NDT Testing Instruments

Product Details:

We are engaged in providing the broad assortment of Pinhole & Porosity (Holiday Detector) used for detecting pinholes and flaws in insulated coatings, this detector is provided in different specifications as per the different needs of the clients.

Using state of the art electronics “DC Holiday Detector" is revolutionizes high voltage DC testing of coatings porosity detection making it safer, easier and more reliable than ever before.

DC holiday detector can be used to test porosity on coatings up to 7 mm (275 mils) thick and is ideal for inspecting coatings on pipelines and other protective coatings. This holiday tester features a built-in voltage calculator which will determine and set the correct test voltage based upon the test standard and the thickness of coating being tested.

• Voltage calculator automatically sets the correct voltage from your coating thickness value
• Voltage adjustable using the keypad - no need for screwdriver
• Internal Voltmeter/Jeep tester ensures that the test voltage equals the selected voltage
• Interchangable probes handles are available, 5kV, 15kV and 30kV DC Versions
• Dual safety switch on handle to avoid accidental switch on
• Audible and visual alarms are activated when a flaw is detected
• The speaker on the gauge clearly emits a ticking noise to indicate that there is voltage at the handle.
• The optional second hand grip is designed for two handed use without compromising its safety.
• Ideal for testing pipes and tank floors
• Battery packs can be recharged inside or outside the gauge for continued use

Elcometer 266 DC Holiday Detector Features

• Voltage calculator automatically sets the correct voltage from your coating thickness value
• Adjustable Voltage:
  • 0.5kV - 1kV in 50V steps
  • 1kV to 30kV in 100V steps
• Dual safety switch on handle to avoid accidental switch on (Grey/orange probe handles only)
• Internal Voltmeter/ Jeep tester ensures that the test voltage equals the selected voltage
• Visual and audible alarms, Bright LEDs on the handle, as well as a loud buzzer, clearly indicate when a holiday is detected
• To change maximum voltage range, select a different handle; 5kV, 15kV or 30kV DC or 30kV DC continuous
• A wide range of probe brushes and rolling springs available

Voltage calculator

Automatically sets the correct voltage from your coating thickness value. No need to use look up tables. Enter the test standard and the coating thickness and the gauge will automatically programme the correct voltage.

Adjustable Voltage

No need for screwdriver: 0.5kV - 1kV in 50V steps, 1kV to 30kV in 100V steps. Sensitivity to current can be manually preset or automatically adjusted by the gauge for partially conductive coatings.

Elcometer 266 DC Holiday Detector Safety Features

 

• Dual safety switch on handle to avoid accidental switch on. 2-stage safety switch ensures that if the Elcometer 266 handle is not gripped, the handle will switch off.
• Specialised ribbing provides superior protection while an optional second hand grip is ideal for two handed use. This holiday detector has been specifically designed to meet standard EN61010.
• The speaker on the gauge clearly emits a ticking noise to indicate that there is voltage at the handle.

It is compatible ANSI/AWWA C213, AS 3894.1, ASTM C 536, ASTM C 537, ASTM D 4787, ASTM G 6, ASTM D 5162-B, ASTM G 62-B, BS1344-11, DIN 55670, EN 14430, ISO 2746, JIS K 6766, NACE RP0274, NACE RP0188, NACE RP0190, NACE RP0490, NACE SP0188, NACE SP0490

Additional Information:

• Packaging Details: Elcometer 266 DC Holiday Detector, battery pack, curly connection cable for high voltage handle, 10m (32¿¿¿) signal return lead, battery charger with UK, EUR, US and AUS plugs, band brush, shoulder strap, tough plastic carry case and operating instructions

We are engaged in providing the broad assortment of wide gamut of NDT instruments. Ultrasonic thickness gauges are used to accurately determine the thickness of a variety of materials when only one side is accessible - ideal for monitoring corrosion and erosion.

The Elcometer NDT MTG range has a number of measurement modes available to help the user establish the most accurate thickness value.

Pulsed - Echo Mode (P-E):

Ideal for pit and flaw detection, the total thickness from the base of the transducer to the material density boundary (typically the back-wall) is measured.

Echo - Echo ThruPaint™ Mode (E-E):

Also known as ThruPaint™ mode, the coating thickness is ignored and the material thickness from the top surface of the material to the material density boundary (typically the back-wall) is measured. To use Echo-Echo ThruPaint™ mode, a high damped, coating thickness transducer is required.

