.5 - 2.5mils)

Testex Replica Tape - X-Coarse, 38 - 115µm (1.5 - 4.5mils)

Thickness Gauge

Separate Digital Surface Profile Gauge Model T

Standard Separate Probe, 0 - 500µm (0 - 20mils)

Digital Dewpoint Meter Top

Hexagonal Wet Film Comb 25 - 3000µm (1 - 120mils)

Cross Hatch Cutter

Ferrous Separate Digital Coating Thickness Gauge Model S

Ferrous Standard Separate Probe 0 - 1500µm (0 - 60mils)

Software CD and USB Cable

Can be used in accordance with:

AS 1580.408.4, AS 2331.1.4, AS 3894.3-B, AS 3894.9, AS/NZS 1580.107.3, AS/NZS 1580.108.1, ASTM B 499, ASTM D 1186-B, ASTM D 1400, ASTM D 3359-B, ASTM D 4414-A, ASTM D 4417-B, ASTM D 4417-C, ASTM D 7091, ASTM E 376, ASTM G 12, BS 3900-C5-6A, BS 3900-C5-6B, BS 3900-C5-7B, BS 3900-E6, BS 5411-11, BS 5411-3, BS 5599, BS 7079-B4, BS 7079-C5, DIN 50981, DIN 50984, ECCA T1, ECCA T6, EN 13523-1, EN 13523-6, IMO MSC.215(82), IMO MSC.244 (83), ISO 1461, ISO 16276-2, ISO 19840, ISO 2063, ISO 2360, ISO 2409, ISO 2808-1A, ISO 2808-6A, ISO 2808-6B, ISO 2808-7B, ISO 2808-7C, ISO 2808-7D, ISO 2808-12, ISO 8502-4, ISO 8503-5, JIS K 5600-5-6, NACE RP0287, NF T30-038, NF T30-124, NF T30-125, SANS 5772, SS 184159, SSPC PA 2, US Navy PPI 63101-000, US Navy NSI 009-32

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

We are engaged in providing the broad assortment of "Protective Coatings Inspection Kits" all the tools required for onsite inspection of a coating, including surface profile, dewpoint, relative humidity, adhesion and both wet and dry film thickness.

Available as metric or imperial kits and housed in a sturdy, light-weight carry case, Elcometer Protective Coatings Inspection Kits are invaluable to the operator in the field to ensure the coating is, or has been, applied correctly and is fit for purpose, removing the need for guesswork.

Model Description

Integral Digital Surface Profile Gauge Model B 0 - 500µm (0 - 20mils)

Wet Film Combs, Set of 4 :
20 – 325µm, 50 – 450µm, 50 – 750µm & 125 – 1250µm
(1 – 13mils, 2 – 18mils, 2 – 30mils & 5 – 50mils)

Cross Hatch Cutter

Dual FNF Separate Digital Coating Thickness Gauge Model T

Dual FNF Standard Separate Probe 0 - 1500µm (0 - 60mils)

Software CD and USB Cable

Can be used in accordance with:
AS 1580.408.4, AS 2331.1.4, AS 3894.3-B, AS 3894.9, AS/NZS 1580.107.3, AS/NZS 1580.108.1, ASTM B 499, ASTM D 1186-B, ASTM D 1400, ASTM D 3359-B, ASTM D 4414-A, ASTM D 4417-B, ASTM D 7091, ASTM E 376, ASTM G 12, BS 3900-C5-6B, BS 3900-C5-6A, BS 3900-C5-7B, BS 3900-E6, BS 5411-11, BS 5411-3, BS 5599, BS 7079-B4, DIN 50981, DIN 50984, ECCA T1, ECCA T6, EN 13523-1, EN 13523-6, IMO MSC.215(82), IMO MSC.244 (83), ISO 1461, ISO 16276-2, ISO 19840, ISO 2063, ISO 2360, ISO 2409, ISO 2808-1A, ISO 2808-6A, ISO 2808-6B, ISO 2808-7B, ISO 2808-7C, ISO 2808-7D, ISO 2808-12, ISO 8502-4, JIS K 5600-5-6, NF T30-038, NF T30-124, NF T30-125, SANS 5772, SS 184159, SSPC PA 2, US Navy PPI 63101-000, US Navy NSI 009-32

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

We are engaged in providing the broad assortment of "Protective Coatings Inspection Kits" all the tools required for onsite inspection of a coating, including surface profile, dewpoint, relative humidity, adhesion and both wet and dry film thickness.

