Apan Enterprise
Apan Enterprise
Kareli Bagh, Vadodara, Gujarat
SEND SMS
SEND EMAIL

Thickness Gauge

 

Coating Thickness Gauge

Coating Thickness Gauge
  • Coating Thickness Gauge
Ask For Price
Product Price :Get Latest Price
We are engaged in providing the broad assortment of Dry Film Coating Thickness (DFT) gauge used to measure the thickness of dry film coating, this gauge is well known in worldwide. Dry film thickness gauge is available in three different models. Each coating thickness gauge provides the user with increasing functionality. Integral coating thickness gauges are ideal for single handed operation as the wide footprint of the internal probe provides greater stability during coating thickness measurement - allowing for consistent, repeatable and accurate dry film thickness results. Separate coating thickness gauge models, with their wide range of probes, provide even greater dry film thickness measurement flexibility. Compatible with desktop and mobile software, individual coating thickness measurements can be transferred via USB or Bluetooth® to PC or a mobile device for analysis and instant report generation.

Efficient:
  • Fast reading rate of 70+ per minute, 140+ per minute with Ultra/Scan Probe
  • Multiple calibration memories
  • Alpha numeric batch identification
  • User selectable calibration methods
  • Compatible with ElcoMaster® and ElcoMaster® Mobile App


Powerful:

  • Wide range of interchangeable probes
  • USB and Bluetooth® data output to iPhone* or Android™ devices
  • Stores up to 150,000 readings in 2,500 batches
  • Measures up to 31mm (1220mils) of coating on metal substrates

The importance of Coating Thickness Gauge Calibration:

  • Formal quality systems, such as those described in ISO 9001, require coating thickness gauges to be properly controlled, logged and calibrated. Increasingly, users are specifying that the readings taken by thickness gauges are traceable to National Standards.
Request
Callback
Yes! I am Interested

DFT Meter

DFT Meter
  • DFT Meter
Ask For Price
Product Price :Get Latest Price
We are engaged in providing the wide range of Coating Inspection Instruments. Digital coating thickness gauges has been specifically designed to provide highly accurate, reliable and repeatable coating thickness measurements on almost any substrate, whether ferrous or non-ferrous. Dry Film Thickness can be measured on either magnetic steel surfaces or non-magnetic metal surfaces such as stainless steel or aluminium using a digital coating thickness gauge. The principle of electromagnetic induction is used for non-magnetic coatings on magnetic substrates such as steel. The eddy current principle is used for non-conductive coatings on non-ferrous metals substrates.
Request
Callback
Yes! I am Interested

Paint Meter

Paint Meter
  • Paint Meter
Ask For Price
Product Price :Get Latest Price
We are engaged in providing the wide range of Coating Inspection Instruments. The Eloometer 311 Paint Meter / Automotive Refinishing Gauge has been specifically designed to meet the requirements of today's automotive market. The Elcometer 311 is available in two options. The ferrous only instrument is ideal for measuring steel car body panels. The Dual FNF instrument enables the user to take measurements on both steel and aluminium car body panels using one gauge. Pre-calibrated on steel and aluminium car body panels, the Eloometer 311 is very easy-to-use. Check pieoes are supplied with each instrument to verify its performance.
Features:
  • Designed specifically to meet the requirements of the automotive industry.
  • Ferrous Only and Dual FNF gauges available
  • Pre-calibrated on automotive steel and aluminium.
  • Bigfoot“ for stable, repeatable readings.
  • Scale range of 0-5 ooum (0- 2 omils)
  • Auto on/off switch
  • Check piece included to verify
  • performance - FNF gauge
  • comes complete with ferrous
  • and non-ferrous check pieces.
  • Available in Metric or Imperial
  • Units
Request
Callback
Yes! I am Interested

Paint Meters

Paint Meters
  • Paint Meters
Ask For Price
Product Price :Get Latest Price
We are engaged in providing the broad range of Paint meter/DFT Gauge. Elcometer 355 Coating Thickness GaugeThe Elcometer 355 Coating Thickness Gauge's watchwords are accuracy, simplicity, versatility and durability making this a true state of the art hand-held measuring system packed with time-saving and cost-cutting features. Available as a standard and top model, the unit’s large memory stores up to 10,000 readings in batches and data can be output to PC, datalogger or printer as required. With a comprehensive range of Probe Modules available, simply select the most appropriate for the application. All modules are supplied with calibration foils.