Velcocity Mode (VM):

Velocity mode measures the speed of sound of materials and is ideal for determining the homogeneity of a material/alloy and the correct velocity of a material for calibration.

Factory calibrated to 39 different materials. Gauge stores 100,000 readings in up to 1,000 sequential or grid batches.

The MTG8 is the top of the range gauge with all the features and functionality necessary for measuring material thickness and velocity on virtually any material and for a wide range of applications.

As well as all the features of the MTG2, MTG4 and MTG6, the MTG8 allows users to store into memory up to three calibrations. Once saved the user can select a calibration memory without the need to re-calibrate the gauge, ideal for users who are measuring a variety of materials or thicknesses. Using the gauge’s alpha-numeric function, calibration memories can be re-named to suit the calibration setting.

The MTG8 has user definable upper and lower limits with audible and visual pass/fail warnings. Limits can be set for individual readings or for each batch. If a measurement is taken which falls outside set limits, the reading value and the limit icon turn red, the red LED flashes and the alarm beeps providing immediate indication of problem areas.

The MTG8 has Differential Mode; once a user defined nominal thickness value is set, the gauge displays the measured thickness together with the variation from the set nominal value thus indicating areas of the material which are thinner or thicker than expected.

The MTG8 offers B-Scan, a time based, cross sectional 2 dimensional graphical view of the material under test, ideal for relative depth analysis. The zoom of the B-Scan reading can either be set to automatic or can be defined by the user to focus on areas of interest.

The MTG8 can store 100,000 readings in up to 1,000 sequential or grid type batches. Using grid batching, readings are stored in a spreadsheet type format. The Obst feature, allows the user to record an obstruction within the grid.

Compatible with ElcoMaster™, PC & Mobile Apps, readings can be downloaded via USB or Bluetooth® to PC, iOS or Android™ devices for further analysis and reporting.

We are engaged in providing the broad assortment of Elcometer, UK make “Elcometer Corrosion Thickness Gauge”. The CG series series are providing users with the ability to measure up to 500mm (20”) of a user defined material; to the state of the art model CG100ABDL+, complete with an A & B Scan display, colour screen, 210,000 reading memory and the ability to measure the coating and material thickness individually or at the same time, Elcometer NDT has the corrosion thickness gauge to meet your specific inspection needs.

Using state of the art electronics, the make “Elcometer CG 10 Corrosion Thickness Gauge” is affordable precision tool, very user friendly & easy in operate. The CG10 ultrasonic gauge will hold a single, user programmable velocity & supplied ready to measure steel the velocity can be quickly changed using the simple software program . which is supplied with each unit, allowing other materials to be measured. Pre-calibrated to steel, for immediate inspection, the CG10 is the ideal model where one material is being tested day after day.

Advantages:

• Ready to use, straight from the box
• Ideal for basic thickness measurements
• Durable gauge and probe construction
• Large backlight LED display
• Tough, impact, water, dust & petroleum product resistant
• Up to 200 hours battery life

We are engaged in providing the broad assortment of Pinhole & Porosity (Holiday Detector) used for detecting pinholes and flaws in insulated coatings, this detector is provided in different specifications as per the different needs of the clients. Using state of the art electronics, "Pulsed DC Holiday detector/Porosity Detector" allows users to inspect coatings - without connecting the earth return lead to the component substrate - ideal for inspecting large surfaces and pipelines.

Features:

• 0.5 - 35kV range (user selectable) for detecting porosity in coatings up to 25mm (1") thick
• Flashing display, bright LED and a user adjustable volume alarm indicates detection of a holiday
• Internal jeep tester ensures that the selected voltage equals the test voltage
• Voltage calculator automatically sets the correct voltage from your coating thickness value
• Safety trigger integrated inside the handle cuts power if released
• Ideal for testing clean, damp, dirty or slightly conductive coatings
• Rugged, shock proof and water resistant design to ensure long life - even in harsh environments
• A wide range of interchangeable probe accessories.
• Ergonomic design, complete with shoulder strap allows long periods of continuous useThe Elcometer 280 is a ‘stick type’ holiday detector which has been designed to make pulsed DC high voltage holiday detection safer, easier and more reliable than ever before.