Available as metric or imperial kits and housed in a sturdy, light-weight carry case, Protective Coatings Inspection Kits are invaluable to the operator in the field to ensure the coating is, or has been, applied correctly and is fit for purpose, removing the need for guesswork.

Model Description

Separate Digital Surface Profile Gauge

Standard Separate Probe, 0 - 500µm (0 - 20mils)

Digital Dew point Meter

Wet Film Combs, Set of 4
20 – 325µm,
50 – 450µm,
50 – 750µm
& 125 – 1250µm
(1 – 13mils, 2 – 18mils, 2 – 30mils & 5 – 50mils)

Cross Hatch Cutter

Dual FNF Separate Digital Coating Thickness Gauge

Dual FNF Standard Separate Probe 0 - 1500µm (0 - 60mils)


Can be used in accordance with:

AS 1580.408.4, AS 2331.1.4, AS 3894.3-B, AS 3894.9, AS/NZS 1580.107.3, AS/NZS 1580.108.1, ASTM B 499, ASTM D 1186-B, ASTM D 1400, ASTM D 3359-B, ASTM D 4414-A, ASTM D 4417-B, ASTM D 7091, ASTM E 376, ASTM G 12, BS 3900-C5-6B, BS 3900-C5-6A, BS 3900-C5-7B, BS 3900-E6, BS 5411-11, BS 5411-3, BS 5599, BS 7079-B4, DIN 50981, DIN 50984, ECCA T1, ECCA T6, EN 13523-1, EN 13523-6, IMO MSC.215(82), IMO MSC.244 (83), ISO 1461, ISO 16276-2, ISO 19840, ISO 2063, ISO 2360, ISO 2409, ISO 2808-1A, ISO 2808-6A, ISO 2808-6B, ISO 2808-7B, ISO 2808-7C, ISO 2808-7D, ISO 2808-12, ISO 8502-4, JIS K 5600-5-6, NF T30-038, NF T30-124, NF T30-125, SANS 5772, SS 184159, SSPC PA 2, US Navy PPI 63101-000, US Navy NSI 009-32

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

We are engaged in providing the broad assortment of "Protective Coatings Inspection Kits" provides a range of test equipment to help an inspector assess a substrate prior to the application of a coating.

Measurement parameters include:

• Surface inspection
• Weld inspection
• Surface cleanliness
• Climatic conditions
• Surface profile
• Coating thickness

Model Description

Pictorial Standards

Telescopic Inspection Mirror

Paint Safe Marker Pens (Pack of 3)

Weld Gauge

Dust Tape Test Kit

Bresle Salt Kit

Digital Dewpoint Meter with Magnetic Surface Probe, Top

Integral Digital Surface Profile Integral Gauge, Model T

Hexagonal Wet Film Comb: 25 - 3000µm (1 - 120mils)

Separate Digital Coating Thickness Gauge with F2 Standard Probe,
Ferrous Model T

STANDARDS:

AS 2331.1.4, AS 3894.3-B, AS 3894.6-A, AS 3894.6-C, AS 3894.9, AS/NZS 1580.107.3, AS/NZS 1580.108.1, ASTM B 499, ASTM D 1186-B, ASTM D 1400, ASTM D 2200, ASTM D 4414-A, ASTM D 4417-C, ASTM D 7091, ASTM E 376, ASTM G 12, BS 3900-C5-6A, BS 3900-C5-6B, BS 5411-11, BS 5411-3, BS 5599, BS 7079-B4, BS 7079-C5, DIN 50981, DIN 50984, ECCA T1, EN 13523-1, IMO MSC.215(82), IMO MSC.244(83), ISO 1461, ISO 19840, ISO 2063, ISO 2360, ISO 2808-12, ISO 2808-1A, ISO 2808-6A, ISO 2808-6B, ISO 2808-7B, ISO 2808-7C, ISO 2808-7D, ISO 8501-1, ISO 8502-3, ISO 8502-4, ISO 8502-6, ISO 8502-9, ISO 8503-5, JIS K 5600-1-7, NACE RP0287, NF T30-124, NF T30-125, SANS 5772, SS 184159, SS 55900, SSPC Guide 15, SSPC PA 2, SSPC VIS 1, SSPC VIS 2, SSPC VIS 3, SSPC VIS 4, SSPC VIS 5, US Navy NSI 009-32, US Navy PPI 63101-000

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

we are engaged in providing the broad assortment of "Protective Coatings Inspection Kits".

A more comprehensive kit than kits Protective Coatings Inspection Kit expands the range of instruments available to the protective coatings inspector.

 

Measurement parameters include:

• Material thickness
• Surface inspection
• Weld inspection
• Surface cleanliness
• Surface profile
• Climatic conditions
• Coating thickness
• Adhesion

Model Description

Steel Ultrasonic Thickness Gauge

Pictorial Standards

Telescopic Inspection Mirror

Illuminated Magnifier

Paint Safe Marker Pens (Pack of 3)

Weld Gauge

Dust Tape Test Kit

Bresle Salt Kit

Surface Contamination Kit

Testex Tape, Coarse & Extra Coarse

Thickness Gauge

Digital Surface Profile Separate Gauge & Standard Separate Probe

Digital Dewpoint Meter, with Magnetic Surface Probe, Top

Hexagonal Wet Film Comb: 25 - 3000µm (1 - 120mils)

Separate Digital Coating Thickness Gauge with F2 Standard Probe, Ferrous Model T

Paint Inspection Gauge with Cross Hatch Cutters 6 x 1, 2 & 3mm and ISO (ASTM) Adhesive Tape, Top

STANDARDS:

AS 1580.108.2, AS 1580.408.4, AS 2331.1.4, AS 3894.3-B, AS 3894.6-A, AS 3894.6-C, AS 3894.6-D, AS 3894.9, AS/NZS 1580.107.3, AS/NZS 1580.108.1, ASTM B 499, ASTM D 1186-B, ASTM D 1400, ASTM D 2200, ASTM D 3359-B, ASTM D 4138-A, ASTM D 4414-A, ASTM D 4417-C, ASTM D 7091, ASTM E 376, ASTM E 797, ASTM G 12, BS 3900-C5-5B, BS 3900-C5-6A, BS 3900-C5-6B, BS 3900-E6, BS 5411-11, BS 5411-3, BS 5599, BS 7079-B4, BS 7079-C5, DIN 50981, DIN 50984, DIN 50986, ECCA T1, ECCA T6, EN 13523-1, EN 13523-6, EN 15317, IMO MSC.215(82), IMO MSC.244(83), ISO 461, ISO 16276-2, ISO 19840, ISO 2063, ISO 2360, ISO 2409, ISO 2808-12, ISO 2808-1A, ISO 2808-5B, ISO 2808-6A, ISO 2808-6B, ISO 2808-7B, ISO 2808-7C, ISO 2808-7D, ISO 8501-1, ISO 8502-3, ISO 8502-4, ISO 8502-6, ISO 8502-9, ISO 8503-5, JIS K 5600-1-7, NACE RP0287, NF T30-038, NF T30-123, NF T30-124, NF T30-125, SANS 5772, SS 184159, SS 55900, SSPC Guide 15, SSPC PA 2, SSPC VIS 1, SSPC VIS 2, SSPC VIS 3, SSPC VIS 4, SSPC VIS 5, US Navy NSI 009-32, US Navy PPI 63101-000

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

We are engaged in providing the broad assortment of "Protective Coatings Inspection Kits"

The Protective Coatings Inspection Kit 6 is a comprehensive kit which incorporates all the key gauges and inspection accessories required to assess a structure before, during and after coating has been applied.