 

Other Details:

  • ±1% or 1µm, whichever is the greater, accuracy
  • Rugged aluminium case designed for the toughest environments
  • ElcoMaster® software supplied
  • Full statistical analysis - mean standard deviation, number of readings, highest and lowest value
  • RS232 output
  • Date and time stamp
  • Each coating thickness gauge is supplied without a probe allowing the choice of the correct probe for the relevant applications.
Request
Callback
Yes! I am Interested

DFT Ultra Scan Probe

DFT Ultra Scan Probe
  • DFT Ultra Scan Probe
Ask For Price
Product Price :Get Latest Price
Featuring a highly durable ‘snap on’ replaceable probe cap, the Coating Thickness Gauge Ultra/Scan Probe is a revolutionary design which allows users to take individual dry film thickness readings or rapidly scan large surface areas - without damaging the probe or the coating.

 

When used in conjunction with the Coating Thickness Gauge Scan or Auto Repeat Modes, the Ultra/Scan Probe enables users to significantly reduce dry film thickness inspection times without affecting accuracy.

 

The Ultra/Scan Probe uses the Coating Thickness Gauge’s ensuring that any cap wear during use is incorporated within the calibration process. The coating thickness gauge even informs the user when to replace the cap.

  • Scan Mode

 

When the Scan Mode is selected from the coating thickness gauge, users can slide the Ultra/Scan probe over the entire surface area. As the probe is lifted off the surface the gauge displays the average coating thickness value, the highest thickness and the lowest dry film thickness values. Each set of three dry film readings (average, high and low) can be displayed on the run graph and stored into the coating thickness gauge's memory.

 

During each scan, the coating thickness gauge displays the live thickness reading together with an analogue bar graph which graphically indicates the thickness relative to both the nominal thickness and any user-defined limits.

  • Auto Repeat Mode

When the Ultra/Scan Probe is slid over the coated surface in Auto Repeat Mode, a coating thickness reading is taken approximately every half a second. Each individual dry film thickness reading is stored into the memory.

With a reading rate in excess of 140 readings per minute, the Auto Repeat Mode can significantly speed up the dry film thickness inspection of large coated areas.



  • Counted Average Mode

 

Coating Thickness Gauge are supplied with the Counted Average Mode. Once the user has defined the number of individual gauge readings to be taken within a spot measurement, the coating thickness gauge stores the average of the individual gauge readings into the memory.

 

  • Fixed Batch Sizes

 

The Fixed Batch Size feature within the Elcometer 456 Coating Thickness Gauge Model T allows users to define the maximum number of readings in each batch. Once the maximum number of readings has been reached the thickness gauge automatically opens up a new batch which is linked to the previous batch (name-1, name-2, etc.).


  • Standards and Test Methods

 

 

International Standards and test methods often describe the number of individual coating thickness gauge readings to be taken in a spot measurement and/or the number of spot measurements required over a defined surface area.

SSPC PA2 requires a minimum of three coating thickness gauge readings to be taken per spot measurement and five spot measurements over 10m2(~100ft2).

The Elcometer Coating Thickness Gauge can be set with a counted average of three and a fixed batch size of five to meet these requirements. Each batch defines an area of measurement.

When the Ultra/Scan Probe is connected to the DFT Gauge with Auto Repeat Mode selected, SSPC PA2 (or similar test methods) can be completed more than 40% faster.