 

Pulsed DC Hoiday detector is compatible to many international standards like AS 3894.1, ANSI/AWWA C203, ANSI/AWWA C214, ASTM D4787, ASTM D5162, ISO 29601, JIS G 3491, JIS G 3492,NACE RP0274, NACE SP0188, NACE SP0490, NACE TM0186, NACE TM0384.

We are engaged in providing the broad assortment of wide range of Thickness measuring instruments. The UG20DL back-lit, LCD display and illuminated housing allows divers to easily read measurements in dark water. Its over-sized, single control button and clever menu structure (see side two) allow easy gauge setup and menu navigation above or below water even when wearing thick gloves. The UG20DL can store up to 5000 readings, including A-Scan Waveforms and settings for each individual measurement. There are two fi le structure options: sequential with auto identifi er and alpha numeric grid (row/column) format. The UG20DL can also transfer data and confi guration settings to a PC using our DataComm software and transfer cable (included.) The UG20DL has eight preset velocities and one custom velocity allowing the user to customize it for specifi c applications.

Features:

• 0.025 to 19.99 inches (0.63 to 508.0 mm )

• Housing is rated for dive depths up to 1000 ft (300 meters) with backlit display.
• Resolution of 0.001” (0.01 mm)user-selected units of inch or mm.
• Includes built-in datalogger for 5000 readings, settings and waveforms in sequential or “grid” (row/column) format.
• Automatic probe recognition and auto zero.
• Measure modes include Pulse-Echo, Pulse-Echo w/ Coating, Echo-Echo and Triple Echo.
• Measures BOTH wall and coating Thickness
• Both dual element and single membrane probes areavailable.
• Standard probe supplied is 1/2”-5MHz HD-Coating, Underwater.
• All gauge and datalogging settings can be done via software.

We are engaged in providing the broad assortment of Half-Cell Meter ,measures the condition and potential corrosion of rebars and steel structures within concrete.

We are engaged in providing the broad assortment of Elcometer, UK Pinhole & Porosity (Coating Detector/Spark Tester) used for detecting pinholes and flaws in insulated coatings, this detector is provided in different specifications as per the different needs of the clients.

Using state of the art electronics ” The Elcometer 236 Holiday Detector” locates all flaws in insulating coatings on conductive substrates & provides high voltage porosity testing to detect pits, flaws, holes, etc. in a wide variety of non-metallic coatings to 7 mm (275 mils) thick. Elcometer 236 DC Holiday Detector can be used to test coatings up and is ideal for inspecting pipelines and other protective coatings. Coatings on concrete can also be tested using this method if the concrete contains sufficient moisture to conduct the current that flows when a flaw is detected.

Elcometer 236 Holiday detector provides the user with complete control of voltage and sensitivity settings and is available in two versions - 15kV and 30 kV.

• Digital display of output voltage or current
• Adjustable sensitivity
• Robust and fully portable
• Audio and visual alarms for noisy environments
• 15kV and 30kV options available with fully adjustable output voltage
• Supplied with a band brush probe

Elcometer 236 DC Holiday Detector will detect coating flaws providing the coating is:

• Non-conducting.
• Applied to a conducting substrate (including concrete).
• At least 200 μm (0.008") thick, and preferably over 500 μm (0.020"), thick.

Elcometer 236 DC Holiday Detector is compatible to many international standards like ANSI/AWWA C213, AS 3894.1, ASTM C 536, ASTM C 537, ASTM D 4787, ASTM G 6, ASTM D 5162-B, ASTM G 62-B, BS1344-11, DIN 55670, EN 14430, ISO 2746, JIS K 6766, NACE RP0188, NACE RP0274, NACE RP0490, NACE SP0188, NACE SP0490

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

We are engaged in providing the broad assortment of concrete Inspection instruments. The Elcometer P120 Rebar Locator provides a simple means to detect reinforcement bars in concrete, identifying the rebar’s location, direction and an indication of the depth of concrete over the rebar. Supplied together with a 100mm (4”) search coil, leather carry case and batteries the Elcometer P120 is available in both metric and imperial versions.
Features:

• Fast, accurate and stable - Loud audio tone and clear analogue meter, with no need to re-zero the instrument during use
• High resolution controlled field search head - The strongest signal is in the centre of the search head making it accurate even when working at very close reinforcement bar centres or near metal objects, e.g. close to scaffolding or metal window frames
• Versatile - Supplied with a standard 100mm (4”) head it will also accept a 150mm (6”) head and a Borehole Probe for locating rebars and locating tendon ducts at great depths
• Rebar Plus rebar locators can quickly and easily distinguish between horizontal and vertical bars due to their highly directional detection field
• Clear Instrument Display - High quality meter shows signal strength and battery state
• Headphone socket - Clearly detect the rebar in noisy environments

We are engaged in providing the broad assortment of Concrete Cover Meter or Rebar locator. It is a gauge that measures the thickness of concrete cover over steel reinforcement bars and metal pipes. The cover meter can help to confirm the depth of the concrete, the location and orientation of reinforcement bar (rebar) or metal pipe and can even determine the diameter of the rebar. Using state of the art electronics “Elcometer 331 Concrete Cover Meter” designed to meet IP65 is rugged waterproof, easy to use, quickly and accurately locates, orientates and measures the depth of cover over reinforcement bars in the harshest of environments. A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

Product Details:

* Digital display gives exact reading with no guessing or errors; Wide measuring range and high resolution.
* Automatic stop flashing to save electricity and improve flash tube lifetime.
* Internal / external triggering fast conversion; x2 and ÷2 button for fast adjustment.
* Use photoelectric signal while external triggering, achieve automatic tracking function of the pattern.
* Use microcomputer technology, emerging technologies, anti-jamming technique and other advanced technology, it can measure the rotative velocity without contacting the object.

Range avilable :

• 50 ~ 2,000 FPM 
• 50 ~ 12,000 FPM
• 50 ~ 20,000 FPM
• 50 ~ 30,000 FPM
• 50 ~ 40,000 FPM

Additional Information:

• Packaging Details: Instrument, Sqare Flashing Tube, Rechargeable Battery, Carrying Case, Operation Manual

Product Details:

Pipe / Pipeline Inspection Camera used for sewage, pipeline, duct, drain, pipes inspection for Industrial safety and monitoring work.

Features:

• Quick snap.
• Quick video recording.
• Quick review.
• Av out.
• Video / Picture viewer.
• 15 language selected.
• Dual photo compare.

We are engaged in providing the broad assortment of Elcometer, UK “Flaw Detectors”. The FD700 series are a combined corrosion gauge and flaw detector that measures with extreme versatility.

• When the GAUGE function is set to THICKNESS GAUGE, the FD700 series becomes a Corrosion Gauge which has the ability to measure coatings and material thickness simultaneously while maintaining the ability to locate pits, flaws and defects in the material. Based on the same operating principles as SONAR, the FD700 series are capable of measuring the thickness of various materials with accuracy as high as +/- 1% or +/- 0.1 millimetres (+/- 0.005 inches) whichever is the greater.

• When the GAUGE function is set to FLAW DETECTOR, the gauges become a Flaw Detector which have the ability to detect the size and position of flaws and to differentiate between flaw types in various materials and welded joints.

The principal advantage of ultrasonic thickness measurement over traditional methods is that ultrasonic measurements can be performed with access to only one side of the material being measured.

The gauges include a data-logging (memory) facility which allows readings and waveforms to be stored in batches before being downloaded to a computer.

When the GAUGE function is set to FLAW DETECTOR, the gauges become a Flaw Detector which have the ability to detect the size and position of flaws and to differentiate between flaw types in various materials and welded joints.

• Wide range of thickness measurement modes:
A. Pulse-Echo, B. Echo-Echo, C. Echo-Echo Verify,D. Coating Only, E. Pulse-Echo With Temperature Compensation, F. Pulse-Echo With Coating

• Automatic: probe zero, probe recognition, and temperature compensation.• Adjustable gain settings.• Stores up to 64 custom setups for specific applications.• High speed scan mode of up to 50 readings per second.• Audible/visual alarm with high and low limit settings.• Differential mode for QC inspections.• Colour display.• Radio frequency RF and RECT A-Scan displays.• Time based B-Scan display for cross section material scans (thickness gauge).• Measurement data storage formats: Alpha numeric grid and sequential with auto identifier.• Data can be downloaded to a computer for analysis and storage.

• Tough, Impact, Water, Dust & Petroleum resistant• V-Path Correction

Tool kits include:

• TRIG enabling flaw detection in both surface distance and depth from the transducer.