 

Measurement parameters include:

• Material thickness
• Surface inspection
• Weld inspection
• Surface cleanliness
• Surface profile
• Climatic conditions
• Coating thickness
• Adhesion
• Pinhole detection

Model Description

Steel Ultrasonic Thickness Gauge

Pictorial Standards

Telescopic Inspection Mirror

Illuminated Magnifier

Paint Safe Marker Pens (Pack of 3)

Weld Gauge

Dust Tape Test Kit

Bresle Salt Kit

Surface Contamination Kit

Testex Tape, Coarse & Extra Coarse

Thickness Gauge

Digital Surface Profile Separate Gauge & Standard Separate Probe

Digital Dewpoint Meter, with Magnetic Surface Probe,

Hexagonal Wet Film Comb: 25 - 3000µm (1 - 120mils)

Separate Digital Coating Thickness Gauge with F2 Standard Probe, Ferrous

Paint Inspection Gauge (Top) with Cross Hatch Cutters
6 x 1, 2 & 3mm & ISO (ASTM) Adhesive Tape, Top

Pinhole Detector (9 , 67.5 & 90V)

STANDARDS:

AS 1580.108.2, AS 1580.408.4, AS 2331.1.4, AS 3894.2, AS 3894.3-B, AS 3894.6-A, AS 3894.6-C, AS 3894.6-D, AS 3894.9, AS/NZS 1580.107.3, AS/NZS 1580.108.1, ASTM B 499, ASTM D 1186-B, ASTM D 1400, ASTM D 2200, ASTM D 3359-B, ASTM D 4138-A, ASTM D 4414-A, ASTM D 4417-C, ASTM D 5162-A, ASTM D 7091, ASTM E 376, ASTM E 797, ASTM G 12, ASTM G6, ASTM G62-A, BS 3900-C5-5B, BS 3900-C5-6A, BS 3900-C5-6B, BS 3900-E6, BS 5411-11, BS 5411-3, BS 5599, BS 7079-B4, BS 7079-C5, BS 7793-2, DIN 50981, DIN 50984, DIN 50986, ECCA T1, ECCA T6, EN 13523-1, EN 13523-6, EN 15317, IMO MSC.215(82), IMO MSC.244(83), ISO 1461, ISO 14654, ISO 16276-2, ISO 19840, ISO 2063, ISO 2360, ISO 2409, ISO 2808-12, ISO 2808-1A, ISO 2808-5B, ISO 2808-6A, ISO 2808-6B, ISO 2808-7B, ISO 2808-7C, ISO 2808-7D, ISO 8289-A, ISO 8501-1, ISO 8502-3, ISO 8502-4, ISO 8502-6, ISO 8502-9, ISO 8503-5, JIS K 5600-1-7, JIS K 6766, NACE RP 0188, NACE RP0287, NACE SP 0188, NACE TM0384, NF T30-038, NF T30-123, NF T30-124, NF T30-125, SANS 5772, SS 184159, SS 55900, SSPC Guide 15, SSPC PA 2, SSPC VIS 1, SSPC VIS 2, SSPC VIS 3, SSPC VIS 4, SSPC VIS 5, US Navy NSI 009-32, US Navy PPI 63101-000

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

Additional Information:

• Item Code: Apan-Elcometer-YKIT-PROTECTIVE-6
• Packaging Details: Elcometer Protective Coating Inspection Kit 6

We are engaged in providing the broad assortment of "Coatings Inspection Kits"

Digital DFT Inspection Kit have been specifically designed to undertake the three principal inspection requirements in the Protective and Industrial Coatings Industry

1. Climate
2. Surface profile
3. Dry film thickness.

Ferrous Digital Inspection Kit

Inspection kit containing entry level digital inspection equipment designed for users who want to carry out key inspection tasks.