Request
Callback
Yes! I am Interested

DFT Probe

DFT Probe
  • DFT Probe
Ask For Price
Product Price :Get Latest Price
We are engaged in providing the wide range of DFT gauge Probe. coating thickness gauge probes are fully interchangeable and are available in a number of designs and scale ranges to meet your specific application.
Request
Callback
Yes! I am Interested

Non-Contact Powder Thickness Gauge

Non-Contact Powder Thickness Gauge
  • Non-Contact Powder Thickness Gauge
Ask For Price
Product Price :Get Latest Price
Using third generation proven airborne ultrasonic technology, the Powder Thickness Gauge accurately predicts cured coating thickness by non-contact measurement of coating powders.

Other Details:
  • Accurately predicts the cured coating thickness within ± 5% of the reading or ±5µm (±0.25mils)
  • Ergonomic gun designed for comfort when taking multiple readings
  • Hand held sensor allows easy positioning of the gun for fast measurement
  • Large illuminated colour display with positioning graph to guide orientation of sensor probe
  • Tough aluminium case, ideal for testing in an industrial environment
Request
Callback
Yes! I am Interested

Coated Thickness Standard

Coated Thickness Standard
  • Coated Thickness Standard
Ask For Price
Product Price :Get Latest Price
We are engaged in providing the wide range of Coating Inspection Eqipments. Formal quality systems, such as those described in ISO 9000, require gauges to be properly controlled, logged and in calibration. Increasingly, users are specifying that the readings taken by gauges are traceable to National Standards. There are three types of coating thickness standards available : calibration foils, coated standards and zero test plates. Coated Thickness Standards are hard wearing, durable and are mounted in a protective folder. The calibration standards provide the user with an ideal method to accurately measure the performance of the coating thickness gauge.


Features:

  • ±2% accuracy, supplied with Calibration Certificate as standard
  • Available with either Ferrous (F) or Non-Ferrous (N) substrates
  • Each calibration standard is individually serial numbered for traceability
  • Can be re-certified by Elcometer to meet ISO requirements
  • Calibration standards available in a range of thicknesses
  • Special thicknesses can be supplied to meet specific needs
  • Coated with a hard wearing film for extended life span

Other Details:

DescriptionValues (µm)Values (mils)Certificate

4 Piece Thickness Standards - FerrousZero, 40, 75, 125, 175Zero, 1.6, 3.0, 5.0, 7.0

4 Piece Thickness Standards - Non FerrousZero, 40, 75, 125, 175Zero, 1.6, 3.0, 5.0, 7.0

4 Piece Thickness Standards - FerrousZero, 50, 80, 125, 200Zero, 2.0, 3.0, 5.0, 8.0

4 Piece Thickness Standards - FerrousZero, 50, 150, 250, 500Zero, 2.0, 6.0, 10, 20
Request
Callback
Yes! I am Interested

Precision Foil for DFT Meter

Precision Foil for DFT Meter
  • Precision Foil for DFT Meter
Ask For Price
Product Price :Get Latest Price
Calibration foils or shims are the most convenient way of creating a coating thickness standard on the substrate material, surface finish or form. Shims provide the ideal method for adjusting the calibration of the coating thickness gauge to ensure the greatest possible accuracy.

Other Details:

ColourDimensionsValues*Certificate+

Silver50 x 25mm (1.97 x 0.98")12.5µm (0.5mil)ο

Purple50 x 25mm (1.97 x 0.98")25µm (1.0mil)ο

Dark Blue50 x 25mm (1.97 x 0.98")50µm (2.0mils)ο

Green50 x 25mm (1.97 x 0.98")75µm (3.0mils)ο

Brown50 x 25mm (1.97 x 0.98")125µm (5.0mils)ο

Peacock Blue50 x 25mm (1.97 x 0.98")175µm (7.0mils)ο

White50 x 25mm (1.97 x 0.98")250µm (10mils)ο

Black50 x 25mm (1.97 x 0.98")500µm (20mils)ο

Grey-Blue50 x 25mm (1.97 x 0.98")1000µm (40mils)ο

Clear50 x 25mm (1.97 x 0.98")1mm (40mils)ο

Off White50 x 25mm (1.97 x 0.98")1500µm (60mils)ο

Clear50 x 25mm (1.97 x 0.98")2mm (80mils)ο

Clear50 x 25mm (1.97 x 0.98")3mm (120mils)ο

Clear50 x 25mm (1.97 x 0.98")4mm (160mils)ο

Clear50 x 25mm (1.97 x 0.98")8mm (310mils)ο

Greyn/a1500µm (60mils)ο

Greyn/a5000µm (197mils)ο
Request
Callback
Yes! I am Interested

DFT Gauge Precision Foil Sets

DFT Gauge Precision Foil Sets
  • DFT Gauge Precision Foil Sets
Ask For Price
Product Price :Get Latest Price
We are engaged in providing the wide range of DFt gauges accessories. All coating thickness gauge calibration foils are ideal for use in the laboratory, on the production line or on site. Calibration foils or shims are the most convenient way of creating a coating thickness standard on the substrate material, surface finish or form. Shims provide the ideal method for adjusting the calibration of the coating thickness gauge to ensure the greatest possible accuracy.


Features:

  • Metric and Imperial values displayed on each calibration foil
  • Available individually or in shim sets
  • Precision foils with ±1% accuracy
  • Each shim has a unique serial number for traceability
  • Shims are available in thicknesses from 12.5μm to 20mm (0.5 to 790mils)
Request
Callback
Yes! I am Interested

Zero Test Plate

Zero Test Plate
  • Zero Test Plate
Ask For Price
Product Price :Get Latest Price
We are engaged in providing the wide range of coating Inspection Instruments. We provides a range of Zero Test Plates to ensure correct calibration of the coating thickness gauge.When used in conjunction with a set of foils, Zero Test Plates are ideal to test a coating thickness gauge’s functionality and calibration, ideal for when it may be difficult or impractical to obtain an uncoated substrate.
Request
Callback
Yes! I am Interested

Dial Thickness Gauge

Dial Thickness Gauge
  • Dial Thickness Gauge
Ask For Price
Product Price :Get Latest Price
We are engaged in providing the broad assortment of "Thickness Measurement" products. The Elcometer 124 Dial Thickness Gauge is used to measure the peak-to-valley height of a surface profile moulded in the Elcometer 122 Testex Replica Tape.
Request
Callback
Yes! I am Interested

Testex Tape

Testex Tape
  • Testex Tape
Ask For Price
Product Price :Get Latest Price
Testex Replica Tape is designed to provide a permanent mould of the surface profile, which can then be measured using a thickness gauge. Testex Tape consists of foam with a non-compressible backing. The foam side is rubbed into the surface providing a permanent mould of the peak-to-valley profile. The profile of the surface can then be measured using the Thickness Gauge. Testex Replica Tape is available in four profile ranges. It is important that the tape grade chosen is reflective of the profile being measured.
Request
Callback
Yes! I am Interested

Paint Inspection Gauge "PIG"

Paint Inspection Gauge PIG
  • Paint Inspection Gauge PIG
Ask For Price
Product Price :Get Latest Price
We are engaged in providing the broad assortment of Paint Inspection Gauge ( P.I.G.) designed to measure the thickness of single or multiple layers of coatings. Combinations of coating and substrate it is necessary to use a destructive measurement method. specific design to measure the thickness of single or multiple layers of coatings.
Request
Callback
Yes! I am Interested

Magnetic Coating Thickness Gauge

Magnetic Coating Thickness Gauge
  • Magnetic Coating Thickness Gauge
Ask For Price
Product Price :Get Latest Price
A well-integrated service support is provided from service centre with team of factory trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.
Request
Callback
Yes! I am Interested

Coating Thickness Gauge "Pull Off Gauge"

Coating Thickness Gauge Pull Off Gauge
  • Coating Thickness Gauge Pull Off Gauge
Ask For Price
Product Price :Get Latest Price

We are engaged in providing the broad assortment of Coating Thickness Gauges.