• DAC for the creation of DAC curves which are used to inform the operator of the size of any given flaw at any depth.

• AWS function provides automatic defect sizing in accordance with AWS D1.1 structural welding code.

• AVG/DGS allows automatic defect sizing using probe data, storing up to 64 custom setups.

• TCG (time corrected gain) increases gain as time increases, in order to achieve an over all level of sensitivity for the same flaw/reflector at different distances.

Elcometer NDT offer a state-of-the-art over 450 single and dual ultrasonic transducer probes for material thickness and flaw detection inspection.

Available in a number of measurement frequencies, diameters and connection types to meet almost all applications, the Elcometer NDT range of ultrasonic transducers are also available for measurements on high temperature materials up to 480°C (900°F).

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

Industrial Flexible Endoscope System

• User can operate this system rapidly and accurately with the gloves on.
• Easy to operate, press one button for quick snapshot, or video recording or quick review.
• 3.5 inch screen, protected by water, oil, and scratch resistant.
• Provide 1 of 2 GB SD card, can support to 16 GB SD card.
• Rechargeable Lithium battery DC 5V/2A.
• Whole package case include PST-2486 product, and cable, AC adaptor, mirror, SD card, USB cable, AV out cable, Cable, and Lithium battery enclosed.

We are engaged in providing the broad assortment of Elcometer, UK make Concrete Inspection, Metal Detection and Corrosion Inspection Instruments. The Elcometer P130 will rapidly and precisely locate mild steel or stainless steel wall tie and also make an excellent stud locator / stud detector.

This small, battery operated gauge has:

• High-impact ABS control unit in tough leather case

• Search coils encapsulated in epoxy resin for unmatched ruggedness

• Built-in loudspeaker for clear audio signal; Standard 3.5mm (0.14") stereo jack socket for headphones if required

• Single control button for on/off and sensitivity/backoff control

Key Features:

• Fast and accurate - the strongest signal is in the middle of the search head making it easy to pin point the wall ties. A clear audio tone helps to identify the quick and precise location without the need to keep looking at the meter

• No need to re-zero - the Elcometer P130 is very stable in all weather conditions

• Designed with the needs of the operator in mind - easy to use, built to last, supplied with leather case and shoulder strap

• Single Handed Operation - for safety and convenience when working on scaffold or ladders

We are engaged in providing the broad assortment of Concrete Inspection equipment. Concrete structures are normally constructed using steel reinforcement and Elcometer offers Concrete Covermeters and Rebar Locators to either measure the depth of concrete over the rebar or simply to detect the rebar under the surface. Half-cell versions of the Covermeter can be used to assess the probability that corrosion is taking place on the rebar. Test Hammers are used to assess the surface hardness of cured concrete and Elcometer offers several moisture meters that can be used to determine if the structure is sufficiently dry for coating.Adhesion testers for coating on concrete are available using either hand-operated mechanical methods or the automatic hydraulic method.

Elcometer 181 Analogue Concrete Test Hammer:

• The concrete test hammer provides a quick, simple and inexpensive method for non-destructive evaluation of concrete compression strength and other masonry materials.
• Concrete test hammers are one of the most widely used instruments in the field of non-destructive testing and Elcometer offer both mechanical and digital models.
• This gauge consists of a spring loaded plunger which, when released, strikes the surface with fixed and constant impact energy. During the rebound stroke, the mass moves a pointer that indicates the maximum point of return and at the same time indicates a reference value called Rebound Number.
• This number, converted by the correlations available on the hammer, gives the compression resistance value in respect of the impact angle.

 

Key Features:

• Impact Energy 2.207 Nm
• Supplied with grinding stone to prepare test surface
• Aluminium body
• Rebound value indicated on test hammer
• Rebound value chart on body, for quick calculation of compressive strength
• Curve selection on chart dependant on testing angle