Kit includes

• Digital Surface Profile Gauge(Model B), 0 – 500μm (0 – 20mils)

• Dewpoint Meter (Model Standard)

• Ferrous Separate Coating Thickness Gauge (Model B) with standard separate probe; 0- 1500μm (0 – 60mils)

Gauges have on-screen statistics and a rolling memory for storing up to 10 readings

FNF Digital Inspection Kits

Kit includes

• Integral Digital Surface Profile Gauge (Model B) , 0 – 500μm (0 – 20mils)

• Standard Dewpoint Meter

• Separate Coating Thickness Gauge (Model B)with standard FNF separate probe; 0- 1500μm (0 – 60mils)

A well-integrated service support is provided from service centre with team of factory trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

We are engaged in providing the broad assortment of "Protective Coatings Inspection Kits"

Digital DFT Inspection Kit have been specifically designed to undertake the three principal inspection requirements in the Protective and Industrial Coatings Industry

1. Climate
2. Surface profile
3. Dry film thickness.

Ferrous Digital Inspection Kit

Contains greater functionality for more advanced inspection processes and measurements.

Kits Includes :

Integral Digital Surface Profile Gauge (Model T ) , 0 – 500μm (0 – 20mils)

Dewpoint Meter with Magnetic Surface Probe

Ferrous Separate Coating Thickness Gauge with standard separate probe (Model T ) ; 0- 1500μm (0 – 60mils)

Data Management Software and USB Cable

Gauges have memory which can store up to 150,000b readings and Bluetooth® technology for cable free data transfer and are compatible with software, ideal for creating detailed, professional reports.

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

We are engaged in providing the broad assortment of "Protective Coatings Inspection Kits"

Qualicoat Powder Coating Inspection Kit is one quality label for the powder coating applied to aluminium architectural applications. The aim of Qualicoat is to establish the minimum standard that plant installations, coating materials and finished products which have been powder coated must meet & to the quality control of powder coated products.

Includes :

Model Description

Statistical Mini Glossmeter: 60°

Buchholz Hardness Tester

Mandrel Bend Tester with 5mm and 8mm (0.20 and 0.31”) Mandrels

Base Unit and Tube Assembly and Kit B: ISO 6272/2 and BS 6496

FNF Integral Digital Coating Thickness Gauge for smooth surfaces
(Supplied in Qualicoat Basic Kit only)

Manual Cupping Tester - Dial Gauge, mm/mils

Cross Cut Set 6 x 1, 2, 3mm with ISO or ASTM Adhesive Tape

Oven Data Logger Standard & Top Kit

Dual FNF Separate Digital Coating Thickness Gauge
with FNF Scale 1 Standard Probe; 0-1500µm / 0-60mils
(Supplied in Qualicoat Top Kit only)

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

we are engaged in providing the broad assortment of "Protective Coatings Inspection Kits".

Below list of items included in kit to enable the inspection of powder coatings on all surfaces, which also known as Coatings Inspection Equipment, Powder Coating Equipment.

Model Description:

• Elcometer 1542 : Cross Hatch Cutter. 6 x 2mm or 6 x 1mm with ISO or ASTM Adhesive Tape
• Elcometer 415 : Powder Coating Thickness Gauge
• Elcometer 137 : Illuminated Magnifier (x10)

Standards: AS 1580.408.4, AS/NZS 1580.108.1, ASTM B 499, ASTM D 7091, ASTM E 376, ISO 2360, ISO 2808-12, ISO 2808-7C, ISO 2808-7D, NF T30-124