This simple, pull-off gauge is a top-pocket, lightweight, foreman’s type gauge for spot check indications of coating thicknesses.

 

v Insensitive to hot and cold coatings or surfaces

v ideal for hot sprayed metal coatings for immediate results

v Easy to use and lightweight

v 3 scales on the instrument body: mils, microns and linear

v Pre-calibrated with no adjustment required

Ranges : Three scales printed on the body: 0 - 600µm
Linear (0 - 10 equally spaced divisions)

Accuracy : ±15% of the reading

The amount of force needed to remove a magnet from a Ferrous Substrate and are basic “Coating Thickness Gauge” to measure coatings on steel.

Request
Callback
Yes! I am Interested

Coating Thickness Gauge "Banana Gauge"

Coating Thickness Gauge Banana Gauge
  • Coating Thickness Gauge Banana Gauge
Ask For Price
Product Price :Get Latest Price

We are engaged in providing the broad assortment of Coating Thickness Gauges.

This Coating Thickness Gauge commonly referred to as the "Banana Gauge," has proven to be a successful coating thickness gauge up to 6 mm where the use of electronic instruments is difficult to measures non-magnetic coatings, including paint, hard chrome, electroplating, galvanising, powder coating, plastic, epoxy and rubber applied to a ferromagnetic base.


The amount of force needed to remove a magnet from a Ferrous Substrate and are basic “Coating Thickness Gauge” to measure coatings on steel. The "v" grooved base, rubber feet and clear scale with its ranges for thicker coatings, make this instrument one of the most popular mechanical gauges in the world.


This Gauges does not required batteries to operate & It is Ideal for many critical area like underwater coatings inspection, Hazardous areas, Very cold surfaces, Inflammable atmospheres in oil and gas production


It is factory calibrated with user calibration adjustment & Also Calibration Foils supplied with Gauge to check calibration on site


A well-integrated service support is provided from service centre with team of factory trained customer support group headed by a Service Manager, who double up for technical & application support to our customers.

 

Request
Callback
Yes! I am Interested

Paint Inspection Gauge

Paint Inspection Gauge
  • Paint Inspection Gauge
Ask For Price
Product Price :Get Latest Price
PIG is a quick, versatile method of examination and destructive measurement of coatings in a portable, easy to use instrument. Ergonomically designed to give a balanced weight distribution for a consistent cut. it is ideal for tough coatings and enamels.
Request
Callback
Yes! I am Interested

Coil Coating Wet Film Wheel

Coil Coating Wet Film Wheel
  • Coil Coating Wet Film Wheel
Ask For Price
Product Price :Get Latest Price
We are engaged in providing the broad assortment of Coating Thickness Gauges. wet film wheel consists of a central eccentric wheel and two outer concentric wheels. The diameter of the outer wheels is greater than that of the central wheel. The gauge is rolled across the wet paint film and at some point the central wheel will touch the paint. A scale on the outside of the wheel indicates the paint film thickness at this point. Various measurement ranges from 0 to 25 µm to 0 to 1000 µm (0 to 1 mil - 0 to 40 mils) are available. Coil Coating Wet Film Wheel; similar to the wet film wheels, but the outer wheels are knurled to allow measurements to be taken on slippery coatings or on fast moving substrates.
Request
Callback
Yes! I am Interested

Hexagonal Wet Film Comb

Hexagonal Wet Film Comb
  • Hexagonal Wet Film Comb
Ask For Price
Product Price :Get Latest Price
We are engaged in providing the broad assortment of Coating Thickness Gauges.This gauge is a simple but effective instrument used to determine the thickness of wet paints and similar coatings immediately after application. The expected dry film thickness can then be calculated.