We are engaged in providing the broad assortment of Pinhole & Porosity (Holiday Detector) used for detecting pinholes and flaws in insulated coatings, this detector is provided in different specifications as per the different needs of the clients. Using state of the art electronics Pinhole Detector range utilizes the wet sponge technique and has been designed to set a new standard for wet sponge pinhole detectors - a high quality, low voltage detector with similar accessories to a high voltage spark tester. A low voltage is applied to a moist sponge. When the sponge moves over a coating flaw, liquid penetrates to the substrate and completes an electrical circuit, setting off the alarm. The wet sponge technique is suitable for measuring insulated coatings less than 500 m 'or' 20 mil on conductive substrates, and is ideal for powder coatings and other coatings where the user does not wish to damage the coating. Three model variants - single, dual or triple voltages Automatic sensitivity calibration and voltage checks Integral and separate wand functionality A wide range of fully interchangeable wand accessories Large standard sponge Low battery indicator Visual and audible alarms Easy release snag proof cables Supplied ready to use Pinhole Detector is compatible to many international standards like AS 3894.2, ASTM D 5162-A, ASTM G6, ASTM G62-A, BS 7793-2, ISO 8289-A, ISO 14654, JIS K 6766, NACE RP 0188, NACE SP 0188, NACE TM0384. A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

Professional wall detector can be used to detect metal, wood and AC live wire hidden in the wall. It is suitable for house decoration or refurbishment. It can avoid unnecessary losses when you want to dig a hole to hang a picture or install shelves and so on by locating hidden metal pipes, live wire, stud and wooden frames accurately.

 

Digital Wall-Scanner is Multifunction Metal Detector for detection of:

• Ferrous metal
• Non-ferrous metal
• Wood Cable.

These Testing Equipments are Engineering solution in major Engineering platform like Civil Engineering, Industrial Engineering, Analytical engineering, Electronics and telecommunication. Material testing instruments like coating Inspection, Corrosion Inspection, Data Leggers, Analytical instruments are popular product line.

We are engaged in providing the broad assortment of Elcometer, UK make NDT Instruments. Elcometer BG80TD & BG80TDL are tension monitors that measure the change in length of a fastener when a load is applied to the fastener. Within the elastic limit of the fastener, the change of length is proportional to the load applied, and therefore by measuring the change of length and knowing the physical properties of the fastener, the load on the fastener can be calculated. Based on the same operating principles as SONAR, the Models BG80TD & BG80TDL are capable of measuring the length of fasteners of various materials with accuracy as high as 0.0001 millimetres (0.00001 inches). Gauge can measure time, elongation, load, stress or %strain in fasteners of virtually any material from 25.4 mm to 1220mm (1” to 48”) in length. By storing the reference waveform and displaying it for comparison while the elongation is being measured, the gauge minimises operator training. The Models BG80TD & BG80TDL include a data-logging (memory) facility which allows readings to be stored in groups before being downloaded to a computer.

Product Details:

USB Endoscope / USB Video Borescope / Snake Endoscope Camera

• User can operate this system rapidly and accurately with the gloves on.

• USB cable plug to notebook, desktop pc, Laptop; photo shooting, recording ability, editing file via CD-Rom software, and saving to notebook or desktop pc or Laptop.

• Just in time inspect internal differences in the automotive engine and transmission, wall corrosion, and cracks in various small pipes, pipelines, construction, anti-terrorism search and rescue, safety inspection, archaeological finds, and other fields.

We are engaged in providing the broad assortment of material testing instruments like Coating, corrosion, NDT instruments. It detects and identifies the location of any fluid leak on thermally insulated pipes, 24 hours a day, 365 days a year, preventing corrosion and reducing unplanned repair and maintenance costs.

User Friendly:

• Ideal for use in the oil, gas, chemical, water and power generation industries, on or off-shore
• Easy to fit in new or existing installations
• Straightforward replacement - a new module can be screwed on to the original funnel assembly
• Maintenance free for 5 years with simple testing on site at any time

Accurate:

• Identifies approximate location of fluid leak, preventing unnecessary removal of good insulation
• Detachable sample vial can be sent for further testing or chemical analysis of contents

Reliable:

• Can be located where flammable gases and vapour groups IIA, AAB and AAC may be present
• 5 year warranty from date of purchase

Tough:

• Heavy duty, impact resistant, dust and waterproof design equivalent to IP66
• Works in extreme ambient temperatures -40°C to +80°C (-40°F to +176°F) and on pipe work at +180°C (+356°F)

Efficient:

• Fast installation by one operator with minimal tools required
• Battery life of 5 years
• Each module has unique serial number for traceability

Zoom in Zoom out Monitor Type Industrial Borescope can operate this system rapidly and accurately with the gloves on. Just in time inspect internal differences in the automotive engine and transmission, wall corrosion, and cracks in various small pipes, pipelines, construction, anti-terrorism search and rescue, safety inspection, archaeological finds, and other fields.