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

Coating , Corrosion , NDT, Ultrasonic and Concrete Inspection Instruments

Grindometer, Muller Laboratory Grinder, Minimix Paint Mixer, Viscometer, Flow Cup/Gauge, Viscosity Cup, Fluidometer, Density Cup, Film Applicator, NYPC Levelling Tester, Sag Tester, Vacuum Tables, Test Charts, Spray Monitors - Self Adhesive Hiding Power, Scrub Test Panel, Circular/Linear Drying Time Recorder, Payne Permeability Cups, Coating Shrinkage, Meier Gauge, Taber Rotary Abraser, Linear Abraser, Falling Sand Tester, Abrasion and Washability Tester, Spongeability and Washability Tester, Hardness Tester, Scratch/Shear Tester, Manual Clemen Units, Barcol Impressor Hardness Tester, Shore Durometer, Conical Mandrel Bend Tester, Cylindrical Mandrel Bend Tester, Variable Impact Tester, Cupping Tester, Spectrophotometers, Colour Chart / Assessment, Novo-Curve Glossmeter, Distinctiveness of Image Meter, Shade & Opacity Meter, Thickness Gauge, DFT, Paint Meter, Dry Film Thickness Gauge, Surface Profile Gauge, Surface Roughness Tester, Salt Contamination Meter, pH Meter, CSN-Chlorides-Sulphates and Nitrates Kit, Amine Blush Chip Screen and Blush Swab Test Kit, Bresle Sampler Kit, Dust Tape Test & Roller Kit, Pictorial Surface Standards, Dewpoint Meter, Hygrometer, Digital Thermometer, Data Logger & Sensor, Anemometer, Climate Monitoring System, Moisture Meter, Wet Film Comb and Wheel, Banana Gauge, Adhesion Tester, Pinhole Detector, Porisity/Holiday Detector.

Metal Detection / Flaw :
Corrosion Gauges, Flaw Detectors, Bolt Tension Meter.

Additional Information:

• Minimum Order Quantity: 1 Piece

Product Details:

The aim of this book is to illustrate the range of defects that may be encountered in high pressure steel pipelines and pipeline coatings. It gives advice on the probable cause and significance of the defects and comments on appropriate remedial actions. This book is not intended as a complete ‘do-it-yourself manual’ for the diagnosis and analysis of defects and use of this manual will not make the user an instant expert. Many of the defects require analysis and diagnosis by a qualified expert using specialist analytical techniques. The defects included in this book encompass all aspects of high pressure steel pipeline manufacture, contruction and operation. The first section deals with defects that occur during steelmaking, rolling of the plate for pipe manufacture and the manufacturing process itself. The second section considers defects that may be introduced during the construction process. Section three deals with defects that initiate and grow after the pipeline has been commissioned. The fourth section deals with defects in the external pipe coating and the cathodic protection system and the final section provides examples of how defects interact to generate new or modified risks to pipeline integrity. Each section has been compiled and edited by experienced engineers with many years practical experience in pipeline engineering, metallurgy, welding, coatings and corrosion.

Additional Information:

• Item Code: MPDBOOK
• Packaging Details: Dimensions 210 x 148 x 15mm (8 x 6 x 0.5¿¿¿), Weight 0.4kg (1.1lb)

We are engaged in providing the broad assortment of material testing instruments like Coating, corrosion, NDT instruments.The Fitz’s Atlas 2 of Coating Defects (EFA) takes the reader through a comprehensive range of problems and discusses each in detail.

The EFA provides the user with a greater understanding of the defect, the probable cause and possible solutions. With in excess of 180 colour photographs, the user can quickly gain an insight into the coatings industry and the possible pitfalls.

Sections:

• Welding Faults: welds, cracks, surface porosity, undercut

• Surface Conditions: surface preparation, oil contamination, skip weld

• Coatings Defects: a comprehensive list of possible defects including blistering, bloom, chalking, cracking, erosion, fish eyes, orange peel

• Microscopy: blisters, bubbles, delamination, pinholes, voids, weed fouling

• Marine Fouling: animal fouling, barnacles, molluscs, weed or algae fouling

Climate Monitoring System is a powerful system which accurately and remotely monitors climatic parameters, such as relative humidity, surface temperature and Delta T temperature.

• Each red, yellow, green signal tower has an integrated alarm providing both visual and audible warnings
• Remotely monitor and record climatic parameters:
  • Relative humidity
  • Ambient air temperature
  • Surface temperature
  • Specific humidity
  • TΔ (the difference between surface temperature and dewpoint)
• It can also be used as a stand alone environmental warning station - ideal for single zone monitoring
• Up to 254 monitoring stations can be set up remotely either by Bluetooth^® or over an Ethernet TCP/IP connection

 

Climate Monitoring System is connected to a signal tower and alarm via an embedded PC which is connected to the control and monitoring computers via standard Ethernet TCP/IP or by Bluetooth^® for remote monitoring.

Through the simple use of the internationally recognised red, yellow, green traffic light sequence, Software allows Quality Managers to see, at a glance, the environmental conditions of up to 254 locations from the comfort of their office chair.

software incorporates Set Up Wizards which guide the User through the initial set up of each Monitoring Station. Once a station has been assembled and switched on, Software searches for all the active monitoring stations.

Each station can be set up remotely using Software. Station set ups include:

• Which two climate parameters to be used for each station
• User definable red, yellow and green warning limits
• Flashing red light additional warning parameter
• Data recording frequency
• Warning buzzer alarm duration

Username and passwords are used to ensure that only approved administrators can amend the set up of each station.

All measurement values (RH, SH, Ta, Ts, TΔ) from each station are transmitted back to allowing remote investigation of all the environmental conditions.

Individual reports for each monitoring station can be generated from within ElcoMonitor™ or archived in spreadsheet form for further analysis.

 

We are engaged in providing the broad assortment of “Flashpoint” testing instruments.

At the time of developing any solvent based liquid such as paint, coating, ink or perfume, it is imperative that the Flash Point is measured and declared in order to meet the stringent transport regulations laid down by governments around the world.

Flash Point is defined as "the lowest temperature of a liquid at which its vapors will form a combustible mixture with air". It is a convenient and reliable classification of the "flammability" of many substances.

Flash point measurement can be determined using different flash point test methods, including:

• Open cup flash point tests - simulate an un-contained condition, for example a spillage.

• Closed cup flash point tests - simulate an enclosed environment, for example storage in a tank or sealed container and are usually specified due to improved precision.

• Testing flammable & combustible substances for Flash Point - the "flammability" of a material determines its safety classification and the regulations under which it must be handled, stored and transported. As not all mixtures containing solvents are highly flammable, an accurate and rapid Flash Point test is vital in reporting a material’s "flammability" classification and may assist to save costs and reduce giveaway.

• Flash point tests using the "rapid equilibrium" method - traditional Equilibrium Flash Point tests such as ISO1516 and ISO1523 use any cup in a water bath to ensure that the liquid and vapor of the sample are in temperature equilibrium by adopting a complex procedure and a very slow heating rate.

Most industries need to test the Flash Point of raw materials, products or waste to ensure:

• Product quality - as a measure of consistency and performance comparison
• Compliance testing - to test safety classification for handling, storage, transport and waste
• In-service analysis - tests on in-use oils and other substances for contamination / adulteration
• General safety - to evaluate hazard potential
• Specifications - to check conformance.

Setaflash Series 3 Closed Cup Tester can be used in accordance with:ASTM D 1655, ASTM D 3278, ASTM D 3828, ASTM D 3934, ASTM E 502, BS 3900-A13, BS 3900-A11 BS 3900-A14, BS 6664-3, BS 6664-4, EN 456, ISO 3679, ISO 3680

We are engaged in providing the broad assortment of "Protective Coatings Inspection Kits".

Elcometer 7420 Digital Moisture Meter, carry case, battery and operating instructions