Wet Film Combs:
  • The edge of the comb is placed into the wet film and then removed. The thickness of the wet film is determined by examining the paint left on the teeth of the comb and the thickness scale marked on the front face of the comb.
  • Precision formed in stainless steel to be long-lasting and reusable, these hexagonal wet film combs are supplied in a range of thicknesses up to a maximum of 3000 µm (120 mils). This high upper value allows measurement of thick coatings which are difficult to test by other methods. An aluminium version is available this model is not as accurate as the high precision versions but it does provide a low cost alternative for measurement of wet film thickness.
Request
Callback
Yes! I am Interested

Wet Film Combs

Wet Film Combs
  • Wet Film Combs
Ask For Price
Product Price :Get Latest Price
We are engaged in providing the broad assortment of Coating Thickness Gauges.This gauge is a simple but effective instrument used to determine the thickness of wet paints and similar coatings immediately after application. The expected dry film thickness can then be calculated.
Request
Callback
Yes! I am Interested

WFT Combs

WFT Combs
  • WFT Combs
Ask For Price
Product Price :Get Latest Price
We are engaged in providing the broad assortment of Coating Thickness Gauges.This gauge is a simple but effective instrument used to determine the thickness of wet paints and similar coatings immediately after application. The expected dry film thickness can then be calculated.

Wet Film Combs:
  • The edge of the comb is placed into the wet film and then removed. The thickness of the wet film is determined by examining the paint left on the teeth of the comb and the thickness scale marked on the front face of the comb.
  • Similar to the it provides the user with more measurement points (teeth). These rectangular wet film combs are available in 3 ranges up to a maximum thickness of 1200 µm (50 mils) - supplied either separately or in a set of 3.
Request
Callback
Yes! I am Interested

Ultrasonic Probe

Ultrasonic Probe
  • Ultrasonic Probe
Ask For Price
Product Price :Get Latest Price
Ultrasonic Thickness Gauge Transducerslcometer has a wide range of transducers available for use with the Elcometer 205, 206 & 208 range of Ultrasonic Thickness Gauges. When selecting a transducer, it is important to choose one which will meet the application, taking the following into consideration.

Other Details:
  • The type of material to be tested
  • The design of the transducer probe
  • The measurement range
  • Whether the shape of the substrate is flat or curved or hard to reach
  • A range of frequencies and sizes are available to meet specific needs
  • Straight and right angle transducers available as potted or microdot

Speed of Sound Through Materials

  • Elcometer Ultrasonic Thickness Gauges can be calibrated by the user for the appropriate material in two ways:
  • Set the calibration to the thickness of the known standard of the same material
  • Set the frequency calibration to the appropriate value using the velocity chart below:

 

Product Details:

Material
km/sec
in/msec
Material
km/sec
in/msec
Air0.330.013Neoprene1.600.063
Aluminium (2024-T4)6.380.251Nickel5.640.222
Beryllium12.880.507Nylon2.690.106
Boron Carbide10.920.430Platinum3.690.156
Brass4.390.173Plexiglass2.690.106
Cadmium2.770.109Polystyrene2.340.092
Copper4.650.183Polyurethane1.780.070
Glass (Plate)5.770.227PVC2.390.094
Glycerine1.930.076Quartz5.740.226
Gold3.250.128Silver3.610.142
Inconel5.820.229Steel (4340)5.840.230
Iron5.890.232Steel (303 Stainless)5.660.223
Iron, Cast4.550.179Teflon1.520.060
Lead2.160.085Tin3.330.131
Magnesium5.840.230Titanium6.100.240
Mercury1.450.057Tungsten5.180.204
Molybdenum6.250.246Uranium3.380.133
Monel5.360.211Water1.470.058
Motor Oil (SAE 30)1.750.069Zinc

4.320.170

Request
Callback
Yes! I am Interested

Glass Thickness Meter

Glass Thickness Meter
  • Glass Thickness Meter
Ask For Price
Product Price :Get Latest Price
Digital Glass thickness meter is mainly used on measuring glass and air space in insulated glass (IG), single glass, double glazing, or insulating glass. it also can measure individual panes of glass and the thickness of a glass bottle etc, special for those situations where common ruler cannot easily do it.

    Feature:
    • Laser reflects on CCD to measure glass thickness and Air thickness
    • Measure Glass & Air Space (insulated glass) quickly from single side of IG Units
    • Accuracy: +/- 0.2mm
    • Large LCD, simple operation, easy reading result value
    Request
    Callback
    Yes! I am Interested

    Concrete Coating Thickness Gauge

    Concrete Coating Thickness Gauge
    • Concrete Coating Thickness Gauge
    • Concrete Coating Thickness Gauge
    • Concrete Coating Thickness Gauge
    • Concrete Coating Thickness Gauge
    • Concrete Coating Thickness Gauge
    • Concrete Coating Thickness Gauge
    • Concrete Coating Thickness Gauge
    • Concrete Coating Thickness Gauge
    Ask For Price
    Product Price :Get Latest Price
    We are engaged in providing the broad assortment of Civil Infrastructure process monitoring instruments. Concrete Coating Thickness Gauge reliably and NDT (up to 10mm) the thickness of coatings on concrete and other similar substrates like Drywall / Plasterboard, cinder block, concrete block, brick, and other cementitious substrates. Using state of the art ultrasonic technology, repeatably, reliably and non-destructively measure coatings, from 150µm up to 10mm (6 to 390mils) thick.
    Request
    Callback
    Yes! I am Interested

    Pfund Thickness Gauge

    Pfund Thickness Gauge
    • Pfund Thickness Gauge
    Ask For Price

    Plastic Wet Film Comb

    Plastic Wet Film Comb
    • Plastic Wet Film Comb
    Ask For Price

    Uncured Powder Film Comb

    Uncured Powder Film Comb
    • Uncured Powder Film Comb
    Ask For Price

    Steel Ultrasonic Thickness Gauge

    Steel Ultrasonic Thickness Gauge
    • Steel Ultrasonic Thickness Gauge
    Ask For Price

    Ultrasonic Thickness Gauge

    Ultrasonic Thickness Gauge
    • Ultrasonic Thickness Gauge
    Ask For Price

    Ultrasonic Thickness Gauge (206)

    Ultrasonic Thickness Gauge (206)
    • Ultrasonic Thickness Gauge (206)
    Ask For Price

    Ultrasonic Thickness Gauge (206DL)

    Ultrasonic Thickness Gauge (206DL)
    • Ultrasonic Thickness Gauge (206DL)
    Ask For Price

    Precision Ultrasonic Gauges (207)

    Precision Ultrasonic Gauges (207)
    • Precision Ultrasonic Gauges (207)
    Ask For Price

    Ultrasonic Thickness Gauges (208)

    Ultrasonic Thickness Gauges (208)
    • Ultrasonic Thickness Gauges (208)
    Ask For Price

    Ultrasonic Thickness Gauges (208DL)

    Ultrasonic Thickness Gauges (208DL)
    • Ultrasonic Thickness Gauges (208DL)
    Ask For Price

    Ultrasonic Transducer

    Ultrasonic Transducer
    • Ultrasonic Transducer
    Ask For Price

    Ultrasonic Transducer Option II

    Ultrasonic Transducer Option II
    • Ultrasonic Transducer Option II
    Ask For Price
    X

    Explore more products



    Reach Us
    Nimil Baxi (Business Manager)
    No. 301, Pacific Plaza VIP Road
    Kareli Bagh, Vadodara- 390018, Gujarat, India



    Call Us

    Share Us

    F GT L


    Send E-mailSend SMS