3.5 inch screen, protected by water, oil, and scratch resistant.
DC5V/2A Built-in Lithium Battery .

Application for industrial examination, bearing, home security, automobile, machinery, insect extermination, plumbing, pipeline inspection, aero examination, vessels check, locking, electric industry.

• Replace old type rigid borescope which checking objects by eyes.

• New type rigid borescope easily watching objects in LCD monitor.

• Ergonomic design and reduce eyes fatigue by long time continuous vision.

• 0^o rigid borescope available inspect front view, fields of view 54^o

90^o rigid borescope available view minimum focus at 4.5mm ~ 5mm. Suitable for auto parts examination, slippery surfaces inspection.

• 90^o rigid borescope adopt diffusion of LED light, without over exposure issue.

Features

• Optional focus distance probes

• Minimize lighting reflection.

• Detachable handle / base.

• For small tube hole checking.

 

We are engaged in providing the broad assortment of Elcometer, UK make “Pinhome & Porosity Detector” testing instruments.

The Elcometer 260 UV Pinhole Flashlight is low cost method of testing coatings for pinholes.

It is battery powered and housed in a rugged aluminium case & design with a single Watt purple light emitting diode has a beam wavelength of 405nm (±5nm), which the human eye perceives as a purple light.

A UV reflective additive is applied to the base coat. The UV flashlight shines the purple light on the coating, the base coat fluoresces where it is not covered by any subsequent coating - identifying any pinholes in the top coat.

 

• Low cost and easy to use:
  Use UV reflecting base coat and shine the purple light onto the surface. Any fluorescence identifies pinholes.

• Rugged:
  
  Manufactured from aluminium alloy and Oring sealed to protect it from moisture and dust.

• Portable and secure:
  
  Battery powered and features a click-on/push off button with lockout tail cap to prevent accidental activation during transport or storage.

 

A well-integrated service support is provided from service centre with team of trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

Laser Tachometer

Specification: LCD Display: 5 digits, with backlight

Test Range: 100 to 30000 rpm; 1.7-500rps

Resolution: 0.1 rpm (100 to 9999.9 rpm);
                0.1 rps (1.7 to 100rps)
                   1 rpm (1000-30000rpm)
                   1 rps (100-500rps)

Accuracy: +/-(0.02%n +2d)

Sampling Time: 1 Sec (over 100 rpm)

Number of impeller setting: 1-9Test

Range Selection: Automatic

Memory: Max Min

Detecting Distance: 100-400mm ; 3.9-15.7"

Time Base: Quartz Crystal

Circuit: Exclusive one-chip of microcomputer LSI circuit

Operating Temperature: -20~60¿¿¿ (-4~140)


Power Supply : 1.5V*3 AAA

Weight: 105g

Size: 121x55x28mm

Magnetic Particle Inspection (MPI) Yokes are portable, economical and highly reliable for detection of surface flaws in steel and iron components.

• AC Magnetic Yoke : AC Magnetic Particle Inspection Yoke is the new generation of light weight, ergonomically designed yokes that improve job performance and productivity by reducing operator arm and wrist fatigue when testing in tight, confined and overhead areas.

• AC/DC Magnetic Particle Yoke : AC/DC Magnetic Particle Yoke is designed for one-person portable magnetic particle inspections of ferrous parts. Ideal for inspection of welds and other remote testing. Articulating, double-jointed legs of yokes contour to any part shape to assure good contact.

• DC Yoke : Battery Operated Magnetic Yoke brings battery portability to magnetic particle yoke testing.

Features:

• Ergonomic, light-weight design
• Soft-grip, angled body for improved positioning
• 25% increased lift strength
• Wider legs for better contact
• Shields for extra leg protection
• Sealed core to resist corrosion
• Durable, rugged construction
• Serial number on each yoke
• Oil and abrasion resistant power cord

We are engaged in providing the broad assortment of concrete inspection equipments. Test hammers are used to determine the surface hardness of concrete and are one of the most widely used instruments to assess concrete compressive strength. It is the quickest, simplest and least expensive method to obtain an estimate of the quality and strength of the concrete. Test Hammers with both analogue and digital displays are